Below there is code for some inputboxs as well as some if statements on their results. The Exit sub situations work fine but If i do actually put a valid answer in the secod input box then it results in a mismatch error on the OR statement... why the first inputbox works fine but the second one gives me a type mismatch error when a valid input is given? Also if there's a more efficient way to do this please feel free to correct the code.
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code: If DateBox vbNullString And DateValue(DateBox) > checkdate Then M1 = "NEOPRENE" & Chr(13) Else M1 = "" & Chr(13) End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
I'm trying to write a pretty simple macro which invokes a built-in DDE function to retrieve some data, then when the data is retrieved, just show a msgbox. When the data is finished being retrieved, cell(20,11) in the sheet "Historical Data" will automatically have "FINISHED" placed in it. So while the retrieval is taking place, I'm simply looping and checking the contents of this cell waiting for it to read "FINISHED". My problem is the 'Do While Sheets("Historical Data").Cells(20, 11) <> "FINISHED"' line generates a "Type Mismatch Runtime Error 13", which I can't for the life of me understand why.
I have a piece of VBA code that acts weird. For brevity I am doing a function call like this:
val=MyFunc( [D1] )
and
Function MyFunc(mean As Double)
D1 is a named range which is a single cell. It contains a double. The problem occurs when the value is zero, I get a type mismatch on the function call. If it is non-zero all is well.
What would cause this? I could see if zero was invalid inside MyFunc() that some calculation might blow, but it nevers gets into the function. Looks like the compiler is stopping it.
I have attached a sample file for you to easy reference. So when the code run until the loop function, it will prompt an error message.
The idea is to open the selected file and the copy the data from the selected to this master file by searching the column A. Column A has the identical text in all the files that are to be copied from.
I am trying to only have the option 1, 2, or 3 be entered. I have that part down, but if someone clicks cancel or just closes the input box i get the type mismatch I believe because no integer was found....is there a way around this?
Dim intResponse As Integer intResponse = InputBox("Choose One" & Chr(10) & Chr(10) & "1 - Lease Lock" & Chr(10) & "2 - Upgrade" & Chr(10) & "3 - Lease Lock & Upgrade", "Contract(s) sent out") If inResponse <> 1 Or strResponse <> 2 Or strResponse <> 3 Then MsgBox "Must choose (1,2,3)" Exit Sub End If
I get a "Type Mismatch Error". All the values in the range are numbers, and LINEST should return a double, so I am puzzled as to why there is a mismatch...
I have hardcoded the range into the formula just to try and get it to work. Eventually this will be two variables and will look like this:
I am using the code below but it is coming up with a type mismatch error message and I'm not sure why? how I can stop this?
Sub PhilsCode2()
Range("A3:AE382").Select Selection.Interior.ColorIndex = xlNone Selection.Font.ColorIndex = 0 Selection.Font.Bold = True Selection.Font.Bold = False Range("A3").Select Dim myRow As Long Dim myValue As String
I keep getting this run time error when ever i edit cell on the worksheet that contains the following code. The italicized line is the culprit according tp the debug feature:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "I10" And Target.Value "O5:O9" Then ActiveSheet.Unprotect ("password") Rows("29:46").EntireRow.Hidden = True Select Case Target.Value Case "DEALER1" Rows("29:32").EntireRow.Hidden = False Case "VENDOR" Rows("29:39").EntireRow.Hidden = False Case "LQ" Rows("29:39").EntireRow.Hidden = False Case "78620" Rows("29:46").EntireRow.Hidden = False Case Else Rows("29:46").EntireRow.Hidden = True ActiveSheet.Protect ("password") End Select End If End Sub
This code came from the book, “VBA for Excel Made Simple” that I borrowed from the library. When I run the code, I keep getting the error message: Run-time error '13': Type mismatch.
The purpose of this form is to insert an extra row and add the representative name in the Rep Name list.
I have also attached the sample excel file and the explanation that came from the actual book.
Private Sub UserForm_Initialize() RepBox = "" SalesBox = "0" For Each Cell In Range("rep_name") RepList.AddItem Cell.Value Next End Sub
Private Sub AddButton_Click() RepBox.SetFocus With RepBox If .Value = "" Then MsgBox "Enter a name for the rep to be added" .SetFocus End If.............................
I can't understand why I am getting the above message on the code below. I have used it before in other spreadsheets with the same type of data.
Basically the macro should trim the data and get rid of any numbers at the start of the data (the data sometime has just a name other times it has a number then a name). In this case the data has 154 before the name. I am getting the above message on the section in Bold. As l is a string I would have though it could take both text and numbers. I have also tried it with Variant as the type and got the same result. I also dont't undertand why the error happens at this point rather than when Ls value is first determined.
Dim lastrowdatab, i As Long Dim j, l As String
lastrowdatab = Cells(Rows.Count, 1).End(xlUp).Row For i = 4 To lastrowdatab j = WorksheetFunction.Trim(Cells(i, 29)) Cells(i, 29).Value = WorksheetFunction.Proper(j)
I am dimensioning my variable as a Date, which it is! But I keep getting this error.
Public TargetRow As Integer Sub InitializeTargetRow() TargetRow = 4 End Sub
''''''''''''''''''''''''''''' ' ColorIndex 43 is GREEN ' ' ColorIndex 3 is RED ' ' ColorIndex 6 is YELLOW ' ' ColorIndex -4142 is NONE ' ''''''''''''''''''''''''''''' Sub HighlightRow()
I'm using this code to automatically change the format in column B and C depending on the currency selected in the corresponding cell in column A. USD, STERLING and EURO are custom styles I have created.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column = 1 Then If Target.Value = "USD" Then Target.Offset(0, 1).Style = "USD" If Target.Value = "USD" Then Target.Offset(0, 2).Style = "USD" If Target.Value = "STERLING" Then Target.Offset(0, 1).Style = "STERLING" If Target.Value = "STERLING" Then Target.Offset(0, 2).Style = "STERLING" If Target.Value = "EURO" Then Target.Offset(0, 1).Style = "EURO" End If If Target.Value = "EURO" Then Target.Offset(0, 2).Style = "EURO" End If
End Sub
I assume there is a better way to write this code but I can't do any coding, just copied it from the help I received Automatically change currency format.
Anyway, when editing more than one cell in column A, for example selecting two cells and pressing delete, I get the following error:
Runtime error nr 13: Type mismatch
(I think that is the correct translation from Swedish: "Körfel nr 13: Inkompatibla typer")
if there is any thing need to corrected please let me know i have read rules and tried to comply all
here is my question
I m receiving runt time error 13 type mismatch and could not resolve it till now. if some body can look into it and kindkly give some suggestions
Sub LineHours_Calc() Dim itms As Integer Dim qnty As Integer Dim upt As Integer Dim get1 As Integer Dim get2 As Integer Dim get3 As Integer Dim get4 As Integer Dim chg1 As Integer Dim chg2 As Integer Dim co As Integer Dim lhc1 As Integer Dim itm As Integer
error is in 3rd line in the inner for loop i pasted the line here as well (qnty = WorksheetFunction.Index(Range("board!$B$3:board!$DZ$500"), get1, get2)
in Master sheet i have defined values in list Column D & F
Column D has COUNTRY as heading and country Names below it
Column F has CITY and city list
I am column A i have 2 data list
as
COUNTRY CITY
I have dropdown in excel sheet (SHEET1) in Column K populated with data from MASTER in Column A ie city & country
When I select city i need Dropdown in column L to be populated with Citylist from MASTERS COLUMN F and if city seleced i need to get data from column D
I am attempting to concatenate several columns and I am getting the Type Mismatch error. I understand why I am getting this error, but I do not know any other way to accomplish what I am seeking.
I am getting a mismatch error on arrow pointed below. whenever a entered is then deleted in the cells i.e. H50 and H51. I've included the workbook here just in case. Is there a way to ignore error message so that it does not to show up??
Needs to automatically check user-entered values in column F. If the value is greater than 0, it needs to multiply that value by -1. If the value is negative, or the cell is empty, it needs to do nothing.
I keep getting runtime errors about type mismatch.
Please look at my workbook and tell me where I'm going wrong.
I am getting a Type Mismatch Error when I run the following code.
I need to have the name save as
06-01-2012 dispositions.xlsx
in a specific location that is in this line of code. When i have it put 'dispositions' first, it works, but i need the date to show first in the name. Am I missing an additional function or quotes?
