I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph. e.g. if the cell displays 80% - the chart with show 80% - simple.
however, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
I'm looking for some code to change a cell's fill colour
eg. by selecting an individual cell in a range, say A1, the colour of a cell, say K1, in a corresponding range changes to yellow
or if I select multiple cells, say A1:A9, the colour of cells K1:K9 change to yellow
way to highlight selected cells if one of the selected cells equals a certain value eg
A B C D E
1 X X X Y X
2 X X X X X
3 X X X Y X
I select cells A1-E3 and if column D = "Y" then colour fill the row from A to E
I'm recording a macro, so a line in my graph is a specific green. The marker fill won't retain the green, it always ends up blue. the lines and marker line is green. no matter what color I try the marker fill will always be blue. How to correct this?
View 6 Replies View RelatedI am using a bar graph and would like conditional formatting for a series collection. So if the series collection is greater than 30%, the single entry (not the whole series) would turn red. I have attached an image of what I currently have. There is a data validation list at the top which tells the graph what series to use, so the data is always changing.
I hope this all makes sense. Basically, if an entry is above 30%, I want the single entry in the series to turn red.
I'm attempting to write a code that will change the colour of a series in a chart based on the name of each series. i.e. I have Roads, Water and Rail as three of my series names. can i somehow assign the colours yellow, blue and red to these series using macro code.
View 5 Replies View RelatedI have created a column chart and am now trying to change the colour of one
of the bars. Here is the code I am using:
With chtChart
ActiveChart.SeriesCollection(1).Points(2).Select
With Selection.Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End With
I have a stacked area chart located on its own individual worksheet. I would like to use VBA to apply colours to individual series based on the name of that series. I have applied the following code which I found on the following help forum, changing it slightly to fit my needs: http://www.ozgrid.com/forum/showthread.php?t=91381
View 3 Replies View RelatedIn cell A1 I have revenue projected & B1 I have actual revenue if the date in B1 is less than the date in A1, I would like B1 to change colour.
View 5 Replies View Related=$CS18=INDIRECT("Client_Options!"&ADDRESS($I18,97))
I want to say when CS2= same value as CS2 on the client options sheet (on the row specified in I2 sheet 1) change the colour.
How should this be tweaked to do that? I'm not getting it!
=$CS2=INDIRECT("Client_Options!"&ADDRESS($I2,COLUMN()))
Textbox background / text conditional colour change.
I have a textbox in an Excel form and wish the background and/or text font colour to be conditional i.e. if cell T45 > T41 then colour is yellow otherwise red.
I want to change the colour in a cell depending on the sum of two other cells.
ie
A3=1,B3=1
A4=2,B4=1
A5=1,B5=0
A6=2,B6=4
So i want if
A3+B3>2 THEN C3 TO HAVE GREEN COLOUR
A4+B4>2 THEN C4 TO HAVE GREEN COLOUR
A5+B5>2 THEN C5 TO HAVE GREEN COLOUR
A6+B6>2 THEN C6 TO HAVE GREEN COLOUR
SO IN THE END ONLY C4 AND C6 WILL HAVE GREEN COLOUR.
Is there any formula to do so with conditional formatting?
I'm trying to set a conditional formatting to do the following:
If A1 is greater than 1, A2 will change its background colour to green. So the format needs to be in A2.
Basically in A1 is a page number that we have reconciled our bank statement to (labelled as "64" or "65" and so on), A2 has the end of statement amount.
Every month end we do a bank rec, the green cell is a marker to show what point we reconciled up to previous month.
I want to use conditional formatting to change the colour of the entire row when the date on A1 is any date in September (01/09/09 to 30/09/09).
View 10 Replies View RelatedI am trying to setup a monthly calendar.
What I want to do is have it so that if you type "apples I want some", the cell changes colour to green, and also the apples doesnt appear in the cell. So when you press enter, all you will see is a green cell that says "I want some"
I was wondering if there was a way in VB within the worksheet to make this happen?
I have a simple due date spread sheet for tasks that need completing at work. I am able to make the 'Due date' cell turn red when it is equal to or less than todays date, using conditional formatting. No problem.
I also have a 'Date closed' cell which is populated with a date when the task is complete.
What I am struggling to do however is change the red 'Due Date' cell to Grey once the 'Date Closed' cell is populated with a date. In fact I would like the whole row to be greyed out once the 'Date Closed' cell is populated.
I also have an 'Open / Closed' cell, which tells me if a task is open or closed, being chosen from a drop down I installed. Could this be used as an alternative to the 'Date Closed' cell. ie If someone selects 'Closed' in cell A4 the whole A row goes grey.
How to colour cells depending on text in other cells, for example,
I would like cells D26:AA26 to turn light red if the letters 'FSM' are in cell 'E26' even if other text appears in it, eg 'SA+/FSM'
I have been playing about with conditional formatting but can seem to solve the mixed text issue?
I have included an example below,
Do you use a "*FSM*" around the formula?
[URL] ...........
I want to change the colour of rows depending on the letter that is in a column. I want it to do it over all the sheets of the document. In the G column there will be letters like 'W' and 'L' that signify something and I want to make it clear by changing the row colour fill. I've tried a few formulas I found by googling but they didn't work. I should point out that the letters are connected, so if I put a 'W' on the second sheet it appears on the first sheet as well.
View 2 Replies View RelatedExcel 2003
On one of our computers at work, Excel is acting especially strange. The conditional formatting in Excel on one of our computers is not working. In addition, we cannot fill a cell with any color or change the color of the writing. We can click a color for the letters and type it in, but immediately after another cell is highlighted, the writing goes black again. When we try to highlight multiple cells with the cursor, the cells are black instead of the normal color. This happens to not just spreadsheets that are new, but existing spreadsheets on our shared drive from only this one computer as well. No other computers are affected this way. All other computers show the spreadsheets fine and do not have any functionality issues.
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I have two dates lets call them cells A1 and A2. I then have another cell that caluclates the difference in these dates into a simple number (ie not another date) - A3. I need one of two things.
Ideally I want the whole cell (A3) to appear as a Green (fill) cell if the value is below 5, appear Orange if beween 6 and 9 and appear as red if its 10 or over.
I do not know if you can colour a cell that has a formula in already. So what follows is my current 'work around', which, if you can not colour the A3 cell, then I would need this cell coloured (A4). =IF(D12>7,"Urgent Attention",IF(D12<5,"New",""))
If there is a colour in a cell that I want to use in another cell how can I find what the colour is, and/or copy it to the new location?
Sometimes a colour other than those available as a "standard" colour is used and it is almost impossible to match it by trial and error.
I realise that the Format Painter can be used but I often just want the colour only and not have the rest of my format altered.
I want to gradually change th colour in a block of cells. my plan is to use code to sequentially fade through ten or so shades from light to dark. is there a way to slow the code down so that it takes a couple of seconds to run the sequence?
View 2 Replies View RelatedCode:
ActiveSheet.Range("A1:G40").Interior.ColourIndex = 6299648
I am trying to fill the above range of cells with a colour, but keep getting an error message.
Column A = Dates in ascending order
Im after the code for searching this coloumn for 8 dates i have listed elsewhere and then i would like it to apply rose colour just to the dates in column a.
how do i link with specified dates?
With Selection.Interior
.ColorIndex = 38
.Pattern = xlSolid
End With
End Sub
I have been working on a spreadsheet but I use autoformat for.
For example if the date in the cell matches today's date then it turns the text read and makes it bold.
I was wondering if there was a way to format several cells in a row if a certain criteria was met.
for example
A B C
1 Item Cost Quantity
2 Car £11,520 2
3 Bike £7,500 1
4 Tyres £50 4
Now for example if I set a condition whereas the quatity is greater than 3 then it would highlight the whole row.
So in the example above I would like to to highlight row 4 and Fill colour cells A4,B4 & C4 with a yellow background and Red Text and make the texted bold.
I'm trying to create an excel spreadsheet to manage personnel and various ongoing projects, what I'm trying to do is create a custom box with a selection of options (5) that will automaticaly fill a selected range of cells with a colour and 'merged' text that was selected from the custom box.
View 7 Replies View RelatedI have a problem relating to a bar chart that I just can't get around. I have Excel 2003. My problem is this. I have created an attendance record sheet for members of a club. The sheet records attendances for two separate events which occur a week apart every month. The names of the members are shown vertically in one column. Multiple parallel columns then follow in which members' attendances are recorded. At the top of the sheet, at the head of each attendance column, are two headings, one on top of the other. The first of these is the date, and the second is the attendance rate shown as a percentage. I can generate a bar chart alright from these two headings. My problem is that I want some way of showing the two different events every month as two different colours, event one in red and event two in blue, so that they will stand out. So far the chart will only let me show everything in one colour.
View 9 Replies View RelatedI need to fill 2 other cells with varying colours dependant on what is chosen within another cell.
I have a drop-down list in cell A2 to select either ON SITE, ACTIVE or CANCEL.
What I need then basically is...
if A2 equals 'ON SITE' then fill other two cells (A3 and B1) GREEN
if A2 equals 'ACTIVE' then fill other two cells (A3 and B1) YELLOW
if A2 equals 'CANCEL' then fill other two cells (A3 and B1) RED
[File attached]
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
=IF(AND(Q6>=D9,Q6<=E9),OR(IF(C9="Planned","P",""),IF(C9="In Progress","IP",""),IF(C9="Late","L",""),IF(C9="Complete","C","")),"")
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
