Error Is Encountered During The Execution Of A Macro
Jan 18, 2007What code do I use so that if an error is encountered during the execution of a macro, the macro ends, rather than an error message popping up?
View 9 Replies
ADVERTISEMENT
Error / Code Execution Has Been Interrupted
May 20, 2013I have created two userforms which allows people to log-in to the worksheet.
The code works great on the first go, sometimes even twice, but after a while I get taken to the VBE and shown the message "Code execution has been interrupted". And highlights a certain part of my code (highlighted in red below).
I will copy all of the code relating to the userform below.
UserForm Code
Code:
Private Sub CancelButton_Click()
Unload Me
End Sub
Private Sub ClearButton_Click()
TextUsername.Value = ""
TextPassword.Value = ""
End Sub
[code].....
Runtime Error 1004 When Opening Excel From Access Upon Second Execution
Jul 16, 2014The following script runs fine the first time I click the command button on an Access form but after I close the Excel workbook and click the command button again to edit a new spreadsheet, I get the follow error message:
Run-time error '1004': Method "Columns' of object'_Global failed.
It fails here:
Code:
Columns("H:H").Select
The script is being run from Access 2007 and is opening a spreadsheet in Excel 2007 (but using xls extension)
Code:
Private Sub IdahotoExcel_Click()
Dim dlg As FileDialog
Dim idahofile As String
[Code].....
Change Manual Execution To Automatic Execution
Jun 1, 2007I have this codes which will only trigger if I manually execute it. What do I need to do to trigger it automatically whenever the worksheet change.
Below is the codes:
Sub Risk_Color()
Dim c As Range, myFontCol As Integer, myCol As Integer
For Each c In ActiveSheet.Range("f7:g20000")
myFontCol = xlAutomatic
myCol = xlNone
Select Case c.Value
Case Is = 1, 2, 3
myCol = 34
Case Is = 4, 5, 10, 20: myCol = 43
Case Is = 30, 40, 50: myCol = 6
Case Is = 70, 100, 140, 150
myCol = 5
myFontCol = 2
Asynchronous Execution Of Macro Row By Row
Mar 7, 2013I am trying to fix a problem that I am having with Bloomberg add-in for Excel. Each day I populate 31 days of historical price data for 500+ stocks.
$A$K3 = "ACE US EQUITY"
$AL$3 = "=BDH(AK3,"PX_LAST",$D$1,$C$1,"DTS=h","dir=h")"
$C$1 = "=WORKDAY(TODAY(),0)"
$D$1 = "=BAddPeriods(C1,"NumberOfPeriods=-31","Per=wd","CDR=#A")"
What is supposed to happen is that in $AL$3:$BQ$3 there will be prices for 31 days.
I leave the workbook open as the Bloomberg DDE session remains open for 3 days even if the Bloomberg executable is not running.
Sometimes there is no problem and when I come into work the following day, the data is shifted forward by one day. Other times, much of the data is missing and I am forced to select and refresh each $AL$_ field. The problem with this is that for some reason the refresh is happening synchronously and I think this is causing havoc on the DDE connection and/or Excel. Resulting in slow/no updates. Also, if I refresh the worksheet some formulas will be overwritten with static data!
What I would like to do is create a macro that will:
1) clear all data in $AL$_:$BQ_$ & $BS$_:$CX_$
2) set the value of $AL$_ = "=BDH(AK$_,"PX_LAST",$D$1,$C$1,"DTS=h","dir=h")"
3) wait until the data is populated into $AL$_:$BQ$_ before going to $AL$(+1):$BQ$(+1); if $AM$_ has a value then most likely the data has populated in that row.
4) then when $AL$_:$BQ$_ is finished, do the same for $BS$_:$CX$_
I have been waiting for Bloomberg support to fulfill this request for over one month now with no results.
I have a very minute amount of code below:
PHP Code:
Sub PopulateData() PopulateData Macro Range("AL2:BQ2").Select
Selection.ClearContentsRange("AL2").SelectActiveCell.FormulaR1C1 = _ "=BDH(RC[-1],
""PX_LAST"",R1C4,R1C3,""DTS=h"",""dir=h"")"Range("AL2").SelectEnd Sub
Macro Execution Stops
Mar 12, 2009I have a problem with the following code
Dim strProcLine As String
With ActiveWorkbook.VBProject.VBComponents(ActiveChart.CodeName).CodeModule
' MsgBox ok
' adaugat procedura goala
.CreateEventProc "Calculate", "Chart"
'MsgBox ok
strProcLine = "Format_Chart"
' MsgBox ok
.InsertLines .ProcBodyLine("Chart_Calculate", 0) + 1, strProcLine
' MsgBox ok
End With
' MsgBox ok
This is part of a larger macro, wich makes 2 pivottables and for each PT a chart, and for each chart i create an even procedure (Chart_Activate) wich calls a procedure to format the chart. Tha macro is alocated to the click even on a button in the sheet where i get the information from.
If i run the macro(click the button) with Microsoft Visual Basic Editor opened all goes ok. But if i close Microsoft Visual Basic Editor and then run the macro it stops right before .CreateEventProc "Calculate", "Chart" of the first chart , and i can't understand why. No error mesages delivered, nothing.
Macro Hangs After Execution
Jul 11, 2006I have written a macro .When i execute the macro the result is displayed but my excel file hangs after that.
View 3 Replies View RelatedPause Macro Execution Without Using Stop?
Jul 3, 2014I have macros that often pause for the user to take some action -- for instance, to confirm that the correct cells are selected, or to delete something. Usually I use the "Stop" command, which opens the VBA editor; when I finish doing the manual action, I just resume the macro.
When writing macros for actual users, I'd like to do the same thing without their having to deal with the VBA window. Is there a way to pause and resume action and remain in the Excel window?
Entry Based Execution Of Macro
Dec 19, 2008I have to make eighty to ninety entries daily in Column B. Then transfer these entries to another column N,(by copy/paste) after that a maco "text to column" is executed. Now I have linked Column B to N like =B2, =B3, etc. etc. thus instead of copy/paste, the data when entered in Column B, is automatically going to Column N. I wish that the macro (text to entry) may be executed by each entry made in Column B. Is it possible with a macro?
View 7 Replies View RelatedAssigning Shortcut Key For Macro Execution
Dec 18, 2012I have a macro where I am assigning a variable and the value of the variable is a path where the data is stored. i am trying to assign a shortcut key for macro, i tried to run the macro by going to the vba mode and then click on the F5 function key and the macro run absolutely fine. but when i use the shortcut key the file just opens and just exits the macro.
Code:
Option ExplicitDim a, b, c As Long
Dim myFolder As String
Dim con As New ADODB.Connection
Dim rs As New ADODB.Recordset
Dim sql As Variant
Sub Macro1()
Application.DisplayAlerts = False
[Code] ....
Stop Macro Execution From UserForm
Jun 7, 2013On a worksheet I have a command button that displays a ConfigureCatalog form.
Code:
Public StopRequested as Boolean
'Worksheet Command Button will display the Configure Catalog Form
Private Sub CmdConfigure_Click()
CatalogConfigForm.Show vbModeless
End Sub
The ConfigureCatalog userform has two Command Buttons: cmdRebuildCatalog, and cmdStop. RebuildDSWCatalog is a macro that reads and analyzes just over 35,000 records and updates other worksheets. As it runs, it repaints the CatalogConfigForm with a progress message every 100 records. It can run for about 3 minutes. I want to provide a "STOP" button that will allow the user to interrupt the RebuildDSWCatalog macro and return control to the user.
Code:
Private Sub cmdRebuildCatalog_Click()
StopRequested = False
Call RebuildDSWCatalog
End Sub
Private Sub cmdStop_Click()
StopRequested = True
End Sub
While processing the 35,000 records, I want the RebuildDSWCatalog macro to check whether StopRequested has been set to TRUE prior to processing the record. If StopRequested = TRUE, I want to drop out of the macro.
Code:
Public Sub RebuildDSWCatalog()
StopRequested = FALSE
For DSWRecord = DSWStart To DSWCount
If StopRequested = True Then
[Code] ....
Problem is that once the RebuildDSWCatalog macro starts running, the STOP command button never seems to get the focus back. All other input is inhibited until the macro ends.
It just ignores that I'm hitting that STOP button. In fact, the button doesn't visibly respond at all until RebuildDSWCatalog finishes processing all 35,000 records.
Code Execution Has Been Interrupted On Running Macro
Jun 9, 2009Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
Eliminate Display Alerts During Macro Execution
Jul 15, 2009I just finished a great macro and right at the end of deleting a sheet, I got a message box saying
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete"
How can I eliminate this from popping up in the middle of code?
Excel Changing Format From General To Text During Macro Execution?
Jul 25, 2013I have a procedure that allows me to view and make changes to data in a table. I list the current values for the item in one column and use simple formula to copy that value to another column where if there are changes that need to be made, the formula is simply overwritten. The Macro is then selected using a command button and the formulas are all overwritten using copy/paste values to keep from writing out the formula to the data table. These values are then all written back to the data table, current values are overwritten with whatever is in the update column, new data or old data.
I have one cell out of 48 that has decided to march to the tune of a different drummer. The format changes from General to Text and the formula written from the macro is what shows up in the cell instead of the value of the formula. Never a big disciplinarian, I have to wonder if I have been too lenient on the cell and this defiance is the price I have to pay.
The sheet is protected only allowing entry into the cells available for update.
Here is the bit of code that affects this cell (starting from a format of General:
Code:
Sheets("Product Data").Cells(ItemRow, 3).Value = Sheets("Update").Cells(6, 8)
Sheets("Update").Cells(6, 8).FormulaR1C1 = "=(RC[-6])"
I just don't see anything that would change the format, and these are the only two lines that even reference cells(6,8).
I tried to set the format for the cell from within the Macro, but with the sheet being protected, it just dumps me out to my error message.
Creating A Timer To Measure Macro Code Execution Times
Sep 7, 2006I am looking for a way to measure how long it takes to complete a sub routine in VBA. I have code which posts data to matlab and then calls it back. What I need to know is how long does it take to complete each subroutine.
create a code which will measure this? I need to measure the time taken in 100ths of a second.
Is there any simple code to complete this? I am pasting a sample of my code which is using Matlab as a COM server.
Dim Matlab As Object
Dim MReal(10, 0) As Double
Dim i As Integer
Dim j As Integer
Dim MImag() As Double
Dim value As Double
Dim RealValue As Double
I am sure I woould need to declare the timer but I do not know where and I am not sure of the syntax.
Show Progress Indicator If Macro Execution Take Some Considerable Time
Jun 7, 2007is it possible to show progress indicator if macro execution take some considerable time say more than 10 seconds?
View 2 Replies View RelatedSumming Appropriate Cells If Last Entry Of A Unique Id Is Encountered?
Jul 1, 2014ID = 1: The B Number is the same for entries of ID =1. Thus where ID = 1 and Last is indicated, Cost = 10.
ID = 2: The B Number changes four times. In cell G20 (Last of all ID =2) Cost = 20+30+40+30 = 120. You are basically summing at each instance the B Number changes.
ID = 3: Cell G24 = 100 +30 (two instances of B Number changing)
ID = 4: B Number is always the same. Cost = 50
ID = 5: B number changes 3 times, Cost = 50+120+140 = 310
In essence, the idea is that if the ID matches for all rows of particular client, the total cost = individual cost. However, if the ID changes multiple times for a single client, the total cost becomes the sum of changed costs, but not the entire column, just summing at each instance it changes. And this summed cost must be entered whenever we see the last instance of a unique ID (This is indicated using Column F).
The problem that I'm running into is that currently I am doing this manually with my actual data set (has nearly 200,000 rows). What excel function or VBA code could I write to automate this entire process?
Opening File Causes: Excel Has Encountered A Problem And Needs To Close
May 23, 2008I am trying to open an Excel file that was emailed to me in zipped file that requires macros. When it asks me if I want to enable macros it gives me an error and will not open. Is there a setting I need to change?
View 5 Replies View RelatedHow To Populate Blank Cells With Sequence Until Non Blank Cell Is Encountered
Mar 22, 2014I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Vba Macro Error: Compile Error Named Argument Not Found
Apr 26, 2006I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
Hide Message Box After Execution
Nov 14, 2012I have an inputbox that asks a question. If the user enters an incorrect response, a messagebox appears telling them to enter the correct word and returns to the inputbox. The code works fine, however the messagebox doesn't disappear after they click OK. Is there a way hide or get rid of the messagebox once they click OK or Cancel? My code is below:
inputboxVorD:
VorD = Application.InputBox("Is this for Voice or Data?", "Voice or Data", Type:=2)
Application.DisplayAlerts = False
Select Case VorD
[Code]....
Slow Code Execution
May 9, 2007I have the following piece of
Sub Summarise_Variations()
Dim myRange As Range
Dim Write_Cell As Long
With Application
.Calculation = xlCalculationManual
.StatusBar = "Please wait - Summarising variations..."
End With
It happily goes through a list and sums multiple records. It might not be the most efficient or best way to do it but it works and when I run it on a couple of stand alone sheets it takes a couple of seconds to process if that.
Unfortunately when I run it as part of the overall application that I've developed it takes ages to run, i.e. more like ten minutes.
The spreadsheet has a few graphs and about 250 sumproduct and array formula live in it but all other formula on other sheets are created and then paste valued as part of other VBA routines. As you can see I've also turned calculation off as the procedure runs so don't understand why it is suddenly taking so long.
Pause Within A Loop Execution
Jun 10, 2007I want to establish a loop in VB and within the loop I would like to pause execution of the loop and wait for input from a cell then resume execution of the loop once input has been entered.
View 9 Replies View RelatedForm Freezes At Execution
Oct 8, 2007I have a multipage form that I'm using to create a wizard that accepts data from the active workbook via a refedit box, however, when I try to execute the entire form freezes at runtime. The editor will bring up the workbook but the entire workbook freezes.
I cannot click any of the buttons on the form, exit the form, input the range into the refedit box, or even click on any cells in the worksheet. Everything was working perfectly fine until I started adding command buttons to other pages of the multipage form, but no code has been added.
I don't even have code to link the pages together, all I did was add command buttons and change the names on them. I'm having a hard time believing this is what's causing excel to freeze up, but I haven't done anything else. I've checked my loops and they are fine.
I've also gone back to another copy and deleted everything on the other pages and left only page 1, but this is still failing.
Slow Execution Before Interruption
Jun 21, 2006I have a macro that opens various files (via a loop) and then goes to each worksheet (via another loop) and looks through each row of data (a third loop).
Each worksheet can have over a thousand rows of data. Once I hit the button for the macro to run, it runs without any error messages, but it seems to take forever.
When I hit escape twice to interrupt the macro and then press the 'play' button, it zips through and finished running the macro really quickly. The interruption point is generally somewhere within the third loop.
It's almost as though it falls asleep and I have to wake it up.
Time Limit On Code Execution
Jul 8, 2009I have a function which will allow me to search for combination of numbers which will sum to zero. However, because the range could be as long as 300 rows or even the possibility of not finding the combination that will sum to zero, the macro will take ages to complete or even causes the whole excel to hang. So What i want is to instruct macro to stop doing the search if it cannot find the results after say 20 minutes of searching.
Is that possible?
VB Code Execution On Worksheet Change
Sep 16, 2009What is the key word sequence to cause VB code to execute on a worksheet change?
View 9 Replies View RelatedCode Execution Has Been Interrupted At Random
Jan 5, 2004There is definite problem, as the "Code execution has been interrupted" error message appears seemingly at random (although if the workbook doesnt change it is the same points), and for no reason.
If I click the continue button the macro runs exactly as planned, but still there seems to be no rhyme or reason as to why this happens!
It even invokes on the workboon_open function.
Web Queries Don't Refresh During Code Execution
Sep 9, 2006I am writing a routine to retrieve multiple stock quotes by looping through a bunch of sheets and refreshing a bunch of querytables that access the web. My data source (Livecharts) is often clogged up and queries will fail or get lost in space so after initiating the queries I wait for a while using a waitable and then check to see if each query has completed or is still refreshing. If they are still refreshing I cancel them and refresh again. Or at least that was the plan. What I have discovered is that as long as the vba code is running the results from the queries do not come back into excel. As soon as the code is exited or I go into break mode in the debugger the queries complete.
Is there some way to get the queries to refresh during code execution? Here is a code snippet that shows what I am trying. I have defined a Class Module defining an "EventfulQTable" and it's associated methods and properties so I can have a QueryTable with events. The sub Wait uses the windows API SetWaiTable command to pause for a specified period of time. It includes a DoEvents command which I thought would allow the returning queries back into Excel but no such luck.
Sub Refresh_Queries()
Dim SheetNum As Integer, ListSheet As Integer
Dim eqtQT As New EventfulQTable
Dim QueriesDone As Boolean
SheetNum = 1
ListSheet = 12
QueriesDone = False
On Error Goto QueryError
Compile Error Syntax Error In Macro
May 17, 2014VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..