Get Line In Graph To Become Curved Between 2 Data Points In 10 Point Chart?
Feb 21, 2014
how to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
View 3 Replies
ADVERTISEMENT
Jan 6, 2012
Ok, so here's the trick:
I know how to create combo or mixed graphs with line/bars on single axis, and secondary axis. I even know how to do mixed stacked and unstacked columnar charts...
But how do you depict in single view graph
a single bar (1 datapoint) with a single line (upper control limit e.g. target).?
And I don't want to to use shapes to draw the target line.
I want the target line to be automatically plotted by Excel...
View 9 Replies
View Related
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Jan 13, 2009
I have the following chart that displays average speed for my bike rides (Green line). The problem is that I don't want the line going to points with no value or zero value. So, the first month would just be the point then, when I enter in an avg speed in Feb then the line would connect to Feb. Is this possible?
View 9 Replies
View Related
Jan 13, 2009
I have the following chart that displays average speed for my bike rides (Green line). The problem is that I don't want the line going to points with no value or zero value. So, the first month would just be the point then, when I enter in an avg speed in Feb then the line would connect to Feb. Is this possible?
View 9 Replies
View Related
Jun 20, 2013
Showed a line chart using 2 vertical axis where the first was a single line along the graph (ie. 42%) then the second data series was a single data point that was above or below the line which easily showed if the result lied above or below the threshold.
How to get a straight line across the body of the just to be used as the theshold line?
View 1 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
Jan 27, 2010
finding a function/formula for determining the breaking point (Yvalue) in a graph, that doesn't necessarely equals the maximum value of that curve!
So the curve in the sample is a stress strain curve (tensile test) of a fibre and at the end it breaks and the Y value returns to 0. I would like to determine that Y value before it is 0, so the last Y value before it returns to zero.
I thought of a formula like:
display last y value before it drops with 90%...
but I don't have a clue how to write it in maths...
View 4 Replies
View Related
May 30, 2008
i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies
View Related
Aug 23, 2013
How to add high/low points to a line graph, similar to what sparklines have. The file I am using now doesn't allow me to add new columns of data, so I'm trying to figure something out that just updates dynamically using the data I already have in place.
This page has the thing I want to do, but it requires additional columns to be added to work, which I don't want:
Excel - Show High/Low Points on a Line Chart
View 2 Replies
View Related
Oct 26, 2009
I have created some charts for my work and one of them is a line chart that spreads across one year with values for each month. Well they want the graph to always show one month ahead of where we are out. So there is actuals in for Sep. but then the line graph drops all the way to 0 for Oct. I don't want to have the graph bottom out when there is a zero. Does anyone know how to fix this?
View 9 Replies
View Related
Jul 1, 2008
creating a graph / chart using Ms Excel? I've been trying to do it myself but to no luck as I'm just a novice Ms Excel user. I'm trying to create a bar graph and combine with line graph based on these data. kindly refers to my attachment image for an example of desire graph. For line graph, it should display individually based on the given data. These are my daily data and I want to have an analysis graph so that I could monitor my computer's usage and its efficiency.
Computers Data Usage
--------------------------
Computer01 10 50.00%
Computer02 691 68.89%
Computer03 107 81.03%
Computer04 190 81.25%
Computer05 2099 82.89%
Computer06 1247 50.88%
Computer07 2786 10.00%
Computer08 69 22.00%
Computer09 300 18.00%
Computer10 1829 87.07%
Computer11 746 27.43%
Computer12 437 91.33%
Computer13 301 62.50%
Computer14 24 40.00%
Computer15 93 83.33%
Computer16 192 92.45%
View 5 Replies
View Related
Sep 25, 2007
I need to map the names of the companies on the x axis (ANF, AEO, ARO, PSUN) and 5% to 30% on the y axis. Plotted for each company should be the min and max. So two points for each company. How can I plot this data. Underlying data as follows:
MINMAX
ANF18.6%19.8%
AEO7.8%21.0%
ARO6.2%9.0%
PSUN6.1%14.2%
View 3 Replies
View Related
Apr 15, 2014
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies
View Related
Mar 2, 2009
I have a set of data. I know how to do linear regression over the whole set of data. How do I have another linear regression over the first 5 points in the set of data on the same graph ?? I am using Excel 2007
View 14 Replies
View Related
Dec 30, 2008
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
View 2 Replies
View Related
Dec 29, 2011
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
View 1 Replies
View Related
Jul 9, 2014
I have a set of task descriptions that I am attempting to trend on. Some of these (Column B) have the customer's name added to the description; others do not. I need to be able to make a list of task names (ColumnA), removing the name from the text string.
The formula I am using is [=LEFT(B3,FIND("for",B3)-2)].
The problem I am having is when the description does not contain the "for" built into the formula, I get "VALUE" error. What adjustment can I make to the formula to pull over the Description if the "for" does not appear in the text string?
View 3 Replies
View Related
May 11, 2007
How do i conditionally colour chart data points. This is an example of my data from which the chart is created from.
Salesman A 10
Salesman B 10
US Total 20
Salesman C 20
Salesman D 10
Philipines Total 30
When the chart is created, i would like the country total data points to be in orange while the rest of the data points should remain in white. I tried this code and it returned me an error.
ActiveChart.SeriesCollection("Average of Margin").Points("ID Total").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
I also tried the online F1 help it told me to use Points(Index). However i do not want to refer to the ponint with an index as the number of salesman or country could change. Therefore changing the index points.
View 4 Replies
View Related
Nov 26, 2013
Attached is an excel file of my issue. I want to stretch the graph so it shows at least 3-4 months. at the moment is only shows 1 month.
Timeline format - Copy.xlsx
View 1 Replies
View Related
Jun 3, 2014
I have a macro that runs every 15 minutes and stores data into a table. This table is attached to a chart and auto updates with the new data every 15minutes. The table will house historical data over time, however I only want the chart to reflect the last 96 entries (15min data points over 24hours). So, once i have enough data my table will be A2:A97. When A98 is populated, i want the data in A2 to be removed from the chart only.
Here is a breakdown:
A2:A97 is currently displayed on the chart.
I enter new data into A98.
The chart will now display A3:A98.
I enter new data into A99.
The chart will now display A4:A99.
I enter new data into A100.
The chart will now display A5:A100.
and so on.
How I can accomplish this? Does this need to be done in VBA?
View 3 Replies
View Related
May 20, 2007
I have a time series chart ( dates on x axis , with the data values on y axis ). It is a line chart. So column A has the dates, and column B has the values. Both have length 100. Now, column C can be considered to be the "flag" column. If a cell in Column C has the flag set to true , then the corresponding date/data values in the chart needs to be highlighted or formatted differently
I tried playing around with conditional formatting of x-axis but could not make any progress. Do I need to create a new data series with the C column?
Also given that there are 100 date values, I dont want all x-axis points to be listed on the chart. I guess excel by default shows the date points as the user increases/decreases size. But I dont want the specifically formatted date points to be skipped .
View 5 Replies
View Related
Sep 11, 2007
Following my bosses recent charting attempts involving multicoloured backgrounds, graduated bars, textured boxes, mis-matched fonts etc, etc, which frankly showed no information whatever, I was asked to simplify them.
I did so, as in the two attachments, but the response is now along the lines of "well, yes, but they aren't very exciting, are they?"
View 4 Replies
View Related
Apr 24, 2007
I have a line graph that contains information for the following products,
Boats , Cars & Bikes.
The chart works well but i would like to show the numbered scale of each product & i can't work out if this is possible in excel.
Currently i can only get two data showing for the axis.
I would like to show all three & just use a color to indicate which data corresponds to which product.
In my attached example: I have data for both Cars (blue) & Bikes (green) but i would like to also show data for the graph scaling for Boats (pink).
View 4 Replies
View Related
Apr 14, 2008
I have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies
View Related
Apr 22, 2014
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
View 2 Replies
View Related
Oct 12, 2013
I have an Excel chart graphing two data records. As the data points cross, one is in "back" and one is in "front". I would like to reverse the current layout. Is this possible?
View 1 Replies
View Related
May 16, 2008
Background: I have a Chart sheet with a combination bar/line chart on it. Data is coming from a "datasheet". There is a combo box on the chart sheet that allows you to choose a specific office whose data you want to view. Pick an office from the dropdown and the chart changes. The data is a count of closed cases by month. The data sheet shows 22 Offices with their monthly data, along with entries for each month of the Upper Control Point, Lower Control Point and Mean based on the nationwide data for that month.
The chart itself uses bars to show the office's case count per month, and I've incorporated 3 additional data series to plot the UCP, LCP and Mean as lines for each month.
I'd like to change the color of the bars to be Blue, Green or Red depending on where they fall in the 3 lines. I sort of have it working, but I'm stuck.
The code below grabs the value of each series point and compares it to the 3 control points and does change the colors. I've figured out how to use the If, next to change from one series point to the next, but cannot figure out how to loop through each of the control points. As it stands now, it looks only at the first month's control point and uses that for each successive month.
I hope this is clear and I've tried to keep it as short as possible while still providing enough information.
Sub chartbarformat()
'
' chartbarformat Macro
' Macro recorded 5/15/2008 by vacoyoungd
'
Dim x As Integer
Dim val As Variant
Dim AveragePending As Range
Dim LowerPending As Range
Dim UpperPending As Range
View 8 Replies
View Related
Jan 13, 2014
I am reporting on the amount of certificates issued over a period of time. Basically the government stopped released data on the amount of one type of certificate being issued during this period and started releasing data on another type. I am having trouble displaying this other data which starts around half way into the time period. So all the data starts in June 2010... but this other data starts in June 2012.
View 3 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related