Vba Clear Contents Of Column
I dont know how to copy an excel sheet into the question.
But assuming the following text starts at CELL C2 (this is just a section of the workbook)
C D E F G
This is a worksheet to test multiplication tables. I am trying to create a macro button to clear the contents of column F, for the kids to start again?
View Complete Thread with Replies
Related Forum Messages:
VBA Clear Contents
i am trying to use clearcontents with the below code but i get an error,
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
Macro To Clear Contents.
I'm trying to figure out code to have only the contents of cell 'a2' cleared when the contents of cell 'a1' is changed. The issue is that both cells are derived from lists and I don't want the formats cleared.
Clear Contents If 2 Characters Or Less
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
Clear Contents Vs Delete
I've been pressing on with my project and figured out that I really do not know the difference between Deleting and Clear contents. I really thought they were the same but am now unsure. I guess I have 2 questions. Which is better to use? what I'm doing is removing old data and importing new data. and which is more efficient for writing code.
Clear Contents Macro
I have a protected worksheet in which certain calculations are performed based on certain inputs.
For example, let's take Column E:
Starting in cell E4, I have cells in that column which are input cells and further down the column are calculated cells which are locked and whose formulas are hidden.
I was looking for a macro which would go down col E and clear contents of all unlocked cells without messing up any of the protected cells.
Also, there are certain cells in which I want to clear contents and some cells that I want the macro to insert a "0" value.
The input cells are non-contigous.
Macro Insert And Clear Contents
I am trying to get a macro that will insert a line above whatever line the text "INSERTXYZ" is in. I'm getting that fine but I also want to clear the contents of cells "A:S" on whatever the new row number is.
Can anyone modify this piece to accomplish that? If you need to tear it completely down, I'm interested in simpler way as well.
Selection.Interior.ColorIndex = xlNone
Application.CutCopyMode = False
Conditional Clear Contents Of Cells
I have a dropdown list in the range E17:E91 containing a list, and two of the values in the list are "DI" and "LTC". What I need to happen is if either of these are selected, the corresponding cell in column F needs to have it's contents cleared. Ex. if in E17 the value is ever either DI or LTC, cell F17 gets contents cleared. if column E contains ANYTHING ELSE, nothing happens. That's all, I've taken care of conditional formatting and data validation already. So even if data is pasted in the worksheet into column E it needs to recognize that and always act in real time.
Clear Contents Based On Criteria
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
Clear Contents Multiple Sheets
I have the following code for about 20 sheets
Sheets("Multi CT 43").Select
Sheets("Multi CT 61").Select
Sheets("Multi CT 80").Select
i'm sure there is a more simple way of doing this but I can't find a way that works.
Macro For Min Value Then Clear Contents
I need code for a macro that will find a min value in a particular column and based on that min value clear the contents of other cells for that min value.
For example, I have dates in column E such as:
Therefore, I need to find all records for 200707 and clear the contents in other cells.
I can't hardcode the min date because that can change from month to month when new files are created. As can the number of rows.
I'm using Excel 2007.
Clear Contents, Copy And Sort
I have 10 separate files that each have a data input sheet. I have 1 master file that has all 10 sheets in it and an extra sheet to display all 10 sheets information on 1. The drama I am having with sorting the master sheet is that every cell in the 10 sheets has a formular to copy what in the corresponding cell within the separate file. So techincally, the cells are not blank.
The cells range is B5:G1004 on every sheet. I paste 'values only' from the range of each sheet into the master sheet, but when I go to sort column B Ascendingly, it puts all the data at the bottom of the rows and there is 10000 rows on the master sheet. I cant get it to flip around. What I need is a way to clear the cells on the 10 sheets that do not have a value before I paste into the master sheet.
Clear Contents Of Filtered Range
I am filtering column S in a sheet to show all rows with a date after the end of the previous month - i.e. >= 01/01/07. What i want to do is clear the contents of those visible cells in column S. I tried the code below (got it on this site) but it works its way up from the bottom of the sheet until it finds the first visible row and then clears the contents of column S in each row above it, whether it is visible or not.
.AutoFilter field:=5, Criteria1:="<=" & Sheets("Filtered Statistics").Range("c3")
.AutoFilter field:=19, Criteria1:=">=" & Sheets("Filtered Statistics").Range("d3")
For i = Range("s65536").End(xlUp).Row To 3 Step -1
If InStr(1, ">=" & Sheets("Filtered Statistics").Range("d3"), Cells(i, 19).Value) = 0 Then
Clear A Cell's Contents
Is it possible using vba code to clear a specific cell's contents? I have a workbook that has text boxes that need the linked cell cleared when the workbook opens so the user can start fresh with empty text box's.
Clear Contents Of Cells In A Range, LEN=0
I'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.
It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.
So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.
I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.
It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.
I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.
Clear Cell Contents Based On Defined Name
I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.
The defined name is listed as "CommentsFields".
The worksheet name is listed as "QPRForm_V6"
I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.
Clear Contents Based On A Selection In Another Cell.
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
Clear Contents Of Range Based Upon Values
There is data(numerical) or blanks in each of the cells in the range H32:O37
I want to clear the contents if they are a duplicate of the previous line.
Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.
H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same
Clear Contents Of Named Range In 2007
I want to have users fill out. While it is possible to have it Read Only so that they always SaveAs I would rather put in a macro to clear the user input fields. I have done this in Excel 2003 and when I try using the same techniques in 2007 I get an Error 400.
I have all the cells (some are merged cells) in a named range and have the following code for clearing them.
Pop Up Activated On Clear Contents Code
I have a small workbook that copies 4 cells to a database list as per the code below, 2 of the fields activate a pop up calendar for date input on a button push the data is transfered to the sheet and the cells are cleared, however on the clear contents parts at the bottom of the code it reactivated the pop up calendar,
is there a way of not having this pop up when clearing the contents.
Clear Contents Multiple Non-Continuous Ranges
what is described in the post clear "contents of rows based on cell contents in column" clear contents of rows based on cell contents in column
What is different is that for rows that I wish to leave untouched, I have in column A the text "Active". If that text is not present (""), then I need to clear contents for only certain cells in each row because others have formulas. For example, if A32 does not say "Active" I want to clear contents of cells D:32, G:32, etc while leaving the others in row 32 in tact. I need this to loop through about 400 rows. If it would make the macro easier, I can have the data in column "A" say "Inactive"/"Active" instead of blank/"Active"
Clear Contents Based Upon Value In Row Range
I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Protecting Formulas In Cells From Clear Contents Command
I have a worksheet from which I regularly clear all contents by selecting all the rows and selecting 'Clear Contents' from the right button menu. However, I now have added a formula in Col Y that I want to protect. I know I could select all columns up thru X, but that would clear the R1 headers, so I want to avoid doing that. I can always work around, but I'm curious, is there a way to clear only values and thus protect the formulas when using the Clear Contents command?
Clear Contents & Change Color Of Cells
how to clear contents and change colour index of cells.
This is for a booking system. The current VB codes allows bookings to be made by entering a reference number, dates of bookings and room type and bed type. When the VB codes are executed, the cells corresponding to the details entered earlier, would fill the booking table with the reference number and change the colour fill (e.g. yellow) to indicate that the slots are booked. Please refer to attached sample.
However, I do not know how to delete the booking. I would like to assign a cell for user to enter the reference number that needs to be deleted. So when the reference number is entered into that cell, user could execute a function which will clear the contents and change the colour index to none for that particular booking with that reference number(s).
Attached is a sample of the problem.
Clear Formula If Date Has Passed Paste Contents
Have a macro where is some dates have passed the formulas are cleared but if the date is < than TODAY the value is left. All worked ok until I changed to formula to where the date calulated exclued weekends. Have attached example spreadsheet.
Forgot to add the marco was provided by the hard work of fellow Ozgrid memeber (Ger).
Clear Contents Of Cell Based On Comparsion Of Cell Values
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Dim r As Range
'Select range to sort
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
Clear Contents Of All Unlocked Cells (many Are Merged Cells
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
Macro To Find End Of Column And Paste Contents In Column 1
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
Color Fonts In Column G Based On Contents In Column E
I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.
Auto Fill Column B Based Contents Of Column A
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
If Column F Has “Out” And Column K Has Any Contents Copy The Row
I’d like to check each row in Column F and Column K of Sheet Check. If Column F has the contents “Out” and Column K has any contents inside its cell, I’d like to copy that row and insert it into Sheet Alert. As a result the same row will exist in Sheet Check and Sheet Alert. This code will cut the row out of Sheet Check and paste the row into Sheet Alert if the contents “Out” is found in Column F.
Clear Cells Using VBA
I need to clear all cells in a column that have a particular value. The value is sometimes a constant like "0" (zero) and sometimes is a value based on a formula. Is there a VBA code that will allow me to select those cells in column matching a particular value and clear them?
Clear Memory With Vba Code
I have a workbook, with coding that opens many workbooks and performs several updates in each one, it seems that for some reason there is build up of memory with big files etc, is there a way with code that after each workbook has been updated and before the master workbook loads the next workbook for update that i can clear all memory, similar to closing excel down completly and reopening ?
VBA To Duplicate Sheet And Clear 2 Cells
I have a spreadsheet that I have created as a door schedule for faculty members at our institution of higher education. The intention is for them to fill-in their office hours and courses along with a few other bits of information. One sheet should have their teaching and office hours and one sheet should not.
These are the cells that should be cleared once the sheet has been duplicated (F30, F31, G30, G31). Once the sheet is duplicated and those two cells' contents has been deleted, both sheets should be printed. Ideally, all of this would be initiated by clicking a hyperlink or something like that.