Removes All Code From The Active Workbook..
May 19, 2009
I have this script below that removes all code from the active workbook. The reason I am removing all the code is because I am running code from my personal library and the code changes the worksheet I am working with.So while stepping through I noticed it moves over to the sheet change sub routine from the active workbook that I am working on.
So I tried to remove all the code from the Active workbook but after I remove all the code it returns a expected end of sub error, where the old worksheet change sub was? but no code is in the entire workbook? So I tried to enter something in the blank sheet mod and it returns a (Cant Edit Module) error.
View 2 Replies
ADVERTISEMENT
Mar 24, 2013
I have a macro that copies data from several workbooks saved in a particular folder to a master workbook.
The problem is that this macro only works when it is included as a module in the master workbook. Unfortunately, I cannot ask the users of this macro to insert a module, copy the code and run it each time they want to consolidate the master workbook. Therefore, I wanted to use this code by including it in a Add-In that I already prepared. The problem is that this consolidation macro does not run when it is in an add-in. Create a code that I can include in a macro add in that would insert a module in the master file, include the code that I already have, run it and then delete the module? The add-in would be password protected.
View 7 Replies
View Related
May 17, 2013
i need a code to hide the sheets tab from the workbook. and only show the horizontal scroll bar and vertical scroll bar.
View 1 Replies
View Related
Feb 27, 2014
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
View 6 Replies
View Related
Jun 30, 2014
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
View 13 Replies
View Related
Feb 6, 2013
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
View 5 Replies
View Related
Jun 20, 2008
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
View 8 Replies
View Related
Mar 6, 2014
My requirement is as follows......
I want to get a copy of worksheet from specific workbook to active work book in which i want a copy of sheet get moved.
View 2 Replies
View Related
May 9, 2014
I am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.
View 3 Replies
View Related
Mar 6, 2014
I have a Picture in a workbook kept open. ( workbook 1 )And i have some X workbook open....i want a copy of sheet from workbook 1 To X workbook which is currently active.
View 1 Replies
View Related
Nov 20, 2006
I have a workbook that is a formatted report that I need to insert data from a name variable "CSV" file. I have created a macro in this workbook that calls an "Open" dialog for CSV files that I can use to browse to and open the source file. The macro then is supposed to "select all" copy and close the workbook then make the original workbook active and paste the data starting at row 2. The macro "seems" to be working perfectly except when I do the open the macro then makes the original workbook active, selects all copies then wants to close the original workbook. How can I tell the macro that the csv file that I just opened should be the active workbook, baring in mind that the name won't be known before the time it's opened so I can't hardcode the "active. workbook (NAME) "route.
View 9 Replies
View Related
Apr 22, 2009
I am trying to code a Macro so that i can take all the worsheets and save them as individual Workbooks. I wrote a macro that appeared to work, but, after it saves the first sheet as a workbook, i get a debug error.
MS VB Script error:
Runtime error '9':
Subscript out of range
Any advise would be greatly appreciated.
Thank you
Code is below..
Sub saveall()
'
'
For Each ws In ActiveWorkbook.Worksheets
ThisFN = "C:Documents and SettingsUserDesktop" & ws.Name & ".xls"
I = I + 1
Sheets(I).Select
Sheets(I).Move
ActiveWorkbook.SaveAs Filename:= _
ThisFN, FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, _
CreateBackup:=False
Next ws
End Sub
View 9 Replies
View Related
Nov 21, 2008
Someone kindly wrote this macro for me a good while ago. It has served me well to date
In essence, this macro looks at column A, and at every instance of a value it either creates a new sheet within the workbook, names it, the copies the entire row OR if there is a sheet already just copies the entire row.
View 6 Replies
View Related
Jul 30, 2008
Im having huge trubles with the interior color for the cells.
I have a macro that removes the color of a cell ("No fill").
For that purpose, I use the line:
View 8 Replies
View Related
May 11, 2007
I have an inventory sheet in which I am trying to accomplish two things:
1. Have comments pop-up when certain cells are selected that will explain to the user what kind of information he should enter. (So far, I have been able to make this work.)
2. When the user begins to enter information into the first of the aforementioned cells, a worksheet change event will automatically select the next cell for him, so that he will be immediately ready to enter information into it. That is, the worksheet will automatically "tab" over to the next relevant cell. (I'm having problems with this part.)
All in all, for each product on the inventory list, there are three cells that the user must enter information into.
Step 1: The ending inventory amount (the amount of product on hand).
Step 2: The user's initials.
Step 3: The time that the user physically counted the inventory.
(Then, when step three is done, the worksheet automatically tabs to STEP ONE ON THE NEXT ITEM. That is where I am failing miserably, although that is not the only place. . . . Keep reading.)
Here is my problem. I am not able to have my cake and eat it too. The comments are popping up beautifully, at the right time in the right way. However, when I enter the appropriate lines of code to make the worksheet change "tab" over the next cell, problems occur: the comments that provide instructions to the user do not stay visible. They flash for a split second, and then disappear. I am attaching a sample so you can see what I mean (and then I'm heading off to lunch with the boss, so it will be while before I can respond). The lines of code that I would like to have working are currently "commented out."
View 5 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Dec 28, 2005
Macro that will strip out all the numbers in 1 particular cell column and and leave the text.
View 9 Replies
View Related
Feb 1, 2007
I have hidden columns on a sheet.
I protect the sheet with a password before I send out the file to a 3rd party. However, it seems that all a user has to do is select the sheet cells, copy and paste onto another sheet or file. The protection is nonexistant and the user is able to unhide the columns.
Am I missing something?
Is there a way to "really" protect a sheet so that a user is unable to unhide confidiential columns? Preferably a method without VBA code.
View 9 Replies
View Related
May 8, 2008
I consider myself a power user of pivot tables, but recently, this one has stumped me.
For some reason every time I create a pivot table now, all the autoformatting options do NOT have borders in them AND is turning all cells color white; so I have to manually change the borders for each report. The autoformatting for non-Pivot Tables works fine still and I cannot find any option or setting that I would have changed to result in this. how to fix this or return the Pivot Table autoformatting back to normal?
View 3 Replies
View Related
Nov 11, 2009
I have a small userform (FormA) with two text boxes, a combobox, a help button, and an "OK" button. When clicked, the help button launches another userform (Form B), containing a text message and a "Close" button.
When I enter data into Form A, then click the Help Button to read what's on Form B, then close Form B, the data I had entered into the text boxes and combo box on Form A are deleted.
I've tried fussing with the modality, but that's not changing anything. I know I could write the text into a variable, then re-display it when Form B is closed, but that seems like a little (very little) extraneous stuff in an already bloated program.
View 4 Replies
View Related
Feb 15, 2007
I am working on an application where I have several workbooks open at the same time. I need to know which one is active. How do I do that?
View 3 Replies
View Related
Feb 21, 2008
I have an add-in (MyAddin.xla) that is called from my open_workbook event in my workbook (MyBook.xls):
Private Sub workbook_open()
AddIns("MyAddin").Installed = False
AddIns("MyAddin").Installed = True
ThisWorkbook.Activate
Run "MyAddIn.xla!WbookOpen"
End Sub
I put this in my WbookOpen procedure:
Sub WbookOpen(pWorkbook As Workbook)
MsgBox "Wbook Open Active workbook is " & ActiveWorkbook. Name
End Sub
The message displayed is:
Wbook Open Active workbook is MyAddin.xla
I thought this would be:
Wbook Open Active workbook is MyBook.xls.
View 9 Replies
View Related
Apr 21, 2009
I have 2 workbooks open in the same excel session. each with its own unique name. The macro looks for a specific name and then copies data from this workbook to the 2nd workbook. For some reason it no longer like the name of the workbook #1 which has not change (as far as I can tell) When I run the macro i get the run time error '9' subscript out of range, when i click on the debug this is what is highlighted and underlined.
View 5 Replies
View Related
Jan 20, 2010
I've manage to do this a while ago, unffortunaly my hard drive got damaged.
View 3 Replies
View Related
Apr 3, 2004
How do i calculate only the active workbook in VBA?
simple question, but i'm really slow today.
View 5 Replies
View Related
Oct 10, 2004
if it is possible to delete the current workbook that is open?
I'm thinking of using an add-in to delete the workbook i'm viewing
View 9 Replies
View Related
Feb 11, 2007
I have a number of files which I am opening, manipulating and copying the result to a master workbook
I am attempting to use code like this
Selection.EntireRegion.Copy Destination:= Workbooks(Master). Range("A" & LastRow)
Is it posible to define the value of LastRow without making Master the active workbook?
View 3 Replies
View Related
Sep 13, 2007
Is there a way to set up a cell selection event trigger through an addin when it is installed so that I can respond to selections made on user's sheets?
View 3 Replies
View Related
Dec 10, 2008
I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.
View 2 Replies
View Related
Oct 3, 2012
I need something that will exit all macros currently in place. The reason i am asking for this is because i have code that uses Application.Run to run another macro within the current code. If the other macro called on in Application.Run has a msgbox which has an OK/Cancel option, i want the Cancel button to exit all macros, not just the one that is used to access the message box via the Application.Run.
this is the portion fo the code that shows the cancel button and my attempt to use Exit Sub; however, this only exits the current sub, not all subs.
Code:
If TnC4 = vbCancel Then
msgbox "This application has been cancelled.", vbInformation, "CANCELLED APPLICATION"
Application.Run "CLEAR"
Exit Sub
End If
View 2 Replies
View Related
