All I am doing is setting up a Data Validation list of say 10 items then in another cell I am trying to use VLookup to pull the corresponding information required for the data selected in the list selection cell but I keep getting "N/A"?
Am I right in thinking that you can't VLookup from a Data Validation list? If not how do I get round this?
I've found a nice looking formula for looking up multiple values from a Data Validation List which you can find here.
Unfortunately I dont know why im getting a #REF! error for one of my spreadsheets. Here is my Formula {=SUM(VLOOKUP(A2,D:D,{6,7,8},0))}
A2 is the Data Validation drop down list that has most of the Values (Letters & Numbers) I want to look up. D:D is where it will find the Values (Letters & Numbers) and {6,7,8} is the currency I want added up and displayed.
I've tried this formula on other spreadsheets with success, but no success with the spreadsheet im working on currently.
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
Example 06.19.14.xlsx‎
troubleshooting dependent validation list formula. I found the Ozgrid instructions for the Dependent Validation Lists to be verfy informative and I downloaded the "MatchingLists.xls" to use as a starting point.
My challenge is this: The MatchingLists.xls example does not take into account that there may be MULTIPLE dependent lists that have spaces, numbers and other unique characters in the list's source celles. Therefore, I have decided to reference a NameLookup (named range) that has an abbrevieated name for each each item (without numbers & spaces) I am nesting VLOOKUP within the INDIRECT formula to achieve the results I need - but for some reason it fails occasionally and I do not know how to troubleshoot!
Data Validation Source =INDIRECT(VLOOKUP(SUBSTITUTE(E5," ","_"),NameLookup,2,0))
Excel's Data Validation simply returns the message "The source currently evaluates to an error". This is frustrating becuase it is not consistent. It works with some lists and not with others. How do I troubleshoot???
My worksheet is attached for your reference. The source data for the dependent lists is on the Lists sheet. The dependent drop-downs are in columns E-H on the drop-down sheet. The formula that I am having trouble with is in "Subcategory" (column F). For some reason, I cannot choose category "26_Heat_Exchangers" to populate the subcategories. There are a few other categories that this formula breaks on and I don't know why. Please tell me this is not some crazy limitation with Named Ranges.
I am trying to create an interactive Price List / Quote Form. I have 1 tab (price list) that contains all data arrays. I have 1 tab (Items) that correctly calls avalable quantities based on a validation list and then Vlookup populates the formulas with the correct pricing & notes based on the quantity. I would like on the cover/quote page to have a drop down (in cells B23-30) where someone can choose a product based on the list, and then have the collums C,D & F populate with the rest of th information:
Column C with quantities for that product
Column D with pricing based on that quanity
Column F with notes for that quantity
Column E will calculate total based on simple math
Enclosed is my file
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I have the following sitation:
xls Sheet 2
ITEM EQUIPMENT
1234 a
1234 b
5678 c
5678 d
xls Sheet 1
PO ITEM EQUIPMENT
56 1234 **
99 5678 **
** in the equipment cell of sheeet 1 I want a drop down (data validation) with the possible equipment I can use forthis item only. I.e. for PO 56 Item 1234 only the equipment a & b should be in the drop down menu.
I am using the code below to put a data validation list into A2. How do I code in the vlookups into that so that a query can be looked up based on that value?
=VLOOKUP(A2,Table_Query_from_MS_Access_Database,2)
=VLOOKUP(A2,Table_Query_from_MS_Access_Database,3)
=VLOOKUP(A2,Table_Query_from_MS_Access_Database,4)
=VLOOKUP(A2,Table_Query_from_MS_Access_Database,5)
=VLOOKUP(A2,Table_Query_from_MS_Access_Database,6)
I have put the spreadsheet here on box.net as it is too large to attach:
[URL] ..........
dear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies View Relatedis there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies View RelatedI have one column dedicated for the drop down list defined as 'Service_Level'. My second Columns is defined as 'Starter 1' which contains options that are included w/ the service level. My third column is defined as 'Starter2' which details the options that are in 'Starter1'. What I want to do is is have someone select from the 'Service_Level' drop down menu and then have it display Starter 1 and Starter2 data. I'm familar with Data validation and Vlookup, but I haven't been able to pull this off yet.
Another problem I've been running into is: since I have spaced in my first columns the drop down menu reflects this as well. Is there any way to filter the spaces for the drop down menu, yet keep them in the source field?
One other thing I should clairfy is that I want to be able to select 'starter, preferred, or extreme and have it reflect just the stats for those fields.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
Can anyone provide a formula to be used in data validation that will control text length (6 digits) and restrict duplicate entries. The best formula will prevent anything other that 6 digits, but question the user regarding a duplicate entry.
For example: if the user enters 123456 no problem, but if 12345 is entered, Excel validation would not allow. If the user enters 123456 again, Excel's validation window would allow but the window will pop-up and ask to confirm.
Excel spreadsheet will contain a form that will consist of drop down boxes (data validation). Each drop down box will define the data that can be selected in the next drop down box.
The way I initially went about it, is creating nested IF statements. However, we all know there is a limit of 7 nested IF statements. I have 10! So below formula does not work:
=if(B5=1,F5:I5, if(B5=2, F6:I6, if(B5=3, F7:H7, if(B5=4, F8:J8, if(B5=5, F9:H9, if(B5=6,F10:G10, if(B5=7,F11:H11, if(B5=8,F12:H12, if(B5=9, F13:I13, if(B5=10, F14:K14))))))))))
I tried other workarounds such as CONCATENATE, or & signs. No luck. VLOOKUP does not work also, because there are multiple columns in col_index_num. Anything else I try gives me this message:
“The List Source must be a delimited list, or a reference to a single row or column”
What should really happen is this:
User selects value in first list box. Second list box shows values associated wih the value from the first drop down only.
What I have attached is spreadsheet I've built to quickly generate an army list for a tabletop game. Anyone can click on the Force Organization Slot (FOS) and choose the type of unit and from there, select the specific unit name attached to that FOS. Each individual unit has a list of options/upgrades currently attached to the sheet from cells AD through AX and the points cost listed next to each upgrade.
For example, when selecting the Rhino unit from the Dedicated_Transport FOS, there should be 4 drop down lists of selectable upgrades (Storm Bolter, Hunter-Killer Missile, Dozer Blade, and Extra Armor). Currently, I have only named the ranges for the Rhino and Razorback units in order to get this working properly without having to go through the entire list of units and change names/create ranges/ect.
What I'm aiming to do is to create an individual drop down list that is directly related to the Unit Name cell in order to populate a complete and selectable upgrade list for each unit. I have played around with some functions that work in the spreadsheet (see cells X10:X12) but do not work properly with Data Validation.
Oddly enough, when I enter this formula under Data Validation:
=IF($A$3<>$AD$1:$AD$182,VLOOKUP(A3,Options,2,FALSE),"")
I do not get an error, yet the drop down list does not allow me to select anything as I thought it would.
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
Hello, could some one please help me with the following:
I have created a drop-down list for the range : C3:C65000 using Excel 2003 and Windows XP Pro. I did this using Excel's Data Validation Tool. The settings I used are as follows:
Allow: List
Source: =GROUPS
Check Box Ignore Blank is Ticked
Check Box In-cell dropdown is Ticked
GROUPS = GROUPS!$A$2:$A$29
Now all this works well, such that when I click in the cell range : C3:C65000, then a dropdown list appears - showing a list of all my groups.
However, when I click on any of the dropdown lists in this range, the width of the dropdown list is only as wide as the column. Column C has a width of 20.
What I need please is for the dropdown list to be as wide as the list of information showing in the dropdown list. If some one could please explain on how I can achieve this - that would be great.
I have a workbook that uses data validation from a list.
The same list is used in several of the individual sheets.
Can one use just one list for different sheets, as I'm having to create separate list for each sheet, which when an overall change needs to be made it is easy to miss one.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
I have a cell "project titles" entered in sheet1 that populates into sheet 2 - column "Project titles".
I need to keep the values in this column unique. So can I create a data validation such a way that I won't be able to enter values into this cell that are already on the list. This way I can avoid entering duplicates.
I try to find a solution (with or without macro) to assign different ranges named "Failure_C..." in a data validation source depending on the value of another data validation list (32 values called)
I started in the Data Validation List Source to fill in IF function but 32 inputs are not accepted and too much caracters in the source.
The formula is starting like that:
=IF(A57=$M$78,Failure_C01,IF(A57=$M$79,Failure_C02,IF(A57=$M$80,Failure_C03,
IF(A57=$M$81,Failure_C04,IF(A57=$M$82,Failure_C05,
IF(A57=$M$83,Failure_C06,IF(A57=$M$84,Failure_C07............
I am trying to make a simple planning sheet.
I have a workbook with 2 sheets.
1.sheet contains Columns : DayDateTimeClassTeacherCovered
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1
Harley
Lidia
Livia
Thais
Salete
Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
I have a list on one worksheet and I use a dropdown list from Data Validation to select the name required.
My list is so long that I would like to be able to type a letter or two to access to the name quicker instead of scrolling down.
I copied a formula that worked for someone else that put this formula in the data validation
(IF(I36<>"",OFFSET(Player,MATCH(I36&"*",Player,0)-1,,SUMPRODUCT((MID(Player,1,LEN(I36))=TEXT(I36,"0"))*1)),Player))
I do not wish to use VBA is possible.
I am trying to create a data validation list with a bar graph. I have tried using the IF and Vlookup formula, but its not working for me. I would like to be able to select classroom # from the drop down menu and the bar graph update selected with student’s name and selected data information. I have attached the file.
View 5 Replies View RelatedI am trying to set the below table up as a validation list. I am having issues with putting it in as list as it creates a new line every time a “,” (comma) occurs. I know I can use the custom and pull the list from a table, but I can’t use this option (the reason I can’t use the table, if interested, is because the single sheet with the validation contains about ~35,000 line items that are being split up into ~200 different sheets. Each sheet is then sent as a separate email…the problem with using the table is that it would on a different spreadsheet to begin with. The email only sends one sheet. As such, it would no longer be able to reference the table).
A - Less than $25,000
B - Between $25,000 and $49,999
C - Between $50,000 and $99,999
D - Between $100,000 and $249,999
E - Between $250,000 and $499,999
F - Between $500,000 and $999,999
G - Over $1,000,000
