Date Recognition In Referenced Cell
Nov 11, 2009
I have the following two formulas in a spreadsheet, which sum and count, respectively loan information within a certain date range. Both of these are working correctly.
My problem is in substituting the dates with cell references for dates located in a worksheet with a table of dates. The dates from this table work with simpler formulas, but I cannot get them to work here, regardless of how many () "", etc that I try....
View 9 Replies
ADVERTISEMENT
Jan 8, 2010
I'm having a problem getting the date to show up when I add the date as a referenced cell to a formula using CONCATENATE. The date shows up as a serial value instead of a date format. The formula that I'm trying to get to work is in cell J7 on the attached file.
View 3 Replies
View Related
Nov 30, 2009
I have a spreadsheet that uses data which is linked to dates on which events are being held.
So, event 1 happens on 5/12/09, event 2 on 6/12/09. What I would like is the spreadsheet to identify the next event occurring and copy the information into a different cell on the spreadsheet.
View 10 Replies
View Related
Aug 1, 2006
I do not write code in it, just use it for school and work on the most basic levels. I am trying to suck an Excel document into SPSS ( Statistical Package for Social Science) for my Engineering internship. I am logging temperature using Omega Engineering, Inc temperature probes. When converting the data recorded on the probe to excel, it does something funny. I will try my best to explain what it is doing. If you format the cell to general, it gives you this (38917). Then simply changing the format to date I get this (7/19). How do I change this to make it so the date is the only memory in the cell. I don't need the other number in there because when I suck it into SPSS it only sees the 38917 number and not the date. I need the date to do my statistical analysis on the data.
View 4 Replies
View Related
Sep 4, 2009
In the Yellow Cells, I am looking for a formula or Macro that will automatically recognise and give the correct Premises number. As an example, in the first block of Yellow cells, it should be MOR001&2; The second block should be MOR003 and so on...
One could copy and paste the Premises number for each premises, but with 100 entries or more, it becomes a tedious and time consuming task. An autonomous function to recognise the correct premises number would be much easier
In the end, this is to be used when drawing up a PIVOT so that one may easily pick up a premises number or numbers and their related charges
View 7 Replies
View Related
Nov 7, 2012
I have a spreadsheet where I need the end result to be auto filled after recognition of an adhoc "top up" amount. How do I get E7 (3170) to automatically recognise the insertion of C7 (3000) to give this result without having to manually update the formula in E7?
DATE
PURCHASE
ORDER
PRODUCTIVE
[Code].....
View 4 Replies
View Related
Nov 14, 2005
I am trying to reference a date in a formula that points to a sheet name.
See Below.
A B
November 11, 2005 ='11-11-05'!$v$35
How can I automate the date to pull from column A and place that value in the date for column B? Column B is the name of a different sheet in the workbook.
View 9 Replies
View Related
Dec 12, 2013
I'm trying to create a list that references an existing data set where I have staff listed month by month and based on today's date, imports only if there is data in that column. I have figured out how to check if the cell is blank or not, but what I want to do now is change the cell that is referenced in the formula based on the date. Here is the format of the spreadsheet I'm working with:
A
B
C
D
E
F
G
H
[code].....
In this case, the "Team 1" and "Team 2" and "Team 3" references what team they are on that month. If it is blank, they aren't with the company any longer. The formula I am using is intended to import this data elsewhere, and is formatted like this:
=IF(ISBLANK(B2), "", A2) - My understanding is that this checks to see if B2 has data, and if it does, it inputs the employee name (A3) in that cell.
My ultimate goal is to be able to change the column referenced after the "isblank" calculation based on the date. So if today is April 2013, I want it to check B2, but if it's December 2013, I want the formula to check J2. Is there a way to do this? I don't mind if it's two steps (like if I have to put the date somewhere in the spreadsheet in order to run the calculation), but ultimately it would be the type of thing I could do that would leverage the existing data set so that I don't have to maintain two different spreadsheets of information.
View 2 Replies
View Related
Feb 15, 2009
In cell A1 I have a number representing a column and in cell A2 I have a number representing a row. In A3 I wish to obtain the value from the cell referenced by these two numbers.
ie
A1 = 3
A2 = 4
A3 = value from cell C4 (column 3, row 4). How do I write a formula in A3 to look this value up?? I know about the range function in visual basic but I just want to be able to do this using a spreadsheet formula.
View 3 Replies
View Related
Oct 2, 2009
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
View 2 Replies
View Related
Dec 28, 2013
If C5 refers to the value in cell C100, C6 refers to the value in C110 ten rows below. C7 refers to C120, ten rows below that and so on. Is there a formula that you use within excel (not a macro) that allows me to copy the C7 formula to C8 so that C8 will reference C130?
I have tried using INDIRECT and OFFSET formulas but cannot do it without an absolute reference to a fixed cell, which defeats the purpose, since I can go into C8 and manually change it to =C130, C9 to =C140 etc.
Currently using Excel 2007 at work and Mac Pro at home. Thought about R1C1 reference, but don't even know how to change to that style on my Mac.
View 9 Replies
View Related
Mar 27, 2013
I have 15 files in a folder and need vba code which would open every file from the specified folder and add that file name in the row starting cell "D1" in the "Master File". Below is the code which opens the file from the folder, but need the updated code which will add the opened file name. Also can u pls update this code to not open the "Master file" which is in the same folder when it loops..
VB:
Sub Login_summary()
Dim MyPath As String, FilesInPath As String
Dim MyFiles() As String
Dim Fnum As Long
[Code] ....
View 5 Replies
View Related
Jul 10, 2008
In my excel sheet I have a list of where they go, which are basically excel cells.. i.e. A1 is the top left corner.
What I am trying to figure out how to do is, is there a way that I can get excel to see "A1" and then put it in A1 of another sheet on the bottom. Thus I get the same grid I have on the wall, making a map of my things.
Also, I could just cut and paste, but the problem is I'm working on organizing the stuff on the wall, and if I do it the way I want to, when I move things, they should automatically be moved on the chart.
So basically I need it to look at a cell for the reference, choose text from another cell (which will be concaternated(sp) text), and then place it in the referenced cell in the chart sheet.
View 13 Replies
View Related
Jan 2, 2008
I have a basic blank file which takes production volumes of a product as an input and breaks the figure down to give individual component usage as an output. It then uses this figure to tell the user the best configuration to hold stock.
This file is 'save as' each month as the month, year and filename (ie: 11.2007MPS.xls, 01.2008MPS.xls) and then the monthly production figures are entered.
Within this file there are 'comparison' worksheets, cells on this page look into the previous months file and tell the user where changes have occurred; showing the physical changes that should be made. This lookup is referenced to a cell that gives the previous month ('MPS INPUT'$D$13), this is filled in by the user.
At current I am using the Vlookup(Indirect formula:
=(VLOOKUP(B4,INDIRECT("'I:SCIPMPS["&'MPS INPUT'!$D$13&"MPSCOPY.xls]Row 2'!$A$2:$N$100"),5,FALSE))
Yet, this requires all the previous months’ files to be open which isn't really feasible in the long run. Solving this issue using custom 'add-ins' (as i believe have) is not feasible either since the file will be used by many users who are not amazingly I.T literate.
View 6 Replies
View Related
Feb 25, 2014
I need to create a cell reference which will allow me to specify a cell in a table by value (using indirect) and pull the value from a cell immediately one row over for use in a formula. Say I have a table Containing column A and B; I want to reference the value of a cell in column A (e.g. "Large Widget") and receive (in the formula) the value in column B (e.g. "41 cm^2").
View 4 Replies
View Related
Jul 10, 2014
Warhammer Quick Reference Desktop.xlsx
Its on book 2.
I'm trying to reference the Cryptek total that I got in the previous area, and put that result into the grand total army point formula. When I reference the solution cell, or even copy and paste the very same equation into it, and then proceed to filter the referenced cells change...
The obvious solution that i thought would work is write =D45 next to Cryptek in the point value column, then if I filter it SHOULD maintain the information from D45 except it doesn't.
View 11 Replies
View Related
Feb 9, 2009
I want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.
View 3 Replies
View Related
Apr 18, 2014
ATTACHMENT: Order Form.xlsx
I am creating an Order form for my job in Excel. On this form, it displays the Top 100 items for sale. All the basic functionality of the form is working fine, my real issue is with the order summary tab.
On this tab, I would like for any Items with a Quantity on the first Sheet to transfer to a summary on the Second sheet.
So far, I am able to get the data onto the second spreadsheet. My final question is, can make the items on the summary sheet go to the top available row? Basically if I have items in row 3, row 7 and row 9 - I would like for the items to automatically fill in rows 3,4,5 respectively. (on the second worksheet)
I have seen people make this happen (on this board even) but for some reason, when I try using those formulas I do not get the results I need. I have attached the file to this post.
On the Tab entitled "Adv Piano" this the product list. On that tab, customers can put a Quantity in column G for the items they want to order and that item's details, price, and quantity will automatically appear on the 2nd tab, "Order Details" in columns I - L in the corresponding row (this is already done)
I need the information in the columns I - L on the "Order Details" sheet to appear in columns C - G on the same sheet, in the same order but to fill in towards the top with the corresponding quantities, item details and price remaining in the same row.
Order Form.xlsx
View 10 Replies
View Related
Jan 16, 2009
I have the following formula in a cell that gives me a sum of items matching certain criteria.
View 3 Replies
View Related
Apr 6, 2014
Referenced cells returning zeros: can these be made blank or string data?
But why I still get the value 0 instead of blank cell when I press ctrl+shift+enter?
My formula = IF(U15="Bank", PROPER(E15),"")
and E15 = VLOOKUP(B15,'Customer Data'!$D$6:$K$100,3,FALSE)
View 5 Replies
View Related
Dec 11, 2009
I want a dialog box to have a label box reference a cell within a work sheet. This referenced cell contains a formula linked to other cells so it will change value.
View 14 Replies
View Related
Mar 14, 2014
Trying to get a problem solved to have a % discount & 'flat' $ discount apply to cell(s) referenced. Product A, B & C are available in 3 different materials. Objective is to allow each material's Max Discount column to apply discount(s) referenced in cell J3 & K3, but only in the order of applying the percentage discount BEFORE the 'flat' $ discount.
Formula in cell C3 works IF the cell "Range to apply discount" I3 = "B3". Works just fine if I allow only one cell to be displayed in I3, but ideally, I'd want this to allow the said discount(s) in cell J3 & K3 to apply to any cells mentioned (for instance, for Product A Material 1, Product B Material 2).
I had tried a drop-down menu using Data Validation, which in my actual project allows me to select ONE cell at a time (out of my list of options), which is okay, but it would be extra useful to have a checkbox option to select which ones to apply the same discount to, instead of creating a massive embedded IF function to have each product in each material find whether it's cell is referenced in 20 different places (if I just copy the already functioning single cell reference tool).
The scale in which I'd like to use this in would be to apply specific discounts for one product, but a different discount for another product or material, and allow the input cell I3 to include a checkbox drop-down option (like the filter/sort), but not remove the data in the table (Range A2:G5 in this example), so I can hide any unnecessary columns and print, showing certain products & materials having a 10% discount, while others having a 20% discount, with an additional $5 off, etc.
[URL] ........
View 2 Replies
View Related
Nov 21, 2006
I am looking at developing a table that has three possible options for different categories, being Yes, No and N/A. A yes score a certain percentage depending on what column it is, and the use of N/A changes the percentage of other scores. (i.e. A yes in column 5.1 = a score of 5, a yes in 5.2 = 5, a yes in 5.3 = 10 and a yes in 5.4 = 15. However if 5.4 is N/A then this amount is diveded amongst the remaining 3, i.e. 5.1 = 10, etc.)
View 3 Replies
View Related
May 14, 2008
I have an IF formula on one worksheet that refers to another worksheet (ex: =IF(Page1!$A13="";"";Page1!$A13). The problem is when I move data from one cell to another the formula becomes #REF. (ex: =IF(Page1!#REF="";"";Page1!#REF)).
View 6 Replies
View Related
Apr 25, 2008
I have a column of data (numbers) that are expressed incorrectly i.e 1,000 actually means 1, 0,3 actually means 0.3 and 15,500 actually means 15.5. I can make the first and second examples OK by using the replace command, but how can I check the number format of the cell and then make it change to what I want. All these numbers are in random order and sequence. I'm using the replace command in a macro, is there something I could put in the macro to solve my problem?
View 9 Replies
View Related
Feb 23, 2014
I have tried numerous versions of macros I found. Most get the same error of; Range object error or script error.
Here is the formula: VLOOKUP(C$13,VESSELS_DATA,ROW(30:30)-12)
What I would like to do:
1) double click to on the cell with the formula
2) goto the worksheet "DATA_TABLES" that contains the Named Range "VESSELS_DATA"
3) go down the rows until the c13 is matched
4) offset column the same as in the above formula "Row(30:30)-12"
View 9 Replies
View Related
Apr 3, 2008
I have 2 tables, 1 beneath the other - table 1 columns represent date ranges and their values. Columns and their data are alternating color coding. Table 2 references, by means of array formula, this data - IS it possible to include the font color as a result?
BCDEFGH503/0310/0317/0324/03609/0316/0323/0330/03712348Prod113,91113,69713,58213,4849Prod21,9241,8943,1151,86510Prod31,2601,2401,2301,22121Age (Days)22Prod1211391123Prod22624Prod326
Formula in H22 = '{=SUMPRODUCT(((H$5-$D22)>=$E$5:$O$5)*((H$5-$D22)
View 9 Replies
View Related
May 25, 2009
I play Keno a lot and have what is probably a very simple formula request. If I’ve got for example this result pasted into Excel: 06 12 15 21 23 27 28 31 32 34 48 49 54 56 60 67 68 74 76 77. How would I go about determining if a pair or two numbers had come in?
Say I was looking for 31 and 76, is there some way I can get Excel to recognize the two spot hit then post in response either 1 (in bold) if yes or 0 (not bold) if no the two did not come in together? Note this would not be only one or the other, they both would have had to hit at the same time.
View 3 Replies
View Related
Jul 22, 2014
if it is possible for vba to recognize the name of the file is into.
example:
You file's name is : Track
you change for : Music
Your code automatically recognizes that and change the code.
View 2 Replies
View Related
Jun 4, 2009
I have a bit of a complicated one here so I have attached my book, its probably easier to undertstand the query by looking at the book. Hopefully somebody can help me out here.
I have 2 worksheets:
A results worksheet - this contains all category of results, each category has been given a specific sort id.
A foreign worksheet - this contains all categories found on the results worksheet with sort id = 7.
Now the complicated bit. The whole exercise is too pick up the correct exchange rate for the foreign category (sort id 7). each foreign type has a specific number at the end of its description in brackets e.g (3).
At the bottom of the "results worksheet" is a key which says what type of exchange rate to use for this type e.g. (3) Price of CAD 22.9 converted using exchange rate of CAD 1.9645 = £1.
What I need to do is on the foreign worksheet, it to recognise the number in the item description, keep it in mind then switch over to the "results worksheet" find the keys at the bottom of the page (the key is not necessarily in the same place all the time!!), match the number in the items description with the corresponding key and then find the exchange rate.
As i said very difficult to explain, since I reletively zero experience with this kind of work in excel. Luckily I been muddling my way through a work project gradually thanks to a forum member here. so i hope we can keep this up!
edit:
two restrictions in the way this solution can be done:
1- Results worksheet can not be modified, but it can be referenced to using INDIRECT, and you can make any number of modifications outside of the results worksheet.
2. Any solution must be automatic.
/edit
I have attached my workbook and highlighted the bits I need to fill and the picks I need to pick up.
Would be ever so grateful if some1 could show me the light here.
View 14 Replies
View Related