First I made some contents and drew a border from Home > Font > all Borders on an Excel 2010 file. So it became like below image (capture1). After that I wanted to print it so went to File > Print to see its preview. But the problem is that the lines between tue and wed and also between mon and tue are not shown neither in preview nor when printing. The height of row 7 until 17 is 24 (that is 32 pixel) but heights of the rest of the rows are normal (20 pixel).
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code: If DateBox vbNullString And DateValue(DateBox) > checkdate Then M1 = "NEOPRENE" & Chr(13) Else M1 = "" & Chr(13) End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
Userform1 on the attached file has a "Calendar" button to display a calendar that allows the user to select a date and have it placed in the Date Text Box. It simply doesn't work unless you click on the userform area where the calendar should appear - but how would the user know that?
I have a user that is experiencing a strange filtering issue within MS Excel 2000. He is working with a database of about a dozen columns and nearly two thousand five hundred rows. Two columns that are worked on for filtering proposes are the Job # and Job Name columns. Initially, the sorting works between the both – meaning if we want to find a particular job by either the name or the number – it is accomplished. However, once we cut (about a couple of dozen rows) and paste a section of rows from the bottom to the very top of all the entries – we discover that a number of jobs do not appear within the filter (once it has been applied again). Is there some type of refreshing that is needed? I have saved the file after the changes.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
I wondered if I could pick your brains and hopefully get some answers to my problem. I have recently been using the Personal.xls worksheet to make all my Macros available to all open workbooks so that I don't have to cut and paste Macros each time I wanted to use them.
Now I know you sometimes have to make certain adjustments to Macros in order to make them work globally. I wondered if I could find out how to amend the codes below to make them work properly. Thanks.
The first code Macro below deletes all worksheets in a workbook except for the currently active sheet. However it no longer works.
The On Error GoTo works if there is only one instance of the text not being found but crashes if there is a second.
I have tried adapting code found here http://www.excelforum.com/excel-prog...ght=cells.find but can't get it to work exactly as i would like. Here is an extract of my code. There are about 12 different cells.find in total.
I am writing a code in VBA using getpivotdata function. It is working fine untill the value does not exist.
Dim pt As PivotTable Sheets("Pivot2").Select Set pt = ActiveSheet.PivotTables(1) Cells(2,1).Value = pt.GetPivotData("ID", "GCB", "1", "Gender", "F", "9 box Rating_2012", NBArr(k)).Value 'the code is looping through the values in an array called NBArr
I have tried to handle this as follows:
If IsError(pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value) = True Then Cells(2,1).Value= "0" ElseIf IsError(pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value) = False Then Cells(2,1).Value = pt.GetPivotData("ID", "GCB", GCB1, "Gender", Gen1, "9 box Rating_2012", NBArr(k)).Value End If
However, even this is not working (in case when the function finds no value).
I'm looking for some direction with enhancing this code:
Code: Case "L18" Dim dfcust As String Dim wshgrp As Worksheet
With this code, wshmain.range("Y18") is populated with the value associated with the vlookup. However, problems exist when the vlookup fails. If the vlookup fails, I don't want to try to populate wshmain.range, just simply .protect and abandon.
I am working on a worksheet with quite a few advisors who will be using the sheet, because of this reason I am trying to cover my back with as much error handling with my VBA script as possible. Where I am struggling is the following line:
Code: Set cb = Workbooks.Open("wilm-dchome"UserName"DesktopCurrent projectPipeline Grouped.xlsm")
I want to have an error handler that says if this file cannot be found use the following line of code instead:
Code: Set cb = Workbooks.Open(Application.GetOpenFilename())
It may even be just a simple if statement instead but I cant seem to find the answer.
If there are records meeting the criteria are found, they are to be copied to a 2nd worksheet. Otherwise, the remainder of the code is to be executed. I am getting an error "No Cells were found" (which is true since the autofilter doesn't net any results) with the line highted in red.
Consider this snippit of ' ' courts ' Courts: Dim lcrtcopy As Long End_RowDest = 0 wshV.Activate ActiveSheet.Unprotect With Worksheets("Crts_Temp") If .FilterMode Then .ShowAllData 'disable advanced filter of data if applicable End With..........
I've got some code that reformats a file that a supplier sends us. They seem to randomly change the structure, so I'm trying to make the code a bit more robust.
Part of the code uses MATCH to look for specific column headings, so I've got some error handling around this of the format:
On Error GoTo NoIncCol Line using MATCH On Error GoTo Exiting where Exiting is my standard error handling (Close without Save) and NoIncCol is the same, but with an error message saying that the term the code was trying to MATCH can't be found. This works well for me.
In another part of the code, I need to check for another column heading, which so far has turned up in two different forms. At the moment I'm doing this as follows:
With Sheets("Sheet1").Range("1:1") Set rFound = .Find("Term1") If Not rFound Is Nothing Then a = "Term1" Else
This feels a bit clunky, and I don't really like having what is essentially error-handling in the middle of my code. But the only other way I can think of to do it is to use a GoTo, and I believe that's not really considered good practice either.
I need to:Turn off "save" and "save as" command barsPrompt user for a unique filename Save file to a specific directory on the network common to all "p:dataprc"Requery user if filename exists and if they DON'T want to overwrite.Return to worksheet (there is only one) if the user cancels from the message box.Turn commandbars back on The macro runs from an on screen button I get bug errors on NO or CANCEL when clicked in the message box. This is my current
Private Sub Workbook_Open() Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save As...").Enabled = False Application.CommandBars("Worksheet Menu Bar").Controls("File").Controls("Save").Enabled = False End Sub
Sub SaveMe() ' ' Keyboard Shortcut: Ctrl+z ' Dim BaseDir As String Dim NewName As String BaseDir = "p:dataprc" ...........
I have a UserForm (and associated code) to locate a specific entry in Column 'A' of a spreadsheet and insert a date, initials, and hyperlink to another file.
The basic code works fine, but did not account for the user entering a Job# that was not in the system, so I added an If/Else to account for this... The additional code took the If (Job# not found) route every time... Following many hours of searching this site and variations of the error handling code, I still can not get it to work.
So I'm asking for your assistance to point out why the error handling (based on other successful code found here) is not working for me.
'Insert Link Private Sub CommandButton3_Click()
If TextBox1.Value = "" Then MsgBox "Please Insert a Job#" Exit Sub ElseIf TextBox2.Value = "" Then MsgBox "Please Insert Quoters Initials" Exit Sub ElseIf TextBox3.Value = "" Then MsgBox "Please Insert Quote Date" Exit Sub
The 'Find' part of the code is working, as the correct cell is selected after running the code... but it gives the error message, instead of executing the rest of the code...
If I remove the 'On Error Resume Next', it stops on the find block, where on inspection FindR = Nothing.
So if FindR does = Nothing, how did it manage to select the cell?
I have a hyperlink to [url] that doesn't work. When I click it I get an error saying "Unable to locate the server or proxy server". But when I cut & paste the address from the hyperlink into my browser (no chance of mistyping), it works fine.
As said, the right click doesn't work anymore, last week it was working but it doesn't anymore. When I right-click wherever in the spreadsheet nothing happens but I know it's working because it works outside excel.
When I enter this formula I get a #VALUE! error. I think it's because cell AG46 has an IF formula that results in "blank" if 0. How do I fix this error so that it includes cell AG46 and if cell AG46 is blank it counts it as a zero?
=SUM(A12)-(AG46*8)(=40 is the answer I'm looking for) =SUM(40)-(0*8)
I'm trying to add a little error handling in my code. I have a macro that, when running opens a number of workbooks. At the end of the macro, my code then closes all the workbooks I've opened.
I was wanting to create an error-handling procedure that displayed a message box, and then closed any workbooks that I've opened during the course of the macro. Obviously the error could trigger at any point, so not all workbooks may have been opened at the time
My code is as follows - I've tried On Error Resume Next in the error-handling code, but Excel still returns an error that it can't find the Incidents_MTD sheet when trying to close it.
Code: On Error GoTo ReportError code code code ReportError:
what i could do to the code below so that if 2 cells are accidentally highlighted - it wont come up with a type mismatch error on the line below in red.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
With ThisWorkbook.Sheets("price").Range(ActiveCell.Address) If .Value = "" Then UserForm2.TextBox1.Value = "No Trade Selected" Else UserForm2.TextBox1.Value = Format$(WorksheetFunction.RoundUp(Val(Sheets("price").Range(Target.Address).Value), 2), "$ 0.00")
I have a excel document that is very heavy with Data Validation List Boxes. Below is just one example. Error handling is what I am trying to figure out. Description: I have 3 List Boxes. One list box data is based on data selected in the previous list box.
1st List Box uses this formula: =Series 2nd List Box uses this formula: =INDIRECT($C$2) 3rd List Box uses this formula: =INDIRECT($C$3)
It all works! HOWEVER.... If user decides to go back and change selection in first or second list box, and forgets to change the data in the second or third box, then data will be incorrect. How do I solve this problem? Is there anyway to write something so it would give them an error message and instructing them to correct the data?
The following code shows the bare bones which illustrate my problem. The routine runs whenever the user enters a string which begins "Frm1=" and contains exactly three commas.
My problem is with the MsgBox which appears if the ErrorHandler is reached. With the following code the MsgBox requires two clicks on OK to dismiss it. If I change Resume to GoTo it requires only one. Is this normal? Is there any way of dismising the MsgBox with one click? ...