Error Handling - Works First Time But Not The Second?

Feb 26, 2014

I am trying to handle an error. It works the first time but when it runs in the same error again it does not go to the error handling.

[Code].....

View 6 Replies


ADVERTISEMENT

VB Works On One PC, Not On Another (Run-time Error 9 )

Apr 15, 2009

I run PCs at work and at home. Both machines run Windows XP and Office 2007

Home PC: Windows XP Home edition Version 5.1 (Service Pack 3)
Excel 2007 SP1 MSO

Work PC:Windows XP Professional version 5.1 (Service Pack 3)
Excel 2007 SP1 MSO

The VB was created on the home PC. It works. On the Work PC it crashes on the line with bold. Run-time error 9 - Subscript out of range. This have never happened before (or with any other VB routine). I also changed fileNew to include the full path, but same error. What has caused this? I suspect it’s the 'fileNew'.

View 4 Replies View Related

Error Handling - Only Want To Check The Error On Single Line?

Sep 12, 2012

So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.

View 3 Replies View Related

Error Handling On Error Goto 0

Jun 29, 2006

error handling ?what actually does the following do...? On Error Goto 0

View 2 Replies View Related

VBA Add Error Handling To A Loop

Jan 17, 2014

My current code opens a file ("Report01.CSV") from the directories in column A (one at a time), and copies data into sheet 2.

The problem is that sometimes there is no ("Report01.CSV") file in one or more of the directories.

What I would like to add is an error handler that would remove the directory (delete that cell) that caused the error and continue with the loop. I.e. resume importing data from the other directories.

CODE:
Dim wrkMyWorkBook As Workbook
Dim lngRow As Long: lngRow = 1
Dim lngColumn As Long: lngColumn = 2

Do Until Sheets("Sheet1").Range("A" & lngRow).Value = vbNullString
Set wrkMyWorkBook = Workbooks.Open(Filename:=Sheets("Sheet1").Range("A" & lngRow).Value & "" & "REPORT01.CSV")
lngRow = lngRow + 1

[Code] ......

View 9 Replies View Related

Error Handling Using Cells.find

Oct 12, 2008

The On Error GoTo works if there is only one instance of the text not being found but crashes if there is a second.

I have tried adapting code found here http://www.excelforum.com/excel-prog...ght=cells.find but can't get it to work exactly as i would like.
Here is an extract of my code. There are about 12 different cells.find in total.

View 2 Replies View Related

Error Handling When File Already Open

Feb 27, 2012

I recorded a macro to save a worksheet as a PDF file

It works fine, except when the PDF file is already open - Excel returns an error message and stops.

Can I use some error handling code to prevent the error, maybe bring up a msgbox and exit the sub at the point where the error occurs?

The part of the code where it stops is:

ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _
"C:UsersDaveDesktopTestingDemo List.pdf", Quality:= _
xlQualityStandard, IncludeDocProperties:=True, IgnorePrintAreas:=False, _
OpenAfterPublish:=False

View 2 Replies View Related

Get Pivot Data In VBA - Error Handling

Oct 26, 2012

I am writing a code in VBA using getpivotdata function. It is working fine untill the value does not exist.

Dim pt As PivotTable
Sheets("Pivot2").Select
Set pt = ActiveSheet.PivotTables(1)
Cells(2,1).Value = pt.GetPivotData("ID", "GCB", "1", "Gender", "F", "9 box Rating_2012", NBArr(k)).Value
'the code is looping through the values in an array called NBArr

I have tried to handle this as follows:

If IsError(pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value) = True Then
Cells(2,1).Value= "0"
ElseIf IsError(pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value) = False Then
Cells(2,1).Value = pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value
End If

However, even this is not working (in case when the function finds no value).

View 1 Replies View Related

Error Handling With Failed Vlookup?

Apr 3, 2013

I'm looking for some direction with enhancing this code:

Code:
Case "L18"
Dim dfcust As String
Dim wshgrp As Worksheet

[Code]...

With this code, wshmain.range("Y18") is populated with the value associated with the vlookup. However, problems exist when the vlookup fails. If the vlookup fails, I don't want to try to populate wshmain.range, just simply .protect and abandon.

View 4 Replies View Related

VBA Error Handling - Opening Files

Jun 25, 2014

I am working on a worksheet with quite a few advisors who will be using the sheet, because of this reason I am trying to cover my back with as much error handling with my VBA script as possible. Where I am struggling is the following line:

Code:
Set cb = Workbooks.Open("wilm-dchome"UserName"DesktopCurrent projectPipeline Grouped.xlsm")

I want to have an error handler that says if this file cannot be found use the following line of code instead:

Code:
Set cb = Workbooks.Open(Application.GetOpenFilename())

It may even be just a simple if statement instead but I cant seem to find the answer.

View 2 Replies View Related

VBA - Error Handling: Determining The Sub Procedure

Feb 13, 2007

In an error handling procedure, I want to be able to capture the name of the Module and Sub procedure (macro) that the error has occurred in.

Is there any way to do this, outside of storing the name of the Sub somehow in a variable?

The Err.Source method seems to only contain very broad information, such as "VBA Project" when an error is encountered.

View 9 Replies View Related

Error Handling Of Advanced Filter

Apr 21, 2009

If there are records meeting the criteria are found, they are to be copied to a 2nd worksheet. Otherwise, the remainder of the code is to be executed.
I am getting an error "No Cells were found" (which is true since the autofilter doesn't net any results) with the line highted in red.

Consider this snippit of
'
' courts
'
Courts:
Dim lcrtcopy As Long
End_RowDest = 0
wshV.Activate
ActiveSheet.Unprotect
With Worksheets("Crts_Temp")
If .FilterMode Then .ShowAllData 'disable advanced filter of data if applicable
End With..........

View 9 Replies View Related

Error Handling (Close Without Save)

May 12, 2009

I've got some code that reformats a file that a supplier sends us. They seem to randomly change the structure, so I'm trying to make the code a bit more robust.

Part of the code uses MATCH to look for specific column headings, so I've got some error handling around this of the format:

On Error GoTo NoIncCol
Line using MATCH
On Error GoTo Exiting
where Exiting is my standard error handling (Close without Save) and NoIncCol is the same, but with an error message saying that the term the code was trying to MATCH can't be found. This works well for me.

In another part of the code, I need to check for another column heading, which so far has turned up in two different forms. At the moment I'm doing this as follows:

With Sheets("Sheet1").Range("1:1")
Set rFound = .Find("Term1")
If Not rFound Is Nothing Then
a = "Term1"
Else

This feels a bit clunky, and I don't really like having what is essentially error-handling in the middle of my code. But the only other way I can think of to do it is to use a GoTo, and I believe that's not really considered good practice either.

View 9 Replies View Related

Application-wide Error Handling

Feb 21, 2007

I am creating a rather large system that is as OOP as I am able to with VBA (Please let the next version of VBA use .NET!).

I have created an ErrorHandler object that deals with all logic/user errors and I have decided to include runtime errors in it's scope as well.

Now I have an object function to catch all errors as such:

Public Function CatchAll(E As ErrObject)

Select Case E.Number

Case xxx

...

Case Else
MsgBox E.Number & ": " & E.Description & vbCrLf & E.Source

End Select

End Function

Now I have added the following to every single procedure and function in my application, and have realised how ridiculous it is.

On Error Goto ErrorHandling

...

ErrorHandling:
ErrorHandler.Catchall Err

Is there a way to add a single global ErrorHandling statement somewhere in my code that will be called whenever an error is raised?

Perhaps in my main module that fires all code, can I put a small procedure that will handle the errors? Or as a function in my ErrorHandler class that I call on initialisation?

View 6 Replies View Related

Save As Error Handling Through Input Box

Mar 1, 2007

I need to:Turn off "save" and "save as" command barsPrompt user for a unique filename Save file to a specific directory on the network common to all "p:dataprc"Requery user if filename exists and if they DON'T want to overwrite.Return to worksheet (there is only one) if the user cancels from the message box.Turn commandbars back on The macro runs from an on screen button
I get bug errors on NO or CANCEL when clicked in the message box. This is my current

Private Sub Workbook_Open()
Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save As...").Enabled = False
Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save").Enabled = False
End Sub

Sub SaveMe()
'
' Keyboard Shortcut: Ctrl+z
'
Dim BaseDir As String
Dim NewName As String
BaseDir = "p:dataprc" ...........

View 7 Replies View Related

Error Handling With Find Method

Jun 20, 2007

I have a UserForm (and associated code) to locate a specific entry in Column 'A' of a spreadsheet and insert a date, initials, and hyperlink to another file.

The basic code works fine, but did not account for the user entering a Job# that was not in the system, so I added an If/Else to account for this...
The additional code took the If (Job# not found) route every time...
Following many hours of searching this site and variations of the error handling code, I still can not get it to work.

So I'm asking for your assistance to point out why the error handling (based on other successful code found here) is not working for me.

'Insert Link
Private Sub CommandButton3_Click()

If TextBox1.Value = "" Then
MsgBox "Please Insert a Job#"
Exit Sub
ElseIf TextBox2.Value = "" Then
MsgBox "Please Insert Quoters Initials"
Exit Sub
ElseIf TextBox3.Value = "" Then
MsgBox "Please Insert Quote Date"
Exit Sub

The 'Find' part of the code is working, as the correct cell is selected after running the code... but it gives the error message, instead of executing the rest of the code...

If I remove the 'On Error Resume Next', it stops on the find block, where on inspection FindR = Nothing.

So if FindR does = Nothing, how did it manage to select the cell?

View 9 Replies View Related

Handling Time Goes To Negative Using VBA

Jun 11, 2009

My worksheet takes a time feed in the format '00:01:05' and I want to trigger an event when it goes to negative (eg, -00:01:05). But I have no idea how to handle it.

View 9 Replies View Related

Handling Error (#VALUE) In Formula With Blank Cell?

Oct 9, 2008

When I enter this formula I get a #VALUE! error. I think it's because cell AG46 has an IF formula that results in "blank" if 0. How do I fix this error so that it includes cell AG46 and if cell AG46 is blank it counts it as a zero?

=SUM(A12)-(AG46*8)(=40 is the answer I'm looking for)
=SUM(40)-(0*8)

View 3 Replies View Related

Error Handling - Checking If Workbooks Open

Nov 25, 2013

I'm trying to add a little error handling in my code. I have a macro that, when running opens a number of workbooks. At the end of the macro, my code then closes all the workbooks I've opened.

I was wanting to create an error-handling procedure that displayed a message box, and then closed any workbooks that I've opened during the course of the macro. Obviously the error could trigger at any point, so not all workbooks may have been opened at the time

My code is as follows - I've tried On Error Resume Next in the error-handling code, but Excel still returns an error that it can't find the Incidents_MTD sheet when trying to close it.

Code:
On Error GoTo ReportError
code
code
code
ReportError:

[Code].....

View 4 Replies View Related

Handling Error If 2 Cells Are Accidentally Selected

Jul 27, 2008

what i could do to the code below so that if 2 cells are accidentally highlighted - it wont come up with a type mismatch error on the line below in red.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

With ThisWorkbook.Sheets("price").Range(ActiveCell.Address)
If .Value = "" Then
UserForm2.TextBox1.Value = "No Trade Selected"
Else
UserForm2.TextBox1.Value = Format$(WorksheetFunction.RoundUp(Val(Sheets("price").Range(Target.Address).Value), 2), "$ 0.00")

End If
End With

End Sub

View 9 Replies View Related

Error Handling For Data Validation List

Jun 19, 2009

I have a excel document that is very heavy with Data Validation List Boxes. Below is just one example. Error handling is what I am trying to figure out.
Description:
I have 3 List Boxes.
One list box data is based on data selected in the previous list box.

1st List Box uses this formula: =Series
2nd List Box uses this formula: =INDIRECT($C$2)
3rd List Box uses this formula: =INDIRECT($C$3)

It all works! HOWEVER....
If user decides to go back and change selection in first or second list box, and forgets to change the data in the second or third box, then data will be incorrect. How do I solve this problem?
Is there anyway to write something so it would give them an error message and instructing them to correct the data?

View 9 Replies View Related

Msgbox Doubleclick Resume Error Handling

Feb 1, 2007

The following code shows the bare bones which illustrate my problem. The routine runs whenever the user enters a string which begins "Frm1=" and contains exactly three commas.

My problem is with the MsgBox which appears if the ErrorHandler is reached. With the following code the MsgBox requires two clicks on OK to dismiss it. If I change Resume to GoTo it requires only one. Is this normal? Is there any way of dismising the MsgBox with one click? ...

View 9 Replies View Related

Error Handling Doesn't Work Properly

Jul 9, 2007

I've written the following bit of code but the error handling doesn't work properly: ....

View 9 Replies View Related

Handling Gaps In Time Series Data

Dec 21, 2006

I have been browsing here off and on, and have found many excellent answers. I use Excel to process data on time series, as an adjunct to consultancy work on statistical analysis of industrial data . Usually the data has irregular gaps, e.g., daily data might have 2-10 day gaps. If I want to take, say, 7-day averages, SKIPPING OVER gaps longer than 2 days(say), is there an easy way to do this (I don't really know VBA,and it is not worth my time to try and write long code for this, which will eventually be done by some professional programmers)!

View 9 Replies View Related

Excel 2010 :: Error Handling Routine Which Stores Name Of File

Jun 3, 2014

I have written a VBA procedure which loops through excel files in an array: in turn it opens the file, refreshes the data, saves the file and closes. I would like to write an error handler which stores the file which errored (copied from the loop iteration) and the error description to an array. The error handler should then close the file and continue with the next iteration - e.g.

Code:
If ActiveWorkbook.ReadOnly Then
ActiveWorkbook.Close
Next i
*Although a generic if error may be better.

My idea is that all files which errored in some way will be stored in an array which I can automatically print/send to a user so they can manually figure out the problem. (This element falls outside the range of this query).

Below is a simple example of my efforts which only contains one file in the array to make things simpler: the error handler section won't work, it's just there to show my thinking

Code:
Sub Refresh_CRIS()
On Error GoTo Errorhandler
Dim routepath As String
routepath = "
chdfsSharedAreaPrivateTest"
ChDir routepath

[Code] ........

Errorhandler:
On Error Resume Next
Failed = Array(i)
If ActiveWorkbook.ReadOnly Then 'Just an example for testing
ActiveWorkbook.Close
Else
MsgBox "Pivots which failed to refresh:" & Failed '& ", ", 0, "Debug" 'Test with msgbox
End If
End Sub

Using Excel 2010

View 5 Replies View Related

Error Handling Within Errors (macro To Create New Worksheets In The Workbook)

Aug 12, 2009

I am currently creating a database which involves using a macro to create new worksheets in the workbook. When the macro is run and a work sheet is being inserted, an input box asks the user for a worksheet name.

As you can imagine, the worksheet does not like it when the worksheet name input by the user, is the same as one already existing and so throws up a 1004 error.

In order to resolve this error I have included an error handling code to request the user to input a differnet worksheet name, as the one previously inserted exists.

My problem: It all works fine until the user types in an existing worksheet name twice, so once initially and again when the error handler has prompted a second attempt. On the second incorrect input a 1004 error warning is displayed.

I would like the error handler to keep repeating until a worksheet name that doesn't exist is inserted by the user. Is this possible?

My code so far:

Sub NewTrancheSheet()
'
Sheets("Tranche Sheet Template").Visible = True
Sheets("Tranche Sheet Template").Select

Sheets("Tranche Sheet Template").Copy Before:=Sheets(1)

Sheets("Tranche Sheet Template (2)").Select
Sheets("Tranche Sheet Template (2)").Move After:=Sheets(Sheets.Count)
Sheets("Tranche Sheet Template (2)").Select.................

View 9 Replies View Related

Improve Error Handling (give A Short Explanation To The User)

Feb 18, 2007

Improve Error Handling...

i would like to improve my error handling efforts (such as give a short explanation to the user, etc.)

Private Sub btn_SaveFile() ...

View 4 Replies View Related

Function Works But Get Runtime Error 13?

May 20, 2014

This is a function to add the ascii values of a string to give a single value. Initially I wrote this as a Sub routine and it worked fine, but when making it into a function, I get this error. From a little research it appears that you can not use a string as an argument for a function call, yet that defeats the object of this particular function.

The intention of this function is that it works on a name in a given cell and the value (an integer) that is produced is then displayed in another cell, or if using it as a formula, the cell the formula is in.

I simple wrote the work "Hello" in cell A1 the ascii values of these added ignoring any spaces give 500 which is correct.

View 3 Replies View Related

Code Only Works Every Other Time I Run It

Mar 19, 2007

I am trying to programmatically select an item from a single selection listbox (i.e., set to fmMultiSelectSingle). The following code works properly only every other time I run it; the problem is extremely repeatable.

Const storeStartCell = "B5000"
Private Sub ListBox_CounterTOs_Click()
selectedTOName = CStr(Mid(Worksheets("Sheet1"). Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 3, 3))
selectedTONumber = CInt(Mid(Worksheets("Sheet1").Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 6, 4))
ListBox_TO_Name.Value = selectedTOName
ListBox_TO_Number.Value = selectedTONumber
End Sub

The times that it works, ListBox_TO_Name.Value is set to something like "ABC" and ListBox_TO_Number.Value is set to something like "1234". When the values get set properly, the associated click subroutines (e.g., ListBox_TO_Name_Click()) get called automatically when the value is set. The times that it doesn't work, they are both set to "" and the click subroutines do not get called. I also tried

myListbox.Selected(myIndex) = True

View 4 Replies View Related

Macro No Longer Works - Getting Compile Error?

Jul 30, 2014

I created three macros to work with reporting for my company.

One sorts a field, another deletes unwanted columns, and the third double checks columns for answers--I work for a telecom polling firm.

It was working last week on my computer, and it still works on another computer at the office. However, I keep getting an error message when I try to run it.

The message is "Compile Error: Expected Function or Variable". The code is below, and bolded where it breaks down.

--selection.Autofilter

[Code] .......

What could be the rationale for the sudden breakdown? I was testing it on a file that I have tested with before without issue. I also tried a second file, and even restarted my computer. I am currently trying to write a fourth macro for counting responses and giving percentages, so while I don't need to have the perfectly cleaned data to do so it would be nice to have.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved