I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then
If Target.Cells.CountLarge > 2 Then Exit Sub
Application.EnableEvents = False
Target.Value = UCase(Target)
end sub
The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line
Code: Worksheets("SAVED").Range("A" & l).Select
Code: Dim l As Long Application.ScreenUpdating = False l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0) Worksheets("SAVED").Activate 'ROSTER=== Worksheets("SAVED").Range("A" & l).Select Selection.Resize(1, 739).Offset(1, 2).Copy
This is my Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then Exit Sub Else
Do Something...... End If End If End If End Sub
when excution comes to this line If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
I'm trying to protect cells based on what's input in column E. Here's what I tried, but it doesn't work. It's giving me a "Type Mismatch" error on the word "Annuity" where it appears first.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName() On Error GoTo errhandler Sheets(1).Name = Sheets(1).range("d10") Exit Sub errhandler: MsgBox "sheet name is already exists" End Sub
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$p$5" Then Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>" End If End Sub
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean) Application. ScreenUpdating=False ' Cancel user prompted save procedure Cancel = True ' Code removed... changes some values and settings before saving ThisWorkbook.Save ' Code removed... return the original values and settings Application.ScreenUpdating=True End Sub
For some reason, the workbook is not being saved when the above code is executed. It seems the problem lies with "ThisWorkbook.Save"... in that it just isn't saving! If I delete "Cancel=True", the workbook will save (obviously!).
I have spent an hour trying to work this out and have come to the conclusion that it is something other than my code... has anyone experienced this problem before?
I'm using the following code in "ThisWorkbook" of a couple of different workbooks, and the problem occurs consistently with the code use regardless of which workbook...
Private Sub Workbook_BeforeClose(Cancel As Boolean) ActiveWorkbook.Close False End Sub
The code itself does exactly as it should (not save changes when closing), but shortly after the workbook has closed, any other open workbooks will freeze, then give a popup message saying an error has occurred and a log is being generated, and EXCEL shuts down (loosing any other work)...
I have searched my HDD and only found 4 .log files that reference dates that coincide with the errors, although the times don't match(?)...
Originally Posted by WinMgmt.log (Fri Oct 27 08:12:29 2006) : core is being shut down by WinMgmt.exe, it returned 0x0
Originally Posted by wmiadap.log (Fri Oct 27 08:17:54 2006) : Performance library winspool.drv will be ignored as it was previously disabled (WbemAdapStatus = -1).
Originally Posted by wbemcore.log (Fri Oct 27 08:47:10 2006) : Core physically unloaded!
Originally Posted by gotomon.log Log file started at Fri, 27 Oct 2006 08:17:46 Eastern Daylight Time 0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0x0 0:00:00 i: G2EnumPortsCore() buffer available:0 buffer needed:24 0:00:00 i: G2EnumPortsCore() -- leaving early -- 0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0xc55980 0:00:00 i: G2EnumPortsCore() buffer available:24 buffer needed:24 0:00:00 i: G2EnumPortsCore() -- leave --
I had been using;
Private Sub Workbook_BeforeClose(Cancel As Boolean) ActiveWorkbook.Save True End Sub
Which had the same error... when I changed it to Close, I thought it had been fixed, but it was just that the delay is longer before the freeze.
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
Have some code in the workbook open event, which when I run when the workbook is already open works fine, however when triggered when the workbook is actually opened it fails on the first line.
Code: Private Sub Workbook_Open() Dim lngLastRow As Long Dim ws1 As Worksheet Dim ws2 As Worksheet Dim ws3 As Worksheet Dim X As Long Dim Y As Long
'Define Worksheet
Set ws1 = Sheets("Sheet1") Set ws2 = Sheets("Sheet2") Set ws3 = Sheets("Sheet3") Sheets("Sheet1").Activate
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
I want to know if it is possible to have 2 workshhet change events for one sheet. Let me explain this. Presently I have one workshhet where if any value ie entered in column A automatically date and time is entered in column B. I can do this by using folloing code.
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
In a Worksheet On Change event I am trying to obtain a new value that the user has placed into a particular cell.
However, when I get to the line of code that reads the value in that particular cell, it is pulling the value that was in the cell prior to the change. When I view the sheet I can see the new value. When I do a debug.print or ? in the Immediate Window it shows the prior value.
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Row > 15 And Target.Column = 10 Then
Call time_start Else End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
I'm using a macro that picks up on changes in a active cell.. This is the code
HTML Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Application.Intersect(Target, Range("A:A")) Is Nothing Then If Target.Value <> "" Then
ThisWorkbook.Sheets("Log").Cells(Target.Row, 2).Formula = "=Today()" End If End If End Sub
There's a problem with this code, when select from a range and hit delete, i get a error mismatch. I want to have the macro ignore when i select active cell range of greater then 1.
Using Excel 2010. I have a ComboBox (Not ActiveX) on a worksheet
I'm trying to add an event so that when user click on a choice a macro is fired using the selected item as citeria for a filter When I click on the drop down and make a selection I receive this error msg:
Cannot find the macro "cboUserSelection_Change" The macro may not be available in this workbook or all macros may be disabled
I also tried _AfterUpdate - similar error message.
I added the Combo Box code to the Worksheet code, not a standard module
I was able to run a quick test macro so I do not believe "all macros are disabled"
I am trying to capture the value of a cell before a change even. The attached Macro will report the value before the change but does not store it so that I can use it in another module. What I am trying to do is capture the value before the change and then look that value up in another worksheet (in the same workbook) so I can make the same change in the second workbook.
The values will always be in Column B and will always be string characters.
The code I am using for the change event is as follows: ....
I have two worksheets, and when the value in one changes I'd like the value in the other to change as well. Pasting a link doesn't work, because on the "Paste to" sheet I've applied conditional formatting, and it doesn't register a change event when it's a pasted link. I tried running a macro to copy the whole column and paste it on a change event, but that didn't alert the conditional formatting to kick in.
The "Paste From" sheet has dropdowns in column C. The "Paste to" sheet has corresponding dropdowns in column F. So, if someone changes the selection in C3 on "Paste From", I'd like F3 on "Paste to" to change.