I'm having a problem getting the date to show up when I add the date as a referenced cell to a formula using CONCATENATE. The date shows up as a serial value instead of a date format. The formula that I'm trying to get to work is in cell J7 on the attached file.
View 3 Replies
I have the following two formulas in a spreadsheet, which sum and count, respectively loan information within a certain date range. Both of these are working correctly.
My problem is in substituting the dates with cell references for dates located in a worksheet with a table of dates. The dates from this table work with simpler formulas, but I cannot get them to work here, regardless of how many () "", etc that I try....
I have two cells. Cell A1 contains ‘The date is ’ cell B1 is formatted in the date format, 2007-01-24. I need to concatenate these two cells so that on cell C1 I have ‘The date is 2007-01-24’ but whatever I try excel keeps on changing the date to a text value and hence I am left with: ‘The date is ‘This is the date'39141 or this is the date 39141. how to get to the result that I am after?
View 5 Replies View RelatedI am trying to concatinate a cell to show both text and date (in format mmmm dd yyyy) using a vlookup from another worksheet.
Below is the coding I have in the cell:
="High Importance Request - effective " & VLOOKUP(1,'Fuel Surcharge Key Dates'!$A$6:$E$65536,2,FALSE)
The result I get in the cell from the formula is: I still get it to come out to 39327 instead of June 4 2007
The vlookup in the formula above retrieves a date that has a cell custom formatted to mmmm d, yyyy ... as this cell is not a date that is entered by a user but is further retrieved by another vlookup of dates. Even if I place the VLOOKUP in cell A3, reformat that cell to be a date and change the coding in the formula to:
="High Importance Request - effective " & A3. I still get it to come out to 39327 instead of June 4 2007
I am trying to reference a date in a formula that points to a sheet name.
See Below.
A B
November 11, 2005 ='11-11-05'!$v$35
How can I automate the date to pull from column A and place that value in the date for column B? Column B is the name of a different sheet in the workbook.
I'm trying to create a list that references an existing data set where I have staff listed month by month and based on today's date, imports only if there is data in that column. I have figured out how to check if the cell is blank or not, but what I want to do now is change the cell that is referenced in the formula based on the date. Here is the format of the spreadsheet I'm working with:
A
B
C
D
E
F
G
H
[code].....
In this case, the "Team 1" and "Team 2" and "Team 3" references what team they are on that month. If it is blank, they aren't with the company any longer. The formula I am using is intended to import this data elsewhere, and is formatted like this:
=IF(ISBLANK(B2), "", A2) - My understanding is that this checks to see if B2 has data, and if it does, it inputs the employee name (A3) in that cell.
My ultimate goal is to be able to change the column referenced after the "isblank" calculation based on the date. So if today is April 2013, I want it to check B2, but if it's December 2013, I want the formula to check J2. Is there a way to do this? I don't mind if it's two steps (like if I have to put the date somewhere in the spreadsheet in order to run the calculation), but ultimately it would be the type of thing I could do that would leverage the existing data set so that I don't have to maintain two different spreadsheets of information.
I am using the concatenate function, however my date field, instead of maintaining its 08/07/07 state, changes to the annoying 5 digit 33935 number.
Even if I cut and paste it as special / values, it stays as the 5 digit number. Can this be avoided somehow?
I am concatenating a date with some text. However, after concatenating, the date becomes a text string. How do I preserve the date format? Pls see the attached file.
View 3 Replies View Relatedi have this concatenate problem from dates... see the attached file. if i copy and paste as special value.. it puts the date values aswell.. i cant seem to put there only numbers.. if i wanted to use concatenate..
View 2 Replies View RelatedI have a date, 03/17/2007, in column A
I have the word, Cashiers in column B
I want to concatenate the 2 and use this in a vlookup. Can this be done? If so could someone explain please?
I keep getting the N/A error on this.
when i concatenate two cells (the word "excel" and today's date), i get
excel 39183...? i would like: excel 4/11/2007
how can i merge Date 1 and Time 1 into a cell ? And give me mm/dd/yyyy hh:mm format? And then a subtraction on 9/3/2008 0:00:40 - 9/2/200823:31:25, which give me a hh:mm:ss result?
View 5 Replies View RelatedWhat i need is to be able to concatenate a field such that it includes current system year,month,day and time. My attached spreadsheet illustrates my current formatting to achieve year,month,day. But I seem to be challenged in getting the current time to display properly.
View 4 Replies View RelatedSay in L4 on form test i want to look for the value of A4 in Drill data range a2 to z1000 and retun a concatenated string of something like "sav 407 : 08-may to 11-may"
View 3 Replies View RelatedI have attached a spreadsheet illustrating my query.
I would like to run a sub procedure called generatedataset then I'd like to enter a date from column J (starting from J4) into G12 ( cell G12 is a named range called effective_date). Then enter the concatenation of the adjacent cells K4 and L4 and place this into cell G9 (cell G9 is a named range called dataset_name). Then call the procedure again. Repeating for all values in range starting at J4 extending down, and for all corresponding concatenated values in K and L.
Data would always be taken from columns J or K&L and placed in the same cells ie G12 (named range effective_date) and G9 (named range dataset_name) respectively.
I have the following formula:
=CONCATENATE("EXP: ",TEXT(AK2," MM/DD/YY")," ","VP DATE ",TEXT(AL2," MM/DD/YY"))
But if both cells are empty I get : EXP: VP DATE
If only one is empty, i get EXP: 08/26/19 VP DATE or EXP: VP DATE 06/27/14
But I do not want EXP: or VP Date text to show if the content of the AK# or AL# is empty. I figured I will place something like If(ak#="","",
But it give me a "Too many arguments" error.
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedFirst and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
I have the following columns that return cover period dates.
Start of Cover PeriodEnd of Cover Period01-Nov-0631-Jan-0701-Jul-0831-May-0901-Dec-0930-Jun-1001-Jan-1131-Dec-10
I however need a macro that will delete the cell contents if the "Start of Cover Period" (column AK) date is > than the "End of cover period" (column AL) date.
Thus it must compare ak2 with al2 and if ak2>al2 then clear both cells. if AK2
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
I have a spreadsheet where we will be inserting the Arabic Hijri date taken from a Customs document (bayan). On my spreadsheet I'd like to have a column immediately next to the Hijri date that would convert the Hijri date to the Gregorian date so both dates will be visible for our Arabic and Western personnel who will be using the spreadsheet.
I am using Microsoft Excel 2010.
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies View RelatedI am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedIf a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies View Relatedi am trying to create a forumla in a column (D in my expamle below) to count the number of days between two dates. Knowing that col D will change everytime the @now date changes - but thats ok..
COL A COL B COL D
ROW 1 Open Date Closed Date Count of days open
ROW 2 4/1/07 BLANK CELL Formula result here
ROW 3 4/1/07 9/5/07 Formula result here
if col b has a date then subrtract col a from b and display the # result, if col b is blank then subtract col a from location I store the @ now date - say Col ZZ Row 99? so no matter there is a count of number of days in every row in column D
I have column B with a heading "Days Remaining" and column L with a heading "Deadline". starting with row 5, I need to be able to enter a date in L5 and see the days I have left, from that day untill today, on B5. I need to then be able to enter a date into L6 and see a result in B6 and on and on. Then I need to be able to insert or delete a column and have the formulas still work in the columns with the heading "Days Remaining" and "Deadline"
View 7 Replies View RelatedI have a user form that when a command button is clicked it enters the data from the from into coloums a,b,c,etc. I have code to do this but I want to add code to add a static date in coloum B based on if coloum A had data entered from the form. I need the date not to change to current date when the file is reopened. I am trying to elimate a date text box in the form. I have a link to the file http://www.box.net/shared/zdtsjv0qos
View 7 Replies View RelatedI have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies View Related
