I am trying to setup a monthly calendar.
What I want to do is have it so that if you type "apples I want some", the cell changes colour to green, and also the apples doesnt appear in the cell. So when you press enter, all you will see is a green cell that says "I want some"
I was wondering if there was a way in VB within the worksheet to make this happen?
I want to change the colour in a cell depending on the sum of two other cells.
ie
A3=1,B3=1
A4=2,B4=1
A5=1,B5=0
A6=2,B6=4
So i want if
A3+B3>2 THEN C3 TO HAVE GREEN COLOUR
A4+B4>2 THEN C4 TO HAVE GREEN COLOUR
A5+B5>2 THEN C5 TO HAVE GREEN COLOUR
A6+B6>2 THEN C6 TO HAVE GREEN COLOUR
SO IN THE END ONLY C4 AND C6 WILL HAVE GREEN COLOUR.
Is there any formula to do so with conditional formatting?
Excel 2003
On one of our computers at work, Excel is acting especially strange. The conditional formatting in Excel on one of our computers is not working. In addition, we cannot fill a cell with any color or change the color of the writing. We can click a color for the letters and type it in, but immediately after another cell is highlighted, the writing goes black again. When we try to highlight multiple cells with the cursor, the cells are black instead of the normal color. This happens to not just spreadsheets that are new, but existing spreadsheets on our shared drive from only this one computer as well. No other computers are affected this way. All other computers show the spreadsheets fine and do not have any functionality issues.
In cell A1 I have revenue projected & B1 I have actual revenue if the date in B1 is less than the date in A1, I would like B1 to change colour.
View 5 Replies View Related=$CS18=INDIRECT("Client_Options!"&ADDRESS($I18,97))
I want to say when CS2= same value as CS2 on the client options sheet (on the row specified in I2 sheet 1) change the colour.
How should this be tweaked to do that? I'm not getting it!
=$CS2=INDIRECT("Client_Options!"&ADDRESS($I2,COLUMN()))
I'm trying to set a conditional formatting to do the following:
If A1 is greater than 1, A2 will change its background colour to green. So the format needs to be in A2.
Basically in A1 is a page number that we have reconciled our bank statement to (labelled as "64" or "65" and so on), A2 has the end of statement amount.
Every month end we do a bank rec, the green cell is a marker to show what point we reconciled up to previous month.
I want to use conditional formatting to change the colour of the entire row when the date on A1 is any date in September (01/09/09 to 30/09/09).
View 10 Replies View RelatedI have a simple due date spread sheet for tasks that need completing at work. I am able to make the 'Due date' cell turn red when it is equal to or less than todays date, using conditional formatting. No problem.
I also have a 'Date closed' cell which is populated with a date when the task is complete.
What I am struggling to do however is change the red 'Due Date' cell to Grey once the 'Date Closed' cell is populated with a date. In fact I would like the whole row to be greyed out once the 'Date Closed' cell is populated.
I also have an 'Open / Closed' cell, which tells me if a task is open or closed, being chosen from a drop down I installed. Could this be used as an alternative to the 'Date Closed' cell. ie If someone selects 'Closed' in cell A4 the whole A row goes grey.
How to colour cells depending on text in other cells, for example,
I would like cells D26:AA26 to turn light red if the letters 'FSM' are in cell 'E26' even if other text appears in it, eg 'SA+/FSM'
I have been playing about with conditional formatting but can seem to solve the mixed text issue?
I have included an example below,
Do you use a "*FSM*" around the formula?
[URL] ...........
I am using conditional formatting to set the colour of a cell. I now want to change the colour of the adjoing cell to the same as the conditional format cell. CF doesn't have this as an option
View 6 Replies View RelatedI need a formula which will, alike conditional formatting, change the colour of a cell based on date or another cell.
For Example, If I was to enter a value of today's date it would be green up to a 3 month period, after 3 months it turns to amber and after 6 months red.
I can do it with conditional formatting on the date function when converted to days (see attached). Is there any way I can make the date updated column automatically match the date difference colour with a formula?
Prices and Costs - Carbon Steel.xlsx
I have five columns D3 to H3 all with different amounts/currency value. I'm looking to get a formula or use conditional formatting to scan those five cells and highlight one of them green when Excel has determined which one is the cheapest out of the five.
View 14 Replies View RelatedI have been assigned a task to create one table by counting how many cells are in red, yellow, blue, white colour.
red: indicate the certificate which will expired within one month
Yellow: indicate certificate which will expired within 2 to 3 month
blue: indicate certificate which expired
white (without any colour): indicate certificate that will expired in the future which more than 3 month
The table shall consist of "non-expired cert" - red and yellow; expired cert and total cert.
way to highlight selected cells if one of the selected cells equals a certain value eg
A B C D E
1 X X X Y X
2 X X X X X
3 X X X Y X
I select cells A1-E3 and if column D = "Y" then colour fill the row from A to E
what i would like to do is change the fill colour of D68 if the word Air appears with in D5:D65?
View 6 Replies View RelatedIm trying to create a stock database based on a colour traffic light system. I have 2 set columns, the first is 'recommended stock' the second is 'actual stock'
When you paste in your requirements into the 3rd column it subtracts it from the acutal stock which tells you how much your recommended stock is short by.
What ive got as well is any stock above 1+ shows up in green (this needs changing - see below), anything below 0 shows up in red. What im struggling with is i want a rule that reads the recommended stock level, then flags it up yellow when the actual stock levels drop to 10% of full stock.
how to use the conditional formatting if that is the way.
I have a spreadsheet of stock data open, high, low, close etc., that streams in real time from thompson reuters. i am trying to conditionally format the G column which is the "(HIGH)" price of the day to alert me when the value of that cell changes price. Basically during the first 15 min of trading my software filters down the top performing stocks of the day. During that time i drag and drop the information in the excel program that is linked to the stock quotes program which might give me up to 30 or 40 stocks. The conditional formatting is to alert me after the 15 min mark if the "(HIGH)" value in that column has changed price to a new high. I can control the stream of the data with a button that turns off the data stream so that it only goes live after 15 min.
photo (1).jpg
On this particular formula but my colleagues have informed me that they require cells with no dates in to have no colour fill. Firstly, I have searched and tried myself with no success on stopping the below formulas from filling empty cells with red, they are as below;
Code below for 11 months after entered date:
I am trying to colour a whole row of data (in columns A through to AA) based on the numeric entry in column AB. The numeric entry is either 1, 2 or 3. I reckoned I needed to use the IF function, but as writing formula is not my strong point I am struggling to enter the correct data! The first row of data I wish to use is 3. I have tried the following but to no avail: =IF($AB3,1). =IF($AB3=1). =IF($AB3="1").
View 5 Replies View RelatedI am having problems with conditional formatting,on sheet1 ,if column "n" is yes then it is coloured red,when I search database say f124 I would like all records for f124 to appear and keep column "n" red or even better the whole row red,it seems just to locate all records with "n" =no and all orange /brown colour
View 6 Replies View RelatedI'm designing a holiday chart in work, and am using conditional formatting to colour cells. The problem is I have more than 3 conditions. Consequently I need to use a macro.
View 5 Replies View RelatedI would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
View 2 Replies View RelatedIf a cells value is between to numbers then I need to change the color of that specific cell to green otherwise cell is to turn red. Also all cells without a value defaults to yellow.
View 9 Replies View Relatedchange the colours of alternate rows in order to make reading line by line easier. I know that I have used this before as a Conditional action ie:- if(mod...... etc
As always, the program I used it in has 'disappeared' so I can't check back with that.
Cell B157 is changed by checkbox 1= TRUE, 0 = FALSE
Cell H1 and Cell H2 are percentages changed by the user.
Range(AI8:AQ8,AI12:AQ12,AI16:AQ16,AI20:AQ20, etc) each cell in the range contains a formula, and is protected from the user.
I need the contents of each cell in the range to change font color (independent of each other) when the formula of any of the cells within the range changes - to the following
If B157 = 1
Cells < H1 (a percentage changed by user), would turn Red
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Green
If B157 = 0
Cells < H1 (a percentage changed by user), would turn Green
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Red
I need it to fire whenever the value of one of the cells in the range changes.
I have tried If statements, Select Case, and a combination of both but just can't get it!
Textbox background / text conditional colour change.
I have a textbox in an Excel form and wish the background and/or text font colour to be conditional i.e. if cell T45 > T41 then colour is yellow otherwise red.
I have a column of cells that changes colour when certain text is entered into them, ie "TIME" will make the fill colour brown. However, when other text is entered into the cell alongside "TIME", the conditional formatting doesn't change the colour of the cell. How do i get around this so it picks up on the "TIME" text even when other text exists alongside it?
View 2 Replies View RelatedIf a cell cntent includes a symbol [as an arrow, for instance] beside the text,the font colour does not change as required when the condition is met.
View 2 Replies View RelatedI have figure A1 column which total amount accounting at cells A31. I need figure 360 as a benchmark calculation perfectly been done. In this calculation 360 well off inside cells A18 although actual number is 363. If we use Conditional Formatting when had enough total in cells the achieve 360, cells colour will be transformed to red. What formula which need I used to change no matter cells on A1 to A30 if sufficient study 360 automatically cells changing colour to red
View 5 Replies View RelatedI am tracking figures over four weeks with a target of 4 sales per week. I have formatted the cells to light up - Green for 4 sales or more, Amber for 3, Red for 2 or less. I have set a monthly column up at the end of the table and want it to update the figure and colour that each member of my team is currently on. I can get it to change colour for the full 4 weeks worth of figure but want the montly column to be live and not cumulative. For example after 2 weeks if the total sales a member had achieved was 9, I would want the cell to be green. If after 3 weeks they had still only achieved 9 I would want the cell to change to amber once the 3rd weeks '0' figure had been added.
View 1 Replies View Related