Move Down Column And For Every Blank Cell Clear Contents Of Cell To The Left?
Jun 1, 2014
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
I need to clear the contents of the cell in Row "A", if the cell in Row "I" is blank.
The issue, is there are roughly 1200 excel documents in a folder and subfolders. That is a painful amount of opening workbooks, sort ascending and deleting. Not on my top 10 list of things to do.
If someone could create a code to do this, and loop it through a folder (I can move all the files to a single folder manually, not an issue)
Is there a way to delete or clear a row on exit if no end date has gone into it. i.e. if the user clicks on the X button in the top right hand corner.
Every time the user clicks on start the date goes into the next empty row, if finish is clicked then the end date will go into the cell next to it. See example below. Here the user has started and ended correctly
column AB StartEnd 24/10/09 24/10/09 24/10/09 24/10/09
In the example below the user has forgotten to click on the finish button when they first clicked on start, they exited excel instead and no end date was inputted. When the user clicked on start again the start date went to the row below, however as there was no end date the last time, this time when they clicked on end button, then end date went to the first BLANK CELL
column AB StartEnd 24/10/09 24/10/09 24/10/09
I would want the delete row or clear row option, which ever would work best, to happen if the user clicked on the X in top right and corner or Exited excel via File.
Ideally I would like the row cleared and not deleted, I have read Clare Watts thread and we both seems to be having a similar problem, I have used some of the examples from her thread but non seem to work. So I now wish to go with a delete or clear row option on exit, if possible.
The row changes every time. The column for deleting or clearing would be A to AB. The end date goes in to Column B
So if the user clicked on start but did not click on the Finish Button then the last row with no end date would be deleted or cleared on exit from column A to AB
column AB StartEnd 24/10/09 24/10/09 24/10/09(This is deleted or Cleared of exit via X top right hand corner)
I am trying to figure out how to return the contents of last non blank cell in column B, based on the name in column A. So, if I choose "Sam", the result I am looking for is "blue". If I choose "Pete", the result I am looking for is "orange".
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like Variable 1 Variable 2 Variable 3
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59 then I60 clearContents, Select h59 Else select H59 Do until H3 is selected
Psuedocode Select table (A2:I Xldown) Sort Table by CAcode (H Col) Set Range as H3:Xldown Select Last cell with CAcode (Xldown) in H col For every cell in Range (H3:Xldown) Use If/thenIf Last cell = 2nd Last cell (H Col) then Clear contents of I col (last row) select 2nd Last cell (H Col) Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts() Dim r As Range 'Select range to sort Range("A2:I98").Select 'Sort CAcode in H col ascendingly Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal 'select range for comparisomn of CAcode Set r = Range("H3", Selection.End(xlDown))................
I have a 700 line spreadsheet and would like to delete the cell next to another cell if it contains a certain string. I.e if A1 to A3 equals "Test" then i would like to delete the contents of B1 to B3, But if A2 equals "Completed" then only B1 and B3 should be cleared.
Is it possible using vba code to clear a specific cell's contents? I have a workbook that has text boxes that need the linked cell cleared when the workbook opens so the user can start fresh with empty text box's.
I have a spreadsheet with data to row 5000. I have column Y that has an "X" in it. I would like some VBA code to look at each row up to 5000, in column Y for the "X". If it is there, clear the cell contents on the current row in columns T, U, and V.
I've tried modifying some existing code (excluding the Y column range of 5000) but keep getting a "Compile error: Wrong number of arguments or invalid property assignments". How do I set the 5000 limit and get this code back on track?
Sub RemoveBankDelay() n = WorksheetFunction.CountIf(Range("Y:Y"), "X") For i = 1 To n
My goal is to have my comment indicators on the top left of the cell like an error indicator and when you hover the comment appears on the left too instead of everything on the right. The reason for this is that I have a floating userform on the right and the comment always appears under it on hovering.
I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.
The defined name is listed as "CommentsFields". The worksheet name is listed as "QPRForm_V6"
I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.
Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.
My code so far is as follows:
Code:
If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _ MsgBox "Your Entitlement is currently 0", vbCritical, "Error" ActiveSheet.Range("K84:T84").ClearContents
The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
I have Column A and Column B. Every row in column A is populated, but only some of the rows in column B are populated. I need a formula that copies column A if B is blank. (i.e. If B6 is blank, copy A6). Thoughts?
I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
I'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.