How to add high/low points to a line graph, similar to what sparklines have. The file I am using now doesn't allow me to add new columns of data, so I'm trying to figure something out that just updates dynamically using the data I already have in place.
This page has the thing I want to do, but it requires additional columns to be added to work, which I don't want:
Excel - Show High/Low Points on a Line Chart
I have the following chart that displays average speed for my bike rides (Green line). The problem is that I don't want the line going to points with no value or zero value. So, the first month would just be the point then, when I enter in an avg speed in Feb then the line would connect to Feb. Is this possible?
View 9 Replies View RelatedI have the following chart that displays average speed for my bike rides (Green line). The problem is that I don't want the line going to points with no value or zero value. So, the first month would just be the point then, when I enter in an avg speed in Feb then the line would connect to Feb. Is this possible?
View 9 Replies View Relatedhow to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
View 3 Replies View RelatedI have a 46000 rows of data. I want to make a chart, but only want to plot the highest and lowest data points in the data set. How do I get Excel to automatically find and plot only the highest and lowest data points?
View 9 Replies View RelatedI am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
I have an interesting problem (I hope you find it interesting too). I'm trying to find the historical "high" day of the week for a particular stock I follow. I searched for several hours but was honestly unable to make any progress. Normally I do my own formulas, so other than pasting a rare macro, that's pretty much the extent of my (lack of) experience, ie please assume I am a novice....
View 9 Replies View RelatedI am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI use data in column A:B to draw stacked line chart . My question: I want to add column C Evaluation on every point on stacked line chart.
Sheet1
*
A
B
C
1
*
Sales
evaluation
[Code] ...
I'm trying to write a macro that will format my chart data based on the corresponding cell value. I have the following code, which runs without error, but the formatting on data points doesn't change. I can't seem to get this to actually change the color of the data point in the chart.
Code:
Sub FormatChart()
Dim wb As Workbook
Dim ws As Worksheet
Dim wks As Worksheet
Dim y As Long
Dim j As Long
'this routine will format the charts on worksheets "SL11730" & "SL14100" 'so that data points equal to or above 98% will be green filled and 'all other points will be red filled
'set loop counter to two (contract (4100) & retail (1730))
j = 1
'start loop
Do Until j = 3
If j = 1 Then strwkb = "SL11730"
If j = 2 Then strwkb = "SL14100"
[code].....
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedIs there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
How do i conditionally colour chart data points. This is an example of my data from which the chart is created from.
Salesman A 10
Salesman B 10
US Total 20
Salesman C 20
Salesman D 10
Philipines Total 30
When the chart is created, i would like the country total data points to be in orange while the rest of the data points should remain in white. I tried this code and it returned me an error.
ActiveChart.SeriesCollection("Average of Margin").Points("ID Total").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
I also tried the online F1 help it told me to use Points(Index). However i do not want to refer to the ponint with an index as the number of salesman or country could change. Therefore changing the index points.
I have a VBA script that walks through the series of points on a chart and sets color based on other parameters unique to each point. Unfortunately, this doesn't see to work.
Running the following code, the .MarkerBackgroundColor and .MarkerForegroundColor commands seem to have no effect:
With myChtObj.Chart.SeriesCollection(1).Points(Counter)
.MarkerSize = 8
.MarkerStyle = xlDiamond
.Shadow = True
.MarkerBackgroundColor = RGB(250, 250, 250) ' These have no effect
.MarkerForegroundColor = RGB(0, 0, 0) ' These have no effect
.MarkerTransparency = 0
End With
Setting these parameters for the series as a whole does work, but not for individual points. Is this a known issue? Is this unique to the Mac version of Excel?
Attached is an excel file of my issue. I want to stretch the graph so it shows at least 3-4 months. at the moment is only shows 1 month.
Timeline format - Copy.xlsx
I have a macro that runs every 15 minutes and stores data into a table. This table is attached to a chart and auto updates with the new data every 15minutes. The table will house historical data over time, however I only want the chart to reflect the last 96 entries (15min data points over 24hours). So, once i have enough data my table will be A2:A97. When A98 is populated, i want the data in A2 to be removed from the chart only.
Here is a breakdown:
A2:A97 is currently displayed on the chart.
I enter new data into A98.
The chart will now display A3:A98.
I enter new data into A99.
The chart will now display A4:A99.
I enter new data into A100.
The chart will now display A5:A100.
and so on.
How I can accomplish this? Does this need to be done in VBA?
I have a time series chart ( dates on x axis , with the data values on y axis ). It is a line chart. So column A has the dates, and column B has the values. Both have length 100. Now, column C can be considered to be the "flag" column. If a cell in Column C has the flag set to true , then the corresponding date/data values in the chart needs to be highlighted or formatted differently
I tried playing around with conditional formatting of x-axis but could not make any progress. Do I need to create a new data series with the C column?
Also given that there are 100 date values, I dont want all x-axis points to be listed on the chart. I guess excel by default shows the date points as the user increases/decreases size. But I dont want the specifically formatted date points to be skipped .
Following my bosses recent charting attempts involving multicoloured backgrounds, graduated bars, textured boxes, mis-matched fonts etc, etc, which frankly showed no information whatever, I was asked to simplify them.
I did so, as in the two attachments, but the response is now along the lines of "well, yes, but they aren't very exciting, are they?"
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies View RelatedIn the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View RelatedI have a pareto chart(Bar & Cumulative Line Chart) that I would like to have the line orginate at x = 0 & y = 0 without changing the position of the other points on the line chart.
Basically this is for better visual appearance. When I add a 0 to the table, it skews the alignment of the line chart with the corresponding bar chart.
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
View 3 Replies View RelatedI have an Excel chart graphing two data records. As the data points cross, one is in "back" and one is in "front". I would like to reverse the current layout. Is this possible?
View 1 Replies View Relatedwould like the points in my scatter chart to be displayed
with the same font color that is in the Data cells being charted.
the cells for the scatter chart contain 2 font colors - red and blue
e.g.
Cell Cell
a2 is red b2 is red
a3 is blue b3 is blue
Background: I have a Chart sheet with a combination bar/line chart on it. Data is coming from a "datasheet". There is a combo box on the chart sheet that allows you to choose a specific office whose data you want to view. Pick an office from the dropdown and the chart changes. The data is a count of closed cases by month. The data sheet shows 22 Offices with their monthly data, along with entries for each month of the Upper Control Point, Lower Control Point and Mean based on the nationwide data for that month.
The chart itself uses bars to show the office's case count per month, and I've incorporated 3 additional data series to plot the UCP, LCP and Mean as lines for each month.
I'd like to change the color of the bars to be Blue, Green or Red depending on where they fall in the 3 lines. I sort of have it working, but I'm stuck.
The code below grabs the value of each series point and compares it to the 3 control points and does change the colors. I've figured out how to use the If, next to change from one series point to the next, but cannot figure out how to loop through each of the control points. As it stands now, it looks only at the first month's control point and uses that for each successive month.
I hope this is clear and I've tried to keep it as short as possible while still providing enough information.
Sub chartbarformat()
'
' chartbarformat Macro
' Macro recorded 5/15/2008 by vacoyoungd
'
Dim x As Integer
Dim val As Variant
Dim AveragePending As Range
Dim LowerPending As Range
Dim UpperPending As Range
I am trying to format the colors of the bubbles on my bubble chart to Green (>5), Yellow (4-5), or Red (<4) based on the value used to create the bubblesize.
The problem that I am having is that .BubbleSizes is property of type String, not range like .xValues, or .Values. So instead of pulling in the value, I am pulling in the reference and getting a "Type Mismatch" Error. The reference of my data for .BubbleSizes is $D$5:$D51. Each row is it's own series and the list is dynamic, so I need to be able to support future rows without a lot of maintenance.
Here is the code that I have so far.
VB:
Sub DataSeriesFormat()
'
' DataSeriesFormat Macro
' Format Data Series based on defined parameters for Green, Yellow, and Red. Created by Derek Steinmetz 7/24/12
'
Dim x As Integer
Dim val As Variant
Dim Green As Range
[Code] ......
Does anyone know if there's a way to color code points on a scatter chart based on their values in a "3rd dimension" (i.e. other than the 2 dimensions represented by the chart axes).
You might imagine a scatter chart that plots transactions by price (y) and units purchased (x).
In that scenario, it might also be nice to color code each point by the region that made the sale.
The only way I know to do this is to manually create separate columns of data for each region, so that each region can be plotted on the scatter chart as a separate data series.
But since I'd like to experiment with several color coding alternatives, I'm wondering if there isn't a simpler way...
For instance, Rob Bovey's "XY Chart Labeler" can add data point labels to a scatter chart...
Is there, perhaps, another add-in that might enable color coding of data points based on a 3rd set of values?
Conditional formatting is lacking. I need to colorize each data point on the graph according to a characteristic cell (not an x-axis or y-axis variable). I have done something similar by simply graphing a group of points as a series and changing the series color. I'm looking for a more graceful solution. From the example picture attached (i would attach a workbook, but the data is sensitive), a point is charted based on two variables and colorization is attempted based on the third variable. i would find the range of the third value, assign a gradient based on the spread, and colorize each point. My VBA syntax is lacking for chart functions
View 7 Replies View Related