Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then Rows("5:5").Select
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub If Target.Address = "$A$1" Then 'Ensure target is a number before multiplying by 2 If IsNumeric(Target) Then 'Stop any possible runtime errors and halting code On Error Resume Next 'Turn off ALL events so the Target * 2 does not _ put the code into a loop. Application.EnableEvents = False Target = Target * 2 'Turn events back on Application.EnableEvents = True 'Allow run time errors again On Error Goto 0 End If End If End Sub
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value UserForm1.show End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
I have this code working fine. It applies conditional formating to two rows ((K3:K65) and (J3:J65)) and checks when a value changes in row B to reaplpy the formatting. I'd like to had add more columns to it. It would have apply the same conditonal formatting on rows ((O3:O65) and (P3:P65)) but when a value changes in row (N3:N65)
So basically, I want to keep the first working part of the code and have it to check at more rows with a different reference for the conditionnal formatting.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range Dim rngJ As Range If Target.Count > 1 Then Exit Sub Set rng = Union(Range("B3:B65"), Range("J3:J65")) If Intersect(Target, rng) Is Nothing Then Exit Sub Set rngJ = Range("K" & Target.Row) Select Case rngJ.Value Case "" rngJ.Interior.ColorIndex = xlNone rngJ.Offset(0, -1).Interior.ColorIndex = xlNone Case Is >= 20.............................
I have the following code what it does, is when a user changes a cell it copies the row to another sheet along with the userstatus. Problem is if the user pastes more than one column of data into the sheet it copies the row more than once depending on the amount of columns the user pasted . I only want to copy the row once.
Private Sub Worksheet_Change(ByVal Target As Range) Dim SelRng As Range If Not Intersect(Target, Range("A3:K30")) Is Nothing Then Set SelRng = Target Application. ScreenUpdating = False For Each cell In SelRng Range(Range("A" & (cell.Row)), Cells(cell.Row, Columns.Count).End(xlToLeft).Offset(0, -5)).Copy Sheets("Tracking").Select ActiveSheet.Cells(Rows.Count, 31).End(xlUp).Offset(1, -13).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ActiveCell.Offset(0, 13).Value = ActiveWorkbook.UserStatus Sheets("Engine 1").Select Next cell Application.CutCopyMode = False Application.ScreenUpdating = True End If End Sub
is it possible to have a userform activated as a result of a Worksheet_Change event on more than 2 cells. Currently I have the code below which will activate userforms if either a cell in Column G or a cell in Column T is changed.
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Intersect(Target, Range("G:G", "T:T")) Is Nothing Then Exit Sub If Intersect(Target, Range("G:G", "T:T")) = "" Then Exit Sub If Not Intersect(Target, Range("G:G")) Is Nothing Then GlngRow = Target.Row Call Module3.ShowList1 End If If Not Intersect(Target, Range("T:T")) Is Nothing Then GlngRow = Target.Row Call Module3.showlist4 End If End Sub
What i need to do is activate another userform if a cell in Column AC is changed. I tried this code but got an error "Compile Error: Wrong number of arguments or invalid property assignment", which leads me to believe I can't add any more cells to the argument and it highlights the word Range in this line - If Intersect(Target, Range("G:G", "T:T", "AC:AC")) Is Nothing Then Exit Sub..........
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
I have the following code that I would like to trigger when cells B26:U26 change to something other then 0 due to a formula? How was I make this happen?
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value If UserInput > 1 Then NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2) Application.EnableEvents = False Target = NewInput Application.EnableEvents = True End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Cells.Count = 1 Then If Target.Column = 1 And Target.Value "" Then Range("b1").Value = Target.Value End If End If End Sub
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False If Range("A1").Value = "True" Then Range("A2").Value = 5 Range("A3").Value = 6 Else End If Application.EnableEvents = True Exit Sub End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range) Dim sht As Worksheet Dim shtChild As Worksheet Dim lngRow As Long Dim intCol As Integer Dim strValue As String Dim Target As Range Dim rng As Range Application.ScreenUpdating = True Application.StatusBar = False Set sht = Sh............
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Row > 15 And Target.Column = 10 Then
Call time_start Else End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?
Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next fr = Range("a65536").End(xlUp).Row Set Rng = Range("a2" & ":n" & fr) If Intersect(Target, Rng) Is Nothing Then Exit Sub
I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.
I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.
I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:
Code: .Interior.Color = RGB(255,255,0)
, but any further I get stuck as it involves 'target addresses'
combine two Worksheet Change event macros into the one macro? The macros are listed below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler Dim rngDV As Range Dim lRow As Long Dim lCol As Long
[Code]...
exitHandler:
Application.EnableEvents = True End Sub Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("O:O")) Is Nothing Then Application.EnableEvents = False
I have the following code that should pop up a message when column E is left blank when "other" is typed into column D. But I cannot get it to work.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range, LastRow As Range Dim x As Integer If Target.Count > 1 Then Exit Sub Set rng = Range("F:F") If Intersect(Target, rng) Is Nothing Then Exit Sub If Target = "" Then For x = 1 To 5000 If Cells(x, 4).Value = "Other" And Cells(x, 5).Value = "" Then Answer = MsgBox("If other, please state", vbOKCancel, "CONFIRMATION") End If Next x End If End Sub
