Group the same cells in each row,
if found, in Column 2 that refer to same cells in Column 1 and sum the cells in col 3 and 4 that refer in column 2.
Col 1
Col 2
Col 3
Col 4 1
272
0125
200
10 2
272
0125
100
5 3
273
203
500
85 4
274 ................
How would I code the Active Sheet to be renamed Sheet1?
View 9 Replies View RelatedI need to copy a value on an activesheet cell A1, to another workbook located at d:locationaaa.xls cell C3.
View 7 Replies View RelatedAll I want to do is copy the active worksheet to then end of another workbook. I have alread set my variables, here is the line that is causing me a problem: ....
View 10 Replies View RelatedI have a WorkBook with each sheet being a calendar month. I want to set the ActiveSheet as the current month so each time I open the WorkBook it opens to the current month WorkSheet not the last WorkSheet I was viewing.
View 12 Replies View RelatedGot a wee problem with some syntax for a copy function. At the moment the code i have copies the range and pastes to another range which is defined by a cell number. But i need it to paste special (values only).
View 5 Replies View RelatedI have looked at previous posts and found some information about ActiveSheet.Paste errors, which appear to be related to having activate, select and paste functions in the wrong order.
I am still getting an error at the ActiveSheet.Paste point of my code which I cannot seem to overcome, although this same code works on another macro doing exactly the same action...
ChDir _
"\workgroupHighlight_reportingTemplates"
Workbooks.Open Filename:= _
"\workgroupHighlight_reportingTemplatesProgramme report template.xls"
Sub WebQuery()
Dim strSearch As String
strSearch = "abc"
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://www.xyz.com/&=" & strSearch & "", _
Destination:= Range("A1"))
.Name = "search?hl=en&ie=UTF-8&oe=UTF-8&q=" & strSearch & ""
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = False
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = True
.RefreshPeriod = 0
.WebSelectionType = xlAllTables
.WebFormatting = xlWebFormattingAll
.WebPreFormattedTextToColumns = True
.WebConsecutiveDelimitersAsOne = True
.WebSingleBlockTextImport = False
.WebDisableDateRecognition = False
.Refresh BackgroundQuery:=False
End With
End Sub...
I wrote a macro on mac office 2004 which work perfectly on my pc but not on my mac.
The macro is very simple
Sub Delete_Next_Sheet()
ActiveSheet.Next.Delete
End Sub
It just delete the next sheet after the activesheet. However on the mac, it doesn´t recognize the Next. It display an alert mesage "Invalid or unqualified reference".
I was woundering if there is another way (as simple and as fast if posible) to get a macro avoiding loop and sheet.count to delete the next sheet after the activesheet.
I am trying to write a small sub which will make do an "AutoFit" for all columns of the Active Sheet. For example, the code below does an "AutoFit" for columns A:J of a sheet. How can I make it do the same for all columns (not only for columns A:J) of the ActiveSheet?
Columns("A:J").EntireColumn.AutoFit
I am trying to use ActiveSheet.Name formula to rename the active sheet. It is only working part of the time and I can't figure out why. I do know, however, when it is going to work and when it is not going to work. If cell A2 contains two words, it does not work. If cell A2 contains only one word, it does work. Here is the code. The highlighted part in blue is the code that names the sheet. I have attached sample spreadsheet if needed.
View 4 Replies View RelatedI've currently got a problem with renaming the ActiveSheet when multiple worksheets are present. The code below, utilizes existing fields on the worksheet and a concat with static text. The code works great if only one sheet is present. However, as soon as the second sheet is inserted in the workbook, I'm now receiving a 1004 error (application-defined or object-defined error).
Code:
Private Sub updateWorksheetName_Click()
Dim fNumber
Dim pCheckNumber
[Code].....
I have a ComboBox. When a user selects an item from the ComboBox and clicks a command button (Add Button) the selection that the user selected writes to a row in the active worksheet and then resets the ComboBox allowing the user to make another choice after clicking the "Add" command button. I am trying to remember how to write the code for row offset so that when the user makes their next selection from the ComboBox and clicks the "Add" command button it puts it the selection in the next row of the active spreadsheet thus creating a running list of the users choices. Here is a line of the
Private Sub cmbAdd_Click()
ActiveSheet.Cells(2, 3) = cbxSeverity
cbxSeverity.Value = ""
End Sub
After the tcbxSeverity.Value ="" line I was testing trying to get to the next row by using something like this:
Private Sub cmbAdd_Click()
ActiveSheet.Cells(2, 3) = cbxSeverity
cbxSeverity.Value = ""
ActiveCell.Offset(1,0).Select
End Sub
I know that this code is incorrect but I cannot remember how to offset or check Rowsource to move to the next line.
I am working on transfering some code from 2003 to 2007. I have gotten almost everything to work, but am now having an issue with the way it places the pictures into my spreadsheet.
The code asks the user to select a folder containing .jpg files. It then places each of the .jpg photos onto a single spreadsheet. Each picture is suppose to be placed in a different cell. When I step through the code, the active cell changes correctly based on the offsets, but it always pastes each photo in cell B4. Through some research I have found others to see this problem with ActiveSheet.Pictures.Insert in 2007.
Following is the
Private Sub BatchProcessThumb2x3()
Msg = "Select a file containing the photos you want to insert."
Directory = GetDirectory(Msg)
If Directory = "" Then Exit Sub
If Right(Directory, 1) "" Then Directory = Directory & ""
how to go about or refer me to how exactly you assign a closed workbook to be active. I know this sounds off and its probably the wrong way to word it so here's my problem. I am developing a macro in Visual Basic 2005 using VB. I have a connection string that looks like this:
Private m_sConn4 As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=C:2005.xls;" & _
"Extended Properties=""Excel 8.0;HDR=YES"""
What I need to do is connect to it and update which I have done successfully, then save it as 2006.xls. Is there some sort of m_sConn4.SaveAs or something of that nature.
Private Sub Workbook_Open()
'Application. ScreenUpdating = False ' Turns off screen updating
Dim Filename As String
Dim nFam As Integer
Dim cRow As Integer
Dim i As Integer
ws As Worksheet
Filename = "O:BVRMusers_sharedJCIntraday ToolFamily List.xls"
Workbooks.Open Filename 'Opens Family List
'Count the number of rows (Families) in Filename (Family List)
Set ws = ActiveSheet
With ws
. Cells(1, 1).Select
cRow = .UsedRange.Rows.Count
End With
End Sub
i cannot get ws to be set as the ActiveSheet. i receive a run time error 91 each time and cannot figure out what is wrong. i've used this code before under subform functions, but this is the first time i've placed it in the "ThisWorkbook" area.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
I have a workbook with 25 sheets containing metric information as part of a performance management model. Fundamental to this is the visual success or failure of each of these 25 sheets which I've highlighted by setting the worksheet tab colour accordingly. The code to achieve this is detailed below. This code is triggered by the Worksheet_Change event at the workbook level and works fine in single user mode. When the workbook is shared however, an error 1004 is generated.
Private Sub Worksheet_Change(ByVal Target As Range)
For Each c In Range("PassFail")
If c.Value = "Fail" Then
ActiveSheet.Tab.ColorIndex = 3
ElseIf c.Value = "Pass" Then
ActiveSheet.Tab.ColorIndex = 4
End If
Next c
End Sub
I am looking for a way to autofilter a list in "Sheet2" based on the value in Cell A2 of the ActiveSheet. I have about 20 tabs in a workbook that need to be populated with a monthly sheet that is pasted into "Sheet2" every month.
View 1 Replies View RelatedI'm trying to adjust my macro to fill the interior cell color of a row if there's a non-blank row above and below it (i.e. if there are 3 or more non-blank rows together, then fill the 2nd, 4th, etc. rows. If there are only 1 or 2 rows together, then don't fill the cells.
However, what I'm getting is filling ever other row, with this code. There seems to be an error in how I'm trying to use and If condition with 3 criteria.
Code:
Sub colorin()
Dim LastCol As Long
Dim r As Integer
r = 6
With ActiveSheet
LastCol = .Cells(5, .Columns.Count).End(xlToLeft).Column
[Code] ....
Here are some sample results (pretend cells with red text are actually cells with interior color, black text is an unfilled cell).
Rank
Name
1
Jones, Some
[Code] ......
What I'm trying to achieve is: (again, red text actually represents filled cells - can't get sample shot of actual filled cells to copy into forum post).
Rank
Name
1
Jones, Some
[Code] ...........
I'm trying to create a macro to Goalseek after certain conditions are met and then loop until other conditions are met. In my worksheet, the reference cells for the macro are as follows:
a. Range (U94:DL94) as Cash Available
b. Range (U95:DL95) as Distribution
c. Range (U96:DL96) as Monthly Cashflow
d. Range (U98:DL98) as the IRR calculation. IRR Calculation (If AT98 is active cell) = (1+IRR($U$96:AT96,0.01))^12-1. If AU98 is active cell, then IRR Calculation = (1+IRR($U$96:AU96,0.01))^12-1), etc.
I need the macro to do the following:
1) If value in range Cash Available > 0 and value in range IRR < 0.08, then goalseek
(set cell = (range IRR), Goalseek = 0.08, Changing cell = (range Distribution)
2) If Goalseek result in range Distribution < value in range Cash Available, set cell equal to value in range Cash Available.
3) I need GoalSeek to loop until value in range Distribution > 0 and whatever cell in range IRR = 0.08.
4) After first cell in range IRR = 0.08, I need the macro to start again on the same named ranges but for different rows lower down on the spreadsheet and do the same loop, but this time for range IRR(2) = 0.15.
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies View RelatedI have 2 reference cells with the date range to look for in C1 and D2.
G2 through IV2 have dates that run across.
I would like for the macro to look for the start and end dates in C1 & D2 and paste the new data as values from A1:B20 into those particular columns of dates within the range.
ABCD1head count23start7/1/092vac%5%end7/15/093iap%3%4misc%3%5off%21%6% ot0%7off%21%8% ot0%9rpr wk rt1.510inst wk rt5.0211go back %5%12nw Mvr %3%13fall out %10%14jep/incomplete %16%15lines in service116% esc3%17% change610%18churn rate60.994%19report rate0.297%20% of market2218%
Excel file attached! I need a macro to do the following:
Start with cell F4 and read the increment value from cell C4. Then add this with F3 and display the result. Continue with the same increment until it reaches the value equal to cell B4. Then read the increment from cell C5 and do the same until value equals cell B5. Repeat the same step until it reach the value equals B7. I did manually in the column F4 to F28. Moreover, the cell increment will change according to the variable in A2. In this case it is 25 and got 25 values to fill the column R.
creating a macro to send email from excel through Outlook basis of different conditions and with embedded text and subject.
There 2 workbooks attached with this post. The workbook named "Data" contains the data and the workbook named "Emails" contains the Dealer Names (in Column A), the Email ids of the contact person (Column B, C and D), the subject (in Column E) and mail content (in Column F).
I need a Macro which first split the data basis of "Dealer Name" Column F into multiple sheets from "Data" sheet. Now, each sheet will contain only the Individual dealer's data. The data whose ageing is 2 or more than 2 days (in Column H) is highlighted in yellow.
Now, I need to send a separate email to dealers with their data details from range A to F (including headers) as an embedded text with subject and mail content which is present in "Emails" workbook.
Now the twist is, if any dealer having the Aging value in Column H is 2 or more than 2 days (highlighted in yellow color) than the email should be sent in CC to Column D email ids but if there is no Aging more than 2 days than the email should be sent in CC to Column C email ids.
"To" email ids (in Column B), subject (in Column E) and mail body (in Column F) will remain same in both conditions. Column A is containing the Dealer Names through which macro will identify the email ids.
I want to insert a conditional test within a macro such that if a particular cell is set to "y", the macro must branch to the end. Is this possible?
View 7 Replies View RelatedI want to calculate the sum of column with two conditions on different
worksheets,
Example
Data
Stock #QTYMonth
01335208Aug-06
01337402Aug-06
01337392Aug-06
01335400Sep-06
01337100Sep-06
01337102Sep-06
If the stock # is equal to the stock # and Month equal to month
I need to get the result in another sheet as below.
Stock #Aug-06Sep-06
01335208400
01337794202
what would be the most effective and easiest formula to use if I want to sum a range of numbers meeting 2 conditions (or more).. eg.. sum all the unpaid invoices (condition 1) due on March (condition 2).
View 9 Replies View RelatedI have the following code:
=SUMPRODUCT(--($A$2:$A$400="OKC"),--($C$2:$C$400="AF33"),$G$2:$G$400)
It works great, but I am needing to now add a 3rd condition, or filter... In addition to it looking for "OKC" and "AF33" I also need it to sort by month. example; "March". I need it to be in code that works on old versions of excel as well...
Although I am not getting any errors, I am not having success returning proper answers with the formula below. Perhaps I cannot do what I am attempting.
=SUMPRODUCT(IF(AND($K$22:$K$169="A&B",YEAR($G$22:$G$169)-YEAR('Info'!$F$9)=0),(MOD(ROW($R$22:$R$169),2)=0)*($R$22:$R$169),0))
where: K22:K169 are user entered categories from a drop down list
G22:G169 are user entered dates
F9 is a user entered update date
column R are monetary values with first row being a revenue$ second row margin$
I need to summarize every other row (one row is revenue, one is margin) if the two conditions are met.
