I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
View 5 RepliesIs there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedIm trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have a Combo Box on a Work Sheet that the user selects a subject from. When the Combo Box content changes I need it to run a macro. Ive tried putting this in the WorkSheet file for the sheet
View 3 Replies View RelatedI have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I have the following code what it does, is when a user changes a cell it copies the row to another sheet along with the userstatus. Problem is if the user pastes more than one column of data into the sheet it copies the row more than once depending on the amount of columns the user pasted . I only want to copy the row once.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim SelRng As Range
If Not Intersect(Target, Range("A3:K30")) Is Nothing Then
Set SelRng = Target
Application. ScreenUpdating = False
For Each cell In SelRng
Range(Range("A" & (cell.Row)), Cells(cell.Row, Columns.Count).End(xlToLeft).Offset(0, -5)).Copy
Sheets("Tracking").Select
ActiveSheet.Cells(Rows.Count, 31).End(xlUp).Offset(1, -13).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveCell.Offset(0, 13).Value = ActiveWorkbook.UserStatus
Sheets("Engine 1").Select
Next cell
Application.CutCopyMode = False
Application.ScreenUpdating = True
End If
End Sub
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
As per the following code I'm trying to add a new sheet which should inclide the CHANGE Event Proc
Unfortunatelly, I get an error message (free translation from Hebrew):
====================
RunTime Error '1004':
"Programming entrance to the Visual Basic Project is not secured".
===========================================
Here is the code I used:
Sub AddSheetWithCode()
Dim StartLine As Long
Sheets.Add
With ActiveWorkbook.VBProject.VBComponents(ActiveSheet. Name).CodeModule
StartLine = .CreateEventProc("change", "worksheet") + 1
.InsertLines StartLine, _
"if not intersect(target,range(""a1:a10"")) is nothin then" & Chr(13) & _
"if target=10 then" & Chr(13) & _
"target.clearcontents" & Chr(13) & _
"msgbox (""Bla...."")" & Chr(13) & _
"end if" & Chr(13) & _
"end if" & Chr(13)
End With
Application.VBE.MainWindow.Visible = False
End Sub
how to eliminate the error.
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
[Code] ...........
Cells in Column M have a data validation drop-down list. If the user selects 'Closed', I want this code to run:
View 12 Replies View RelatedI want to know if it is possible to have 2 workshhet change events for one sheet. Let me explain this. Presently I have one workshhet where if any value ie entered in column A automatically date and time is entered in column B. I can do this by using folloing code.
View 5 Replies View RelatedI've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
View 5 Replies View RelatedIn a Worksheet On Change event I am trying to obtain a new value that the user has placed into a particular cell.
However, when I get to the line of code that reads the value in that particular cell, it is pulling the value that was in the cell prior to the change. When I view the sheet I can see the new value. When I do a debug.print or ? in the Immediate Window it shows the prior value.
Dim bfr As Long
bfr = ComboBox1.Value
ComboBox1.Value = bfr: Exit Sub
how come this gives me a "cant change property" error!?
The code is inside my combobox change event...
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then
Call time_start
Else
End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then
If Target.Cells.CountLarge > 2 Then Exit Sub
Application.EnableEvents = False
Target.Value = UCase(Target)
end sub
I have a userform with a text box.
The text box has a change event associated with it Depending on the circumstance I want to disable the change event for this textbox.
I have tried application enabled /disabled but this is only for work sheets
I have tried the following with no avail Public mbEvents As Boolean 'added this in so all the modules can accsess it
mbEvents = False
If mbEvents = False Then Exit Sub
do my code here
mbEvents=true
I am trying to capture the value of a cell before a change even. The attached Macro will report the value before the change but does not store it so that I can use it in another module. What I am trying to do is capture the value before the change and then look that value up in another worksheet (in the same workbook) so I can make the same change in the second workbook.
The values will always be in Column B and will always be string characters.
The code I am using for the change event is as follows: ....
I have two worksheets, and when the value in one changes I'd like the value in the other to change as well. Pasting a link doesn't work, because on the "Paste to" sheet I've applied conditional formatting, and it doesn't register a change event when it's a pasted link. I tried running a macro to copy the whole column and paste it on a change event, but that didn't alert the conditional formatting to kick in.
The "Paste From" sheet has dropdowns in column C. The "Paste to" sheet has corresponding dropdowns in column F. So, if someone changes the selection in C3 on "Paste From", I'd like F3 on "Paste to" to change.
I have a user entering text into a textbox on my userform. The textbox is linked to a textbox change event. Unfortunately, the event is triggered as soon as the user enters the first character of their entry. I'm thinking that the textbox change event isn't the most appropriate for this scenario. What would I need to do to trigger the code (of the change event) with hitting ENTER when finished?
View 9 Replies View RelatedI am populating column D with
=IF($C2="","",VLOOKUP($C2,Name_ID,2,FALSE))
Based on selection in column C populated using a drop down list from a range titled PracticeID. Other named ranges, all on sheet titled Validation, are PracticeName and Name_ID (a 2 column range made up of PracticeName and PracticeID). This works great the first time a selection is made in column C. But, of course, if the user needs to change the selection in column C, the value in column D does not change. Would the cell change event be the appropriate place to place this action?
If no program (code) is running and Calculation is turned to ON, what expression could be placed into a cell that will change on its own that could necessarily and periodically trigger a change event subroutine. How can I trigger a change event when nothing is changing?
I have a situation where my code simply stops running so i need a change event to assess whether code is running (or not) and to issue a warning to the programmer that the code is, in fact, stalled. The change event subroutine has not only a warning system but a "timetorun" feature that will come back and warn again until the programmer can address the issue.
Unfortunately, I have to deal with this issue in a check and balance fashion because my many attempts to seek solutions to a stalled program (root cause) have failed.
When changes are made to one sheet, I want it to update a table in another sheet. However, a good portion of the changes will involve adding hyperlinks to my original sheet. However adding hyperlinks doesn't seem to fire the worksheet_change event.
Is there a way to listen for when a hyperlink is added (and to which cell)?