I im getting and else with out if complile error on the below code...
Sub test()
Dim a, rng As Range
Set rng = Range("a1:d100")
For Each a In rng
If a.Value = "" Then a.ActiveCell.Select
With Selection
.ColorIndex = 6
.Pattern = xl.Solid
End With
What does this code mean? I can't come up with any listing that includes it.
View 5 Replies View RelatedI am having trouble Stepping Into my VBA Code. The Macro itself is working fine (usually), but whenever I try to run through it step-by-step it creates an error near the beginning of my code. Here's the first few lines of my code.
Code:
Sub JLJ_DataEX()
'
' JLJ_DataEX Macro
' Extracts pertinent data from Joe Lamb Jr. Excel pasted property webpages
'
' Keyboard Shortcut: Ctrl+j
'Disable Alerts & Offscreening
[Code] .........
Within the workbook i have a variable declared as
Public ResultsSheet As String
in the workbookopen event I assign a value
ResultsSheet = "Search Results"
and in the Private Sub CommandButton1_Click()
I attempt to make the hidden sheet visible
Sheets(ResultsSheet).Visible = True
Now this works for eveyone except one person, when it fails with subscript out of range error 9.
If i email the workbook back to myself it all works fine
am using the code posted below and i get an Error code 424.
Dim i As Long
Dim Ans As Variant
Application. ScreenUpdating = False
If Not Intersect(Target, Range("E4:E7")) Is Nothing Then
If (Cells(i, "e").Value) > "0" Then
MsgBox "Calls In Queue " & Ans = ActiveCell.Offset(0, -1).Value
End If
End If
Application.ScreenUpdating = True
End Sub
I have made a simple spreadsheet with different values going down one column. I would like to randomly select any value in that column and have that value show up in another cell on the same spreadsheet. How do I do this?
View 2 Replies View RelatedIn one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.
I have the following code that opens a series of workbooks on a given day, However, if one of the workbooks has been renamed or is missing the code gives a "400" error and stops, is there a way of having the code retry the next workbook if it comes to an error?
View 2 Replies View RelatedI was modifying some code in a script and now every piece of code that was like this:
View 4 Replies View RelatedI would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
I worked a while on getting a macro to do what I needed in VBA. I am sure it is not the most efficient way of doing it, but its all I know. The only problem I am now encountering is getting an "Overflow" error and I can not fix it.
Sub CodeRateChange()
'Keyboard Shortcut: Ctrl+t
'Vlookup of PC to get PG
Sheets("CODE").Select
For I = 1 To 1000
If Left(Cells(I, 1), 1) = "P" Then
Cells(I, 2) = Application.WorksheetFunction.VLookup(Cells(I, 1), Range("Hierarchy"), 2, False)
End If
Next I
'Calculate Base Sales Dollars
Sheets("CODE").Select
For I = 1 To 1000
If Left(Cells(I, 1), 1) = "P" Then
Cells(I, 39) = (Cells(I, 3) * Cells(I, 15))
Cells(I, 40) = (Cells(I, 4) * Cells(I, 16))....................
I have this code that only returns a #NAME? error. I'd love it if someone could take a look and let me know what you think might be going on. If it factors into it, D1:D4 each contain one of the following: USD, AUD, GBP, MX and E1:E4 contain the corresponding exchange rate. Also, J7:AJ41 contain a function that returns a number. Let me know if you need more information. I just can't figure why this is not working.
Sub newtabs()
Dim x As Range
Dim Curr As String
Dim Rate As Double
For Each x In Sheets("Cash Flow Detail - WkCount").Range("D1:D4")
Curr = x.Value
Rate = x.Offset(0, 1).Value
Sheets("Cash Flow Detail - WkCount").Select
Sheets("Cash Flow Detail - WkCount").Copy After:=Sheets(2)
Sheets("Cash Flow Detail - WkCount (2)").Name = Curr
Cells(7, 10).Select
ActiveCell.FormulaR1C1 = "=IF(activecell.offset(RC7)=" & Curr & ",('Cash Flow Detail - WkCount'!RC*" & Rate & "),0)"
Selection.Copy
ActiveCell.Range("a1:aa35").Select
ActiveSheet.Paste
Next
End Sub
I've been having a problem that I'm afraid will be hard to explain.
I have a project with multiple userforms. When one particular form is loaded, after executing all the code in UserForm_Activate(), it acts as if I had set a break point on the line where I opened that form, except instead of the red circle breakpoint icon, its a yellow arrow and the highlighted text is highlighted in yellow. Theres no error message or anything, and when I hit f5 again, it continues with no problem until the form is reloaded.
So for example, on form1, I have:
Me.Hide
Form2.Show .............
I need to change the colour of cells depending on contents. The following code works perfectly until I try to insert or delete a row in the worksheet. Then I get Run-time error 13, Type mismatch.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Set I = Intersect(Target, Range("E5:E100"))
If Not I Is Nothing Then
[Code]....
I am converting Excel Templates which were developed in office 97 to Excel 2003.The templates are running fine in office 97 ,but when I run the same template in off 2003 I get the error "Run time Error Code 1004 : Application or Object Defined " and when I tried to debug the cursor is pointing to a cell which contains a formula which add multiple cell values.Can any one throw some light on this why the template which works fine on office 97 is not working in office 2003?
View 11 Replies View RelatedHad a bit of code I was working on for a guy on here, and came across a problem while putting the finishing touches on it. It's since been solved by someone else, but for future reference...
View 13 Replies View RelatedOver the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.
View 10 Replies View RelatedI have some code I have created to set page breaks. Depending on a previous option, my report will be either 3,6,9,12, or 15 pages. The info on each page varies in length, but I use table headers to separate the data onto different pages so none of the tables are split into more than one page.
My problem when the code gets to a certain line, it gives me error 1004. I will hit "Debug", then I hit continue and the code finishes. I don't understand why I am getting an error on this line, and why I don't have to fix anything to get it to finish running.
Here is the
I am writing some code where one column is selected and a value is searched for in that column. If found the code continues on its way manipulating the data. The issue is that the value being searched for will not always be there which results in an error. Is there a way that I can just tell the macro to continue running if the value is not found.
Columns("V:V").Select
Selection.Find(What:="1", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Rows(ActiveCell.Row).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Delete Shift:=xlUp
On a second question is there some code I could write that would select all the rows with the number 1 in column V and delete them rather than doing the way I am here?
I am trying to run code to update Excel Worksheet from the value in a cell.
The code is -
Sub upDateSheetNames()
'Standard Module code, like: Module1.
Dim ws As Object
For Each ws In Worksheets
[Code] ......
Although it does actually work i.e. populates the worksheets with the correct values when I run the code a dialogue box appears indicating - "Run-Time Error '1004' Application Defined or Object Defined Error"
When i select the 'Debug' option the "ws.Name = ws.Range("Q1").Value" line is highlighted.
I have created two userforms which allows people to log-in to the worksheet.
The code works great on the first go, sometimes even twice, but after a while I get taken to the VBE and shown the message "Code execution has been interrupted". And highlights a certain part of my code (highlighted in red below).
I will copy all of the code relating to the userform below.
UserForm Code
Code:
Private Sub CancelButton_Click()
Unload Me
End Sub
Private Sub ClearButton_Click()
TextUsername.Value = ""
TextPassword.Value = ""
End Sub
[code].....
I wrote the below code, the error seems to be occurring on the ActiveSheet.Name line. At this line the debugger is giving the runtime error.
Sub ListWorkSheetNames()
Dim Sheetnames
Sheetnames = Sheets.Count
Sheets.Add
ActiveSheet.Name = 'SheetList'
Sheets(SheetList).Move after:=Sheets(Sheetnames + 1)
For i = 1 To Sheetnames
Range(A & i) = Sheets(i).Name
Next i
End Sub
Why does the "else" section of this code cause an error when part of a sheet code but runs fine in a macro?
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("B3")) Is Nothing Then
Exit Sub
Else
Application.ScreenUpdating = False
Sheets("Current").Select
Cells.Select
Selection.ClearContents
Target2 = Range("Analysis!A1")
Sheets(Target2).Select
Cells.Select
Selection.Copy
Sheets("Current").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.ScreenUpdating = True
End If
End Sub
The following codes work well but when I have changed the following condtion ,
If cel = Tgt.Range("A2") Then
to
If cel "" Then
I got worng result, can anybody help me to correct it?
Option Explicit
Sub test()
Dim sh As Worksheet, Tgt As Worksheet, i As Long, j As Long
Dim d, a
Dim c As Range, Rng As Range, cel As Range
Set Tgt = Sheets("Report")
Set d = CreateObject("Scripting.Dictionary")
j = 0
On Error Resume Next ...............
Sub paste()
' paste Macro
' Macro recorded 2/20/2009 by lawryad
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.paste
ActiveSheet.paste
Application.CutCopyMode = False
ActiveSheet.Range("p1").Copy
ActiveSheet.Range("a1").Select
End Sub
Now everything works good with this code unless there is nothing copied to paste. In that case it will go to a "run-time error'1004' " I would like instead for a msg box to appear saying "You must copy required data first"
Before doing some modifications in a data sheet, I first check with the below code whether a certain list is complete or not using the VLOOKUP function. If I encounter a missing value in the list, a userform appears asking to fill out 3 data fields, which are then added to the original list to complete it. All of this works fine if only one line is missing; if there are two (or more) lines missing, all goes well untill the VLOOKUP function errors out on the second line missing.
I can't find out why everythign goes welll with the first missing line, but not with the second missing line.
Sub proCheckVesselCodes()
Sheets("Sheet4").Select
Range("K1").Value = "Check"
Set varRange1 = Range("A1")
fctCountNrRows
varRow1 = varRow
varRow2 = 2
jump:
On Error Goto addvessel...............
I want to place a message in cell
Sub OutOfStockDate()
templateSheet.Range("B15").value = dataSheet.Range("G5").value
If dataSheet.Range("G5").value = "" Then
templateSheet.Range("B15").value = "There is no Out of Stock Date"
End If
End Sub
However when I run this code I get the infamous 1004 error.
I am trying to hide four columns on my worksheet, but for some strange reason I am getting the following message:
"Run Time Error 1004
Unable to Set The Hidden Property of the Range Class"
I have no merged cells or objects in those columns. Has anyone else suffered this problem?
I have a macro that searches through a certain location for Excel files. The program and files were made in Office 2003. When another user runs the macro in Office 2007, the files are not recognized or the macro does not search, I'm not sure. Either way, the files are never located in their folder location. Any thoughts or ways around this?? The top part of the code is posted below,
Do
With Application.FileSearch
.NewSearch
'Change path to suit
.LookIn = "C:Documents"
.FileType = msoFileTypeExcelWorkbooks
'.Filename = " Book*.xls"
If .Execute > 0 Then 'Workbooks in folder
For lCount = 1 To .FoundFiles.Count ' Loop through all.
'Open Workbook x and Set a Workbook variable to it
Set wbResults = Workbooks.Open(Filename:=.FoundFiles(lCount), UpdateLinks:=0)
I'm new to VBA but have had it working well for me, until the other night when a user complained that when he ran a macro, it came up with the error "Paste method of Worksheet class failed". I should note that this has worked time and time again, so I'm lost. I also found tonnes of answers with a Google search but they were all relative to that persons code.
So this is the code I am using to paste from the clipboard into another tabbed worksheet :
[Code] .....
