Over the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.
View 10 Replies
This code works fine when I run it in Excel.
Code:
Sub RemoveCodeAndSave()
'Remove all code from ThisWorkbook code module
ThisWorkbook.VBProject.VBComponents("ThisWorkbook").CodeModule.DeleteLines 1, _
[Code]....
I get the error "Run-time error 440: The specified dimension is not valid for the current chart type" why I am getting this. The macro does everything I want it to, except for throwing the error at the end.
Over the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.
View 12 Replies View RelatedRuntime error 1004 while loading Add-In. I have a workopen event as follows:
View 4 Replies View RelatedI'm trying to automate Disk Cleanup, Defrag and Backup via VBA but can't seem to get defrag to work...
Sub defrag_hard_drive()
Dim returnvalue
'exe file shell
[Code]....
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
i have a macro he was working good but now i got a box labeled "Microsoft Visual Basic" saying "Error in loading DLL" and the macro won't open. I can't figure out what I'm missing.
View 9 Replies View RelatedIntermittent run-time error '75'
Could not find the specified object.
Debug shows VBA Code that simply loads a form called controls
Sub loadcontrols()
Load Controls
Controls.Show
End Sub
Generally works upon restart. Can load and unload the form numerous times. Seems loading the form after a few minutes results in the form failing to load generating the error. Found no consistent cause thus far.
Results in a hard crash: Restart Excel as only option.
The Form Code for Controls loads a modeless transaprent form. Has been working for months. Don't know if this error is new or has been there all along.
Option Explicit
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetWindowLong Lib "user32" Alias "GetWindowLongA" (ByVal hWnd As Long, ByVal nIndex As Long) As Long
Private Declare Function SetWindowLong Lib "user32" Alias "SetWindowLongA" (ByVal hWnd As Long, ByVal nIndex As Long, ByVal dwNewLong As Long) As Long
Private Declare Function DrawMenuBar Lib "user32" (ByVal hWnd As Long) As Long
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hWnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Private Declare Function ReleaseCapture Lib "user32" () As Long
Private Const GWL_STYLE As Long = (-16)
Private wHandle As Long 'For moving the form
Private m_objCFormSkin As CFormSkin 'For transparancy
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
I had been working on some code for about 30 minutes and all of a sudden I am getting an "Error in Loading DLL" message. I can't figure out what I was doing that would have made this error occur. It appears that other workbooks with macros are working correctly. In advice as to what I may have done incorrectly to cause this error and how I might fix it?
View 6 Replies View RelatedI'm trying to loop thru the various sheets in a workbook but am having trouble accessing the current sheet name. what I have below does not work and I am stuck with how to access the current sheet name, interrogate it for what it is named, and skip processing if it is a particular name.
Private Sub dispnames()
Dim b As Integer
Dim r As Integer
Dim iSheetCount As Integer
Dim iSheet As Integer
Dim sh As Worksheet
Dim wsht As Object
iSheetCount = ActiveWorkbook.Worksheets.Count
For iSheet = 1 To iSheetCount
wsht = sh.Name
If wsht = "summary" Then
Goto skipit
End If
Worksheets(iSheet).Activate
r = Range("A" & Rows.Count).End(xlUp).Row
Range("A2:" & "A" & r).Select
Selection.Copy
Sheets("summary").Select
b = Range("Z" & Rows.Count).End(xlUp).Row + 1
Range("Z" & b).Select
ActiveSheet.Paste
skipit:
Next iSheet
I am pulling external data from an Access 2007 database query that uses the nz function. While linking to the query, I get an "Undefined Function nz" error. The query works perfect when run in Access.
View 1 Replies View RelatedI'm scraping a website for some data using the following program. The program was working as expected until I decided to add a save file element that was a copy paste of some code a friend gave me (attached below). Funny thing is the save file functionality works but now I can't get IE to load the webpage - I get a 438 Error. I'm thinking there's a problem with something in the references menu.
Code:
Sub GET_PVI()
Dim Days_in_Month(1 To 12) As Integer
Dim Name As String
[Code]....
The following script runs fine the first time I click the command button on an Access form but after I close the Excel workbook and click the command button again to edit a new spreadsheet, I get the follow error message:
Run-time error '1004': Method "Columns' of object'_Global failed.
It fails here:
Code:
Columns("H:H").Select
The script is being run from Access 2007 and is opening a spreadsheet in Excel 2007 (but using xls extension)
Code:
Private Sub IdahotoExcel_Click()
Dim dlg As FileDialog
Dim idahofile As String
[Code].....
i am running a macro thru vba (beiing called from a ms access module) and am getting a RuntTimeError 1004.
the code opens a workbook...then open a second workbook (which houses the macro) then activates the desired worksheet and call the Maco via the run command but errors out.
if i open the workbook and set focus on the desired sheet ....tool>macro>desired macro name it runs fine.
the line of code in the macro is: "ActiveCell.Offset(1, 0).Activate"
Is there a way to prevent access to the code of a macro? I am interested in sending out some macro's, but would prefer that the user only be able to run them, and not be able to access the code via the edit button. Curiously, there have been occasion's where I wanted to edit my own work, but the edit button did not function, so I had to exit and start over to proceed. From this I'm guessing there must be a way.
View 2 Replies View RelatedIs it possible to use vba code to run a report in Access and then save it as a PDF?
I have a subroutine (well, a combination of subroutines) that copies some data from a spreadsheet into Access.
I then want to be able to run a report based on that data, save it as a PDF and email it out: all automatically.
I don't want the user to have to actually open Access and run the reports, because it's much slower! For some reason Excel can open access, write to tables and close it within a matter of seconds: opening the program manually, editing the table and closing it can take minutes.
The current code is not working.
View 1 Replies View RelatedI am trying to add a button on my spreadsheet that will give the person Access to one cell only. The cell in its normal state is Locked. The cell is ALWAYS in Column F of a sheet titled Master. The button is located on the sheet titled Master.
The real problem may arise in that once the person has access to the cell and they make their changes I need that cell to return to being Locked and the sheet once again Protected with Filtering.
Does this make sense to anyone? Can it be done and if so any suggestions?
I've trailed through the search engine on here and I can't find an answer to this:
Can you access lookup tables in Excel from VBA code? I assume you can, but can't seem to find anything on this
Having trouble opening an access file using this code. Using the following code
View 3 Replies View RelatedI am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.
Here is my situation: the file that houses the macro has the workbook hidden and causes in error.
if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.
if i hide the workbook the vba coding can't find the macro...run time error 1004
once again, i currently have an excel file that houses macro whose workbook is hidden.
does anyone know how this can be accomplished?
here is the ....
I looking for a solution to change a Access Query Criteria using a VB code in Excel, without opening the Access DB and changing the criteria manualy?
My normal Job is it:
1) I Work all the time in Excel
2) At the end of the work in Excel, I need to open Access
3) Open a query (Called "MyQuery")
4) Change one parameter the Date: Between 01/10/2008 and 30/10/2008 (This for each month)
5) Run the query
I looking to get rid of points 2) to 5) by replacing with a Command button on an Excel sheet
Sub Change_Criteria_And_Run_Query()
Dim mydbase As Object
Set mydbase = CreateObject("Access.Application")
mydbase.OpenCurrentDatabase ("C:My doucmentsDB1.mdb")
mybase."MyQuery"."Date Criteria" = Between (Worksheet("Sheet1").Range("A1").value) and (Worksheet("Sheet1").Range("A2").value)
>>>>>The above line of code I have problems to get right!
mydbase.DoCmd.RunMacro "MyQuery"
End Sub
I have two procedures in two different access forms. First procedure executes fine. It ends up with creating a Table1 by importing the data successfully from the Excel file. But after that later when I call procedure 2, it throws the below error when it is trying to import the data in to Table2. I think the Excel "Test.xls" did not save properly and close in the Procedure 1. I could see some Excel thread running in the Task Manager. How can I handle this. Please advice. Your expertise help will be truly appreciated. I am absolutely new to this VB-Access code world.
Error: "'MySheet2$'is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long." ....
The database I'm working with uses a lot of back end code to take Access tables and format and output them to Excel Files. After the table (FinalLoadCharttoExcel) has been created through the append query AppndFinalLCToExcel, I need to sort the table by the following fields: "Terminal Number," "State," "3 Digit Zip" and "Begin Zip" all in ascending order. I need to do this within the VB code. I wish I knew a way to get a screenshot of the table, but this is what it looks like unsorted:
Terminal Number State 3 Digit Zip Begin Zip
371 MA 011 78
371 MA 011 00
303 LA 701 06
303 FL 328 31
381 MO 716 04
After all the programs run, I need the table to look like
Terminal Number State 3 Digit Zip Begin Zip
303 FL 328 31
303 LA 701 04
371 MA 011 00
371 MA 011 78
381 MO 716 04
I have recently used a before_close event on this workbook to save a backup of the open file to another location on my system. This works fine but I was wondering if there was some more code I could add to only execute this event on a write access basis.
The file I use can be viewed by anyone on the network as read-only and only certain users with a password can edit/update with a write access password.
The backup event is use executes every time the document is closed be it read-only or write-access.
Ideally I would like to add some code to only execute this backup if the file is opened on a write-access basis.
I would like to develop a user-friendly Excel 2010 spreadsheet that would allow the user to enter from 1 to 10 (i just picked this number at random just to have an upper limit) employee numbers in cells A1-A10 and "click" on the VBA Code button that would invoke an Access Query and in the process return all the applicable data gathered from the query back into the Excel Spreadsheet. Believe it or not, I can do all this mentioned so far. BUT what i cant do is my second option for the user which is allow them to pull ALL of the employees back into the spreadsheet using the same query.
In summary, using Excel as a frontend dashboard, I know how to get a specific number of employees' information from a query and I know how to get all employees' information from a query but I dont know how to get either/or. In other words, I could do this with two queries and two "VBA-Code" buttons but I would like to do it with one query and one button.
Using a pivot table, I'm linking to an external data source in ACCESS. I use the pivot table wizard, select the database (spend2008.mdb), and then ONE table that is not in a relationship/linked etc, its just a plain table, and then I get the error
"The Microsoft Office ACCESS database engine cannot find the input table or query "mdb.summary". Make sure it exists and that its name is spelled correctly".
This is new spreadsheet, so new join to the data. I'm selecting the table from the Query Wizard, so not possibility of a spelling mistake. I've been all through the database to make sure I haven't set a link or relationship. There are a total of 4 tables in in the DB that are related, but I've deleted the relationships
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
