Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
View 8 Replies View RelatedI have set 3 conditional formatting rules where the row from column A to K will change depending on the value on column L.
Selection is equal to A3:K100, conditions are similar to:
- Formula is =$K3="PIP"
Then for formatting I chose WHITE BOLD FONT & BLUE SOLID PATTERN, for example.
Conditional formatting only allows 3 conditions. If this can be replicated
using VBA, then you can set "n" conditions, correct?
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
View 2 Replies View RelatedI have a large spreadsheet with a number of columns that are set up for conditional formatting. For example a column of "BUY"'s and "SELL"'s where the "BUY"s are formatted with the default "light green fill, dark green text". I have other columns that are conditionally formatted using a formula. When I base the result on a formula I don't seem to have the option to use the default formats. Is it possible to use the defaults or maybe even how to customize my format to look like the default? It would look a lot better if I had a uniform red/green style throughout the sheet.
View 1 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedAs a pert of a spreadsheet I have 2 columns (M5:N400) of 400 cells deep. Each cell in these columns contains a formula that counts days, when appropriate. They can end up showing a value of blank, a number between 0 and 5, or any number greater than 5. (But very rarely greater than 30)
If the number is greater than 5 then it means that it has exceeded it's target time and I wish to highlight this with conditional formatting (CF). I have a CF on all cells in both columns that says.
If "The cell value" is "Greater than" "5"... then
format the background colour to a pale yellow.
It works, but doesn't work.
If the cell value is 0 to 5 it's unchanged. Good.
If the cell value is >5 it changes. Good.
BUT, if the cell is blank it also changes. Bad!!!
I assume it is because it is looking at the fact that there is a formula in the cell, even though the displayed value is "". So I tried a second level saying that if the cell is equal to "" then no format, but it still changes.
How can I condition format a cell to show no format if the cell contains a date
Please see the attached book1.xlsx for more info. Book1.xlsx
In Excel, I want to do conditional formatting on a cell based on the value of another cell. For example: in cell A1, I have text. I want this cell to have a grey background if the value of cell B1 is less than or equal to 1/31/14 and to have no fill (default) if it is greater than that date.
View 8 Replies View RelatedI am working in a table where I would like the whole row to highlight based on the value in one of the cells. These rows of data will be updated regularly, so the formatting has to change with the data.
View 13 Replies View RelatedI want to create a conditional formatting based on a cell in a row. If the value of that cell is greater than or equal to $20 the entire row would be highlighted with a color.
the main thing is that the cells in the rows have if formulas that supple the data for the cells. The cells will be blank if nothing is to be displayed but they will still contain the formula.
I want to format a cell conditional on the value of another cell. I have read numerous threads on the topic and no matter what I do, it doesn't seem to work for me. I've made it a simple as possible by creating a new workbook and entering:
A1: 5
B1: 2
C1: Some random text - this cell has the conditional formula: ="A1>B1"
However, the cell doesn't get formatted. Here is a screenshot and here is the simple workbook.
I want to color format a cell based on a percentage value in another cell but I just can't get my head around how to solve it. I've attached a file that explains it better.
E.g.
The formatting for A1 should be something like:
If A2 is
> +/- 10% RED
+/- 6-10% YELLOW
+/- 5% GREEN
Attachment 214464
I am attempting to apply conditional formatting such that cell B3 is green if it is greater than or equal to cell B2, and red if less than cell B2. Then to apply this conditioning across the row of data (i.e. C3 >= C2 green, C3 < C2 red; D3 >= D2 green, D3 < D2 red; E3 >= E2 green, E3 < E2 red ... etc.). Needs to be formatted such that if I change the value in cell B2, the colour of B3 is automatically updated.
View 4 Replies View RelatedI am manually formatting column J depending on what data is entered into column K. If the number entered into the cells in column K are equal to or less than what is in column J, I format the data in the cells in column J with the green you see above. If the data entered in the column K cells are greater than column J, I format it in the red shown above.
So, how can I have Excel do this for me, format column J cells depending upon what is entered into column K cells? The caveat here is that I also don't want any formatting to occur until data is entered into column K.
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.
View 4 Replies View RelatedI'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
Exit Sub
Else.....................
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another
I have some problem with conditional formatting, basically what I'd like to do is color the cells, based on the value contained in one specific cell. I'm not able to make a formula that suits my job.
Basically I want to color code a cell if the value in a specified cell is between x and y.
I've attached a sample spreasheet: MrExcel.xlsx
I would like to be able to change the color of fill in a cell if there are 3 occurrences in cells. Attached is a sample.
In the attachment, if the cells A2, D2, G2 all have a number "1" in them I would like cell K2 to have a color fill for the cell.
The same would be for the other cells, if B2, E2, H2 all have the number "1", K2 should have a fill in the cell as well, same as if C2, F2, I2 have a number "1", fill K2.
I only want the fill color to be in cell K2 if all 3 of the cells, ex: A2, D2, G2 have a "1" in them. Also, some of the other cells may have a number "1" in them but I would not want them counted unless it is 3 of the consecutive cells.
I have a cell which I want to colour green if C6>9, yellow if O6>60 and red if BOTH C6 and O6 are above their respective numbers. The first two parts of this are obviously straight forward, but I cant work out how to get the third part of it to work.
View 2 Replies View RelatedI would like to have cells in a certain column turn green if the word in column J of the corresponding row = Not Changed".
View 4 Replies View RelatedI want to do conditional formatting based on two cell values.
i want to do conditional format the column 'R' based on clolumns 'J' and 'R'.
column 'J' is a text column named PRIORITY which can hold the values P1,P2,P3 an P4.
Column 'R' is nothing but difference of two columns 'M' and 'H'(both are time stamps).Column'R' is in below format.
=TEXT(M4-H4,"h:mm:ss").
column M and H are in below format:
eg: 9/11/13 9:41 AM
Now i want to format the column'R' like
if column J ="P2" and column 'R' > "00:10:00"(10 mins) =it should become red.
if column J="P3" and column 'R'>"00:30:00"(30 mins) = it should become red.
I want the font of a value in a cell to turn green or red based on the value of the cell below it - NOT based on a set value or range like all of the other examples are based on. I want to apply a formula or condition to the entire table.
Column a has the date for each value, newest date is row 1 and oldest date is row 250. Column b-k has the number value for each animal species we are tracking. If there are more animals than the day before, the value went up and I want the font to be green. If there are less animals than the day before, then value went down and I want the font to be green.
There are about 250 rows in each table and I have 4 tables. I thought I could do conditional formating but I can only find how to change font color based on a set value. For instance, for each day there are over 10 turkeys, then it would be green. That is NOT what I want, see below:
Mon 5 no color change
Fri 5 color change to green
Thu 4 color change to red
Wed 5 color change to red
Tue 7 color change to green
Mon 5
date looks more like this - col a is date, col b is turkey, col c deer, etc
Mon 5 4 3 4 2
Fri 5 3 4 2 7
Wed 5 2 7 1 0
Tue 7 4 6 5 9
Mon 5 1 1 5 4
I would think this is similar to daily stock prices, if data goes up then it is in green, but if the price goes down then in red. Not based on purchase price (set value), but based on previous days closing price. For this report, I only care about the change day to day.
Say I have the following....
12345678910
59465465495652505853
I conditional format the top number which in this case is 65, how do I highlight the number directly above it? Either by another conditional format or some formula that picks the number out. I've tried HLOOKUP and VLOOKUP, but its giving me spurious results.
Is there a way to shade a cell based on whether the adjacent cell is shaded? I found some ways to do this with VBA but I was looking for a non VBA solution if possible. So basically if cell C5 is highlighted yellow I would want cell D5 highlighted yellow too, regardless of the values inside the cell. Is this possible without VBA?
View 6 Replies View Relatedhighlighting dates on a premade calendar.
The calendar is made as below:
Tasks
1-1-2014
1-2-2014
1-3-2014
[code]....
The data table is given as below:
Tasks
Date
Task1
1-3-2014
Task2
2-14-2014
I need to highlight the cell in the calendar that matches both the task and the date in the data table. For example- in the situation above, D1 would be highlighted.
I would like to use Conditional Formatting to format a cell depending whether it past a certain time, such as 3:45 PM. Naturally, entering the time as the condition does not work. Is there a way to do this?
View 5 Replies View RelatedI am trying to format cells based on what is in them across the board. Is there a way to conditional format based on what is in certain cells? I have 5 columns. I need to color in every NA only in the rows that have 1 or less cells with a number in there. So if there is 2 cells in that one row that have a number in them then leave the whole row white. If there is only 1 number in that row and the rest are NA then color all the NA's in red......
View 4 Replies View RelatedLooking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.