I tried to make use of the indirect function but don't think this is the right type of formula to be used.
Essentially in column A..i have linked cell references
e.g = D2767
However, for the whole of the column I'd like to change the refs to =$D$2767, ALL in column A in one go.
I know that if you place the cursor in one cell immediately after the = sign and press F4 it automatically adds $ SIGNS TO THE CELL, which I find useful for V-lookups, but I obviously cannot do it (fill it) all the way down the column i'm using excel v7.
In addition or related how would I write an IF formula to read eg.
= IF (cell ref begins with C, then link and add PRECEDING AND FOLLOWING $ signs to all refs)?
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
Using the attached example, how do I get Excel to display in cell F8 the correct SUM of cells F4 & F5 without having to manually enter the SUM in column F. I need F8 to the be the SUM of the amounts that are displayed.
Is there an easier way to sort a column full of numbers by their absolute value without having to create an additional column, use formulas to get the absolute, then sort that column and then delete it.
I'm trying to solve a strange problem in a piece of code.
I have a variable that is define as Double called STD. When i try to insert that variable in a formula the decimal sign (for me a comma "," because I'm Portuguese) gets converted to ";" (which is for me the separation sign for the expressions in excel formulas. ex: AND(A1>0;B1>0)=TRUE). The code is:
In a formula, what effect does putting a plus sign after an equals sign? e.g. =+((1+B8)^12)-1. I orginally assumed that it made sure that result the would always be positive but I was wrong.
I have copied over a row of $, ($) amounts from one worksheet to another. I am trying to make the amounts I copy over past in absolute values. Is there a way to do this? Below is the current code:
'copying over the Amount in Local Currency ST Reclass Sheets("Recon_ST").Select Range("S9").Select Range(ActiveCell, ActiveCell.End(xlDown)).Select Selection.Copy Sheets("ST Journal entries").Select Range("J2").Select Selection.PasteSpecial Paste:=xlPasteValues Application.CutCopyMode = False
I am trying to calculate the average of the absolute values of a range of visible cells. I use filters to extract the data rows I need from a large spreadsheet. Then I need to calculate statistics on the resulting data, i.e. the visible cells. The line I am using to calculate this is:
However, what I get back is simply the value of the first visible cell in the range, i.e. the average of the absolute value of one number is that number. how to make this work
Have a query that pulls general ledger data. Named Range SALES defined for Sales Account numbers. What is the best way to always have SALES (which pulls as negative number) converted to absolute values?
I have in my mind that it would be some sort of worksheet change event . . . but I don't really grasp the byval/byref TARGET concept by itself, let alone whether it can work on a named range.
I work in a fruit and veg business and they are using parchment and quill still, well it certainly feels that way. I have been asked by customers to provide an online order form which i will email to them and they can fill in and email back, i scanned an invoice and used OCR to upload it to excel and it has come out quite well.
Basically there are three columns of product lines and then directly to the right of each product is a column i have entitled Box & KG respectively, if the customer types a number into the box column i want it to automatically add 'Bx' to the end so this if they typed 5 in a cell in the box column it would look like this '5 Bx' (obviously without the quotes), and the same for the KG column but it would denote 5 KG instead, also i would want it to add in the space as well after the value.
I have two tabs BIN QTY and ORDERS. On the ORDERS tab Column A is the order number and is duplicated several times depending how many line items are on the order. The second key is Column H which is the part number which is unique per sales order. I'm trying to use these two values to look up or find the matches on the Bin Qty tab.
-The data in Column A (order tab) gets compared to Column B (BIN QTY tab) -The second match is the Item no. Data Column H (order tab) to Column C in (BIN QTY tab).
-Once both values match it needs to pull the value from column G (BIN QTY tab) and enter it in column N (ORDERS tab).
My example is highlighted in blue with the result in green. I've tried several different index and match formulas with no luck. my Last was
=IFERROR(INDEX('BIN QTY'!$G$1:$G$7957,MATCH(ORDERS!$A1,'BIN QTY'!$B$1:$B$7957,0), MATCH($H2,'BIN QTY'!$C$1:$C$7957,0)),0) MY ORIGINAL SHEET IS MUCH LONGER
I have a VBA module in Access that extracts data and copies to an Excel spreadsheet. Every time I run the code additional data is extracted and displayed on a chart together with previous data. When I enter values to the series collection the first axis be it X or Y is entered correctly but the second axis produces error 1004 'unable to set XValues property of the series class' If I swap the lines of code around the error switches to 'Values' (y axis)
I have a simple count formula which is suppose to be absolute. =COUNT($L5:$V5) and works till I add a column via a macro. Macro adds a new column at column M then inserts data. My problem is when I check the formula after macro it changes to =COUNT($M5:$W5) I thought using the $ sign means Don't change?
I have a home finance spreadsheet that I've been using for a few years and in the last couple of days it's ground to a halt. Whenever I enter a value in a cell and hit [ENTER] there is a long delay with the spinning wait icon (Windows 7) and the Excel window reports "Not responding". Eventually (3-4 minutes) the update occurs and everything is fine.
The workbook has 9 sheets on it but only one summary sheet references the others. The sheet I'm updating has about 2200 rows, 50 columns and the formulas are simple A+B-C types. Performance DOES NOT improve if I change recalculation to manual. The only VBA is some macros to perform tasks and they don't execute dynamically. Adding comments and changing formats responds immediately, it is only updating values that exhibits the problem.
I've tried replacing all formulas with their values (paste special/values) across the sheet but again this didn't work.
I have created a budget template. In some instances, a discount is offered when more that x amount of products are ordered ( it varies,so I'll have to change the macro for each instance). I'd like to have a pop up box appear ( and dissapear again when pressing 'enter') that gives a notification like: a discount is applicable, select'
my cell with entered amount is "I54", and want a message if entered above 5
I tried the below and swapped places between sentence 1 and two as it doesn't seem to recognize subname, or sub start, or it just dissapears from my macro list ( although still a module): ( in the below order, it stated it expects the sub to end after sentence 1, if i remove sub popup () ( the title) ut just deletes the thing from my macro lsit,w hat is goign on!, and it just wont work)
'Sub popup() Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range
the code of how do stop saving a report if the spefic cells are not filled.
For ex: In a excel sheet in we have A1,A2,A3 there should be some values else its should not save and should show an alert stating that this cell is empty....
1. The Text to column function and separate values by the ";" sign
2. Then separate the first column ( which contains both date and time ) into their separate columns.
3. The 2nd step will result in values such as "mm/dd/yyyy 0:00" and "hh:mm:00" followed by an "AM" or "PM" which is unnecessary. The code should clean up the resulting date and time into "mm/dd/yyyy" and "hh:mm" respectively.
4. Flip the rows upside down so that time is decreasing downwards.
The resulting spreadsheet should contain 6 columns and should look like:
how to get either the absolute row or the absolute column of a cell.
Suppose the active cell is H27. If we use:
ActiveCell.Address we will get $H$27
How can we get either $H or $27 only assigned to a variable let it be MyVar.
Please keep in mind that converting the $H$27 to a string and then making string manipulations is not accepted, unless of course it's the only way to go.
Also it would be nice if I get answers on how to get the relative address column/row portions only, too. Like H or 27.
Another tip is that using .Column returns a number, not a letter.
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
I have a very frustrating problem with my business plan i am writing in Excel. every so often it crashes and when I open it again all the £ signs have turned to $ signs and i have to go through and painstakingly change them all. This also happens even if I just close the file carefully and open it up again. I have tried looking in preferences to see if there is a default setting but can't seem to work it out. can anyone help me with this tiresome issue?