Adding Items Into ListBox With Comboboxes Even Combobox Is Empty
Mar 21, 2013
I have a list box in the userform. I would like to add items into ListBox which correspondent with 4 combo box values. If all combo boxes is selected, that would be easy task. However, user might not need to select all combo boxes. If any of the combo boxes empty, my code fails that end up listbox is empty. I could write the code with all of the combinations, but that will be my last choice if there is nothing easier than that. Can I adjust the code such as if the combo box="" then skip then look at the other combo box if that is "" than skip again. If all combos are "" add all the items from the source.
My code is below:
AllStaffLB is listbox
StaffSrchCB is combo box
StaffSrchCB2 is combo box
[Code]....
View 2 Replies
ADVERTISEMENT
May 9, 2008
The code for sorting a multi-column listbox in Retain Selection After Sorting ListBox was really good, and I've used it a lot in an application I'm building.
What I'm hoping to do is reload a listbox in such a way that the items appear in the same order they were previously in. I'll describe two scenarios:
1. User edits a record
- user sorts listbox
- user selects a record
- user edits record
- listbox reloads, unsorted
2. User adds a record
- user sorts a listbox and sees a record is missing
- user adds the missing record
- listbox reloads, unsorted
ideally the last step for each would be "listbox reloads, sorted" and the user would go on down the list. the tricky part i think is when rows are deleted or added.
i'm starting on a solution, but if there's some existing code that will do this i'd appreciate if someone could point me to it (because, for example, the listbox sorting code i referred to above anticipated things i did not).
View 9 Replies
View Related
Jul 29, 2009
In my excel sheet, from B2 to B20 i have datas like,
aaa
bbb
ccc
aaa
ccc
ddd
rrr
ttt
bbb
rrr
ttt
I want to add this to my combobox1 with out repeation as, 'aaa' should be listed in combobox once. What is the macro for this or we can do it in Combobox properties itself?
View 12 Replies
View Related
May 2, 2006
I've got a database and want to put the names that are in one culumn of the Worksheet into a combobox.
I use a Loop and the addItem procedure.
The thing is that there are many names that are the same, just diferent records for the same company...
How do i do that every name only appears once in the ComboBox.
View 3 Replies
View Related
Dec 3, 2011
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code:
Dim GL As Range
Dim ws1 As Worksheet
Set ws1 = Worksheets("Main")
For Each GL In ws1.Range("MainGL")
If IsEmpty(GL) Then
'do nothing
Else
ComboBox2.AddItem GL.Value
End If
Next GL
View 3 Replies
View Related
May 13, 2006
How do I add the column heads (e.g. A1, B1, C1....) as items to a combobox or listbox if they are not empty?
View 9 Replies
View Related
Jan 12, 2012
Adding items to combobox at run time
Setup office 2007 win xp pro ie8
Further to my post relating to swaping jpgs
The code below scans from the column on the row of the worksheet till it finds a blank, this seems to work ok as I previously had a msgbox in that displayed the value of n once the loop finished
So I was hoping that the values in the columns on that row would be added to the combobox but for some reason I get a typing missmatch error.
Code:
Dim n As Integer
n = 1
Do While LValue6 "" 'find out how many alternatives there are
LValue6 = FoundISBN.Offset(0, 32 + n).Value
n = n + 1
DataInput.ComboBox1(n) = LValue6 - I was hoping that the value in the cell was added to the combobox
Loop
View 4 Replies
View Related
Aug 31, 2006
I need to add about ~200 items to Combo From Other Excel File (with no duplcates).
How to make it.
Private Sub UserForm_Activate()
With cboComp
.addItem "item"
End With
End Sub
View 3 Replies
View Related
Jun 30, 2014
I have 2 combo boxes dependent on one combo box. When I select an item from the dropdown list in ComboBox1, I want the corresponding data attached to ComboBox1 to be available in ComboBox 2 and ComboBox3.
Example:
ComboBox1 ComboBox2 ComboBox3
John Male English
Data for ComboBox1 are in column A2 (Names), data for ComboBox2 are in column B2 (Gender) and data for ComboBox3 are in column C2 (Language spoken).
I chanced upon a code written by royUK from this Excel Forum, which works well for 2 ComboBoxes. This is the code:
Option Explicit
Dim rSource As Range
Private Sub ComboBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
[Code].....
View 2 Replies
View Related
May 3, 2009
I have a userform with many comboboxes and textboxes and I am using the following code to empty those controls:
View 9 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Dec 7, 2007
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
View 3 Replies
View Related
Aug 13, 2012
I'm coding a userform where there are some comboxes which are popolated by values coming from Sheet2. Up to now I work it out (maybe its not elegant but it works).
Now I would like that when the user selects one combobox the values of the other comboboxes are set accordingly to the grid in Sheet2.
Please download the XLS file at: [URL]....
View 2 Replies
View Related
Feb 15, 2014
I am currently using the following code to populate two list boxes (lbUnitList, and lbPOList) on a userform:
How can I get the items in the lbUnitList to show in alphabetical order based on the data in Column 1?
View 4 Replies
View Related
Sep 17, 2009
I have a Listbox with a varying number of items in the list.
90% of the time the user will select all the items in the list.
Is there a way to have all the items preselected?
Then the remaining 10% can unselect.
View 3 Replies
View Related
May 19, 2012
How can I move an item in a Listbox up or down. This is how the listbox is populated:
Code:
Private Sub UserForm_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
[Code].....
View 9 Replies
View Related
Oct 1, 2013
I have 2 list boxes on a from with data in each list. I've been able to get items to move from listbox1 to listbox2, but I want the item to be deleted from listbox1 once it's moved...and vice versa. Here is the code I'm using. .
Private Sub DeleteButton_Click()
If ListBox2.ListIndex = -1 Then Exit Sub
If Not cbDuplicates Then
[Code]....
View 5 Replies
View Related
Nov 6, 2013
I'm trying to create a module that will take selections from an activeX Listbox on a Sheet called Setup and transfer them to another sheet called Lists. On the Lists sheet, I want to store the selected items in cell L2 and down. So for example, if there were 4 items selected from the Listbox, cells L2:L5 would be populated with those values.
View 1 Replies
View Related
Sep 27, 2009
I can't seem to get my listbox to deselect an item. When the user clicks on a day of the week in the listbox, they are given a yes/no option to print the sheets for the day selected. If they select no and change their mind, they cannot click on the same day of the week without first cancelling the listbox and re-opening it.
Private Sub UserForm_Initialize()
Dim myarray As Variant
myarray = Split("Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday", "|")
ListBox1.List = myarray
End Sub
Private Sub ListBox1_Click()
Call PrintRoutine(ListBox1.Value)
End Sub....................
View 9 Replies
View Related
Oct 18, 2007
I have a list of items across 4 rows. It is a single select, not a multi-select list.
Row 1 is a Unique ID (1 to nth), Row 2 is a description, Row 3 is a Number Value for one requirement and Row 4 is a number value for another requirement. I have a listbox which captures the range and displays the data in a multi-column format. I want the user to have the ability to move records up or down in the order. I know you can do this for individual items in a colum using list index, but list index does not like to capture rows.
View 3 Replies
View Related
Mar 13, 2009
The below code shows the way I add items to 10 different comboboxes. However, the items to be added are actual the same.
Is there a way I can simiply it? I am worry that by the end of day, i might have up to 50-60 comboboxes and the code will be a relativity long and not efficient.
Taking into consideration the the comboboxes will be labelled as Jieyi_task_ComboBox1...to 10
jane_task_ComboBox1...to 10
Kenny_task_ComboBox1.. to 10
View 8 Replies
View Related
Apr 25, 2014
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
View 3 Replies
View Related
Jun 18, 2014
I can get this to display in my listbox however when I add a new line to the range it won't refresh the list unless I reload the form it is on. I am also looking to see if it is possible to sort a list when it is displayed in this fashion.
[Code] ....
View 1 Replies
View Related
Sep 25, 2013
I have a Listbox1 in which I was able to populate it with unique items (from column B in Programs worksheet) using a collection (that was a good achievement for me!)
Now, I want to populate a the Listbox2 with items (not repeated) from column C, BUT only if the correspondent value on column B is equal to listbox1.value.
[Code] .....
View 4 Replies
View Related
Feb 27, 2014
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
View 2 Replies
View Related
Mar 4, 2014
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
View 3 Replies
View Related
Oct 14, 2009
Why is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
View 4 Replies
View Related
Dec 14, 2009
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
View 10 Replies
View Related
Sep 30, 2013
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies
View Related
Jan 24, 2014
Code:
Dim flag As Boolean
Private Sub UserForm_Initialize()
Dim myWorksheet As Worksheet
flag = True
[Code] ........
I made a user form that, with the click of an item in the listbox (which is populated with the worksheet names), will show or hide the matching worksheet. I was using indices, but a problem occurs when there are some hidden sheets to begin with, because the listbox is filled with only the visible worksheets (that's part of the functionality required) and so, when there are hidden worksheets the indices of the listbox are totally different. So, to avoid that kind of bugs I thought I'd use the sheet + listbox names to show/hide the worksheets, but that is proving to be a very hard task.
How I can use the listbox item names + worksheet names to make the "mapping" correctly?
View 5 Replies
View Related
