Put (C) Within Cell But It Keeps Converting To Copyright Symbol?
Oct 19, 2011I am trying to put a (C) within a cell but it keeps converting to the copyright symbol. How do I amend this so I can just have a C in brackets?
View 2 RepliesI am trying to put a (C) within a cell but it keeps converting to the copyright symbol. How do I amend this so I can just have a C in brackets?
View 2 RepliesNeed a formula if there is one to extract from a cell only that data which is to the Right of the symbol > and to the left of the symbol (
View 3 Replies View RelatedI need to take cells such as the following from A1 down:
Baker, Helen
Brown, Joe
Smith, John
Roberts
Thompson, Karen
White, Daniel
Wright, Lisa
I need to move this to the next column but where there is a cell such as the 4th without a comma it needs to add ", N/A".
Basically it should make "Roberts" from A4 become "Roberts, N/A". I think it needs something to search for a comma and if it's not present to add that to the end.
Is there a way to define the end of a cell in a find/replace? I.e. I want to find characters like this:
;;[space character][end of cell]
and replace with
[end of cell]
(that is just delete the ;;[space character] bit when it is followed by end of cell)
I simply cannot insert a one eighth symbol in my spreadsheet.. I used to be able to see this in the Insert Symbols grib but now all I get are lots of question market.. if I use
selection.value = ChrW(8569)
the symbol does appear until I select the cell and press return, after which point it turns into a question mark.. I'm sure its something to do with my settings but I can't figure out what.. this is really important for me.
having a problem with a vlookup when the cell value contains ~
ie. John~Smith
it returns an #NA even when my lookup table has John~Smith in it.
I would like to embedd a symbol into a cell. I dont want it to be done by using Fonts. By symbol I mean Harvey Balls (Plan, Do, Check, Act) symbol embedded the same as the "and" (&) symbol. I have seen it done once on a spreadsheet but did not get a copy and I would like to recreate it as a way of visually showing the status of an action item.
View 14 Replies View RelatedI have a column ful with numbers and would like to add an h (hour) after every number. I found that it is possible for valuta (dollar sign). Is there a way for random symbols that are not in the valuta list?
View 3 Replies View RelatedI am trying to add a * at the end of a value in a cell, used to signify a note at the bottom of the page. However, as the cell contains a formula, excel thinks I am adding a multiplication sign instead.
Is there anyway to place a * at the end of the value, to show up in the cell as text? I would prefer not to have to paste the value of the cell and then add the *...
Cells in Columns A & B (57 rows deep) have a real time data feed and can have values of blank, "H", or "R". The H and R can remain in the cell for any length of time. I would like to have an audible ding go off whenever a new H or R appears in columns A or B. Is there a cell formula that can do this? I think a macro solution would not work, because the workbook has a macro that activates every 10 seconds, so I assume a macro solution would interfere if both macros happen to activate at the same time.
View 9 Replies View RelatedI need a code for filtering the cell's content.
What i want to filter and delete is all/any text found following after the symbol ">" .
I'm trying to make a formula but are failing. This is the data:
Cells:
a1= ant-gel
a2= ant - gel
a3 = size 1 - 6
a4 = size 1-6
a5 = book - 5
a6 = book-5
a7 = good book
I want a formula that displays "True" if cell contains a "-" symbol AND the dash symbol is surround on both sides by a number (a space can go between dash and number)
I want the results to go in column B
For example, if a1 contains a dash and dashes are surrounded on both sides by a number, then "TRUE", otherwise "FALSE.
therefore:
b1 = FALSE
b2 = FALSE
b3 = TRUE
b4 = TRUE
b5 = FALSE
b6 = FALSE
b7 = FALSE
Column (B) contains two different units, either (ug L-1) or (mg L-1). I have this formula, =IF(B2="(ug L-1)",A2/1000,A2), which copies the value in column A to column C, so for cells that are in (mg L-1) units, it's a direct copy, but for cells that are in (ug L-1) units, it divides the value in A by 1000. However, I can't remember what the formula should be if the cell contains a "<" symbol AND is also in (ug L-1) units.
e.g.
< 0.004(ug L-1)
How can I change that to <0.000004?
I have a sheet that when printed out, will have 1 or more check boxes (depending on a formula) beside various items. Basically, if in a datafield it shows that there should be 3 boxes beside a line, it will show similar to this (except the O's are check boxes).
Usable 3 times per day. O O O
In the actual symbols list, there are no such symbols. I think there must be another type of symbol available as I use: ►
I grabbed that symbol from another spreadsheet, and I have no idea where it came from. I have wanted a similar arrow that points to the left or up, but I have no idea where to find them. I only know that the spreadsheet accepts a copy/paste of this symbol, and it does not seem to be related to any particular font set.
where I could find a "empty box" symbol, and also tell me where symbols like ► come from.
Backstory: I am converting PDF documents to Excel files and some of the numbers are being transformed into a wonky date format which to the ***** eye looks semi correct but the underlying value in the formula bar is incorrect. Basically I need to copy and paste the value but when I paste special values it doesnt work. Below is the example
The cell value should be: 9856 When it is converted to excel the value shows 98 5 6 but in the formula bar it shows: 5/6/2098 The cell is formated as: Custom yy m d;@
If I get the value in the cell to read 98 5 6 I can use trim or something to get it down to 9856 but the issue is when I use those functions they return 72446. I guessing this is because they read the formula value not the cell value.
I need to somehow get the value in the formula bar to read 9856.
I need to use the following symbol (,, ▬ ) to show when my prices went up or down but when I try to use them in the VBA, they are replaced by a ?
I considered using the CHAR function, but its 255 characters do not incorporate the one I need.
I have a large list of data.
Approx 10,000 rows.
All I'm looking to do is delete in each row everything after the / symbol.
So everything after a forward slash gets deleted.
All my data is in ColA from A3 downwards.
Ideally would love a macro I can assign a button to.
As an example;
info@123croieres.com/Categories/travel-and-tourism-lodging.htm
So the above after the macro run would look like;
info@123croieres.com
I'm logging temperatures and I want to add the degree symbol "" to the end of the numbers, how do I do that? It's easy if I just use one number (#), but how do I do it when adding the lowest and highest in the same cell, e.g. 33-35?
View 9 Replies View Relatedi would like to automate the inserting of the symbol ...
i can do in a cell as the first entry, but i can't do at the end of a string's entry in a cell...?
ActiveCell.FormulaR1C1 = ""
or
ActiveCell.FormulaR1C1 = "Schukas"
I have whole bunch of formula's added to cells by code. So far so good. How could I then set in macro code that the result is stored in cell as value rather than formula? Now when I go to cell you can see =PIBVSearch(.... yadda yadda yadda in the field above.
I would prefer to change it so that content of cell changes to it's value so there's no formula visible(and above all not stored to harddisk(LOTS of disk space lost. Whole project started to trim down 269Mb excel file into smaller piece! I don't want it to go back there too easily...) or in danger of getting updated which might take a very long time easily).
Code works so that as long as there's rows which haven't got update yet but do have product run code(or something like that. Not quite sure what that number is but I figure it's product run) after code reached that far(which it copied from another file). Then for each row it calls functions for each cell which are responsible for filling invidual cells.
So either way to replace content of whole row with values or invidual cells, I can insert both into loop easily though whole row after cells are calculated would be a) faster to add(just one place to add, not 30...) and likely faster to run(project is about getting the file to run faster afterall...).
I am trying to create a document and i'm not sure if this is possible or not, but i'd like to type in a number in column A (1-10) and then in column B have a symbol appear corresponding to the number.
So if i type in 5 in Column A, Column B will have 5 squares pop up (or something along those lines), etc.
I would like to count all fields which contain the symbol checkmark.
In another instance I am using the formula
=COUNTIF(B124:B137,"X") to count all fields
which contain an X.
However I don't know the reference for the symbol checkmark.
I am trying to create a custom number format that will put a plus sign in from of the value in a cell if the value is positive.
Here is what I have been using:
+#,###;-#,###;"On Forecast"
There have been a few problems with this. Firstly, the values are have two decimals, and I have not been able to adjust it accordingly. Secondly, there are some cells that contain only a zero, and the custom format above changes the zeros to 'On Forecast. Other than these two issues, that custom format works.
I am wondering if there is a symbol for "text" that I can use in a formula. I.e., =if(C="text", "", INDEX(C:C,MATCH(D16,A18:A23,0)))
View 4 Replies View RelatedI'm using a large database - excel based, with lots of VBA and macros inside - where the default decimal format is “.” (period). When I copy and paste into a normal excel workbook format I want to replace the periods with comas. The paste function I'm using is “Match Destination Formatting (M)”.
I've recorded a macro to replace all of the periods with comas - still some of the values come up as a whole number, the period not being replaced with the coma.
I've tried almost all of the formats - text, general, number .... Still does not work.
I want to show the insert symbol dialog through vba code. How?
View 12 Replies View Relatedis it possible to take a cell, and add a symbol in between every word?
for example:
cell1 = i am having a good day
desired cell1 becomes = i-am-having-a-good-day
cell2 = super awesome
desired cell2 becomes = super-awesome
i have looked into the option of using Data > Text To Columns, then using = CONCATENATE(B54,"-",C54,"-",D54) to form the string
however, since the different cells have different lengths of words, the concatenate(cell,"-",cell...) is not flexible...
For copying cell content into an other cell one can use = in the receiving cell.
Is there an equivalent symbol that will only copy the formatting into the receiving cell, without using format painter?
Can complete formatting instructions for each cell be seen somewhere, similar to the data in the formula bar?
how to add Indian currency symbol before all numbers in my excel worksheet?
View 5 Replies View RelatedData in field A1 currently appears as below.
8/10
I want to extract everything to the right of the "/" in a new field.
The formula that I am using is =RIGHT(A1,FIND("/",A1)-1)
For some reason, I am only receiving a 0 in the new field and not the 10 that I expect.
What's odd is that the formula is working as intended on every other field except this one.