Filling Comboboxes Based On Value Of One Combobox?
Jun 30, 2014
I have 2 combo boxes dependent on one combo box. When I select an item from the dropdown list in ComboBox1, I want the corresponding data attached to ComboBox1 to be available in ComboBox 2 and ComboBox3.
ComboBox1 ComboBox2 ComboBox3
John Male English
Data for ComboBox1 are in column A2 (Names), data for ComboBox2 are in column B2 (Gender) and data for ComboBox3 are in column C2 (Language spoken).
I chanced upon a code written by royUK from this Excel Forum, which works well for 2 ComboBoxes. This is the code:
Dim rSource As Range
Private Sub ComboBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
I'm trying to fill some combo boxes on a userform with arrays stored as variant type (this is how I was told it's done). The problem is, I'm using exactly the same code in two subroutines and it works in one and not in the other. I have a button to reset the form and a subroutine that runs when the form is initialized. Here's the code for the reset button which works:
At the moment I've got the 'Journeys' and 'TimeArray' declared as public variables for maximum scope, so that they can be used by both subroutines. But I've also tried declaring them localy in each subroutine and it still doesn't work! By using a breakpoint I can see that the line
Code: carJourneysSaved.List = Journeys
is definitely running when I expect it to but the combo boxes remain blank unless I click reset!
I have a list box in the userform. I would like to add items into ListBox which correspondent with 4 combo box values. If all combo boxes is selected, that would be easy task. However, user might not need to select all combo boxes. If any of the combo boxes empty, my code fails that end up listbox is empty. I could write the code with all of the combinations, but that will be my last choice if there is nothing easier than that. Can I adjust the code such as if the combo box="" then skip then look at the other combo box if that is "" than skip again. If all combos are "" add all the items from the source.
My code is below:
AllStaffLB is listbox StaffSrchCB is combo box StaffSrchCB2 is combo box
I am currently trying to add some functionality to an Excel workbook and I have a combo box that I am unable to get the values to populate. On the same worksheet I have a command button. Here is the code I am using to attempt to populate the combo box:
Private Sub cmdSendSave_Click()
Private Sub bxLocation_Change()
With bxLocation .AddItem "Mt. Hope" .AddItem "Summersville" .AddItem "Huntington" .AddItem "Pulaski" .AddItem "Coastal Bend" .AddItem "Odessa" .AddItem "Wheeling" .AddItem "Hollywood" End With
I'm starting a dashboard, where on the front page I have two combo boxes on the left, and three empty fields to the right. I'd like the three fields to the right to auto-populate table-based values depending on the chosen criteria from BOTH fields (by store and month/date). I've attached a sample of what I've got so far. I've only provided three tables for this example, and I have a table with the same column/row titles for each metric and I have three different metrics I'd like to auto populate: COGs, Sales, and GM% or in the example, metric 1, metric 2, metric 3. No pattern in the table values, just wanted to populate the fields quickly. All fields are organized by store/month-date and I've set up a link to my combo boxes on a calculations tab.
I have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.
I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.
Basically, I need the textbox to look at spreadsheet 1 and count the number of times a name occurs in a column given a certain week.
ComboBox3 has the name in it,ComboBox4 has week number
So when I press CommandButton1, the script will look at the week, find all instances in that week, rows, look at the name, then count the number of times the name comes up that week. and return that number to TextBox1.
I am trying to auto-fill a column based on certain criteria - in other words, fill in blank cells based on a cell above, just a little more complex version. I have added an attachment to give everyone a visual of what I am describing and then maybe this explanation will make a little more sense.
First, if you open the attachment, the left hand side is a small example of what I have. The middle is the condition. And the right hand side is what I'd like to see happene.
In the example, I am matching up a time and when I hit that time, I am adding on a certain number of miles per hours based on the condition and the cell above. Meanwhile, I am filling in the blank cells with the condition until the condition changes. So a cell is incremented based on the condition and gets its value from the cell above.
I have an excel sheet with 2 tabs. 1st tab provides the data for downtime of a manufacturing line. The last column (shift) is blank and needs to be filled based in shift schedule in tab2
On the 2nd tab I have the shift schedule, which tell which shift is working on particular days
Month Date 7:00am- 7:00 pm 7:00pm - 7.00am
Feb 1 Shift A Shift C
Is it possible to write a macros that will look at the Date and time from tab 1 and assign the correct shift number in the shift column. For example the 1st row of tab 1 reads (Month=Feb, Date = 3:55:59 AM) so according to shift schedule it would fill C shift.
I have lots of data and to assign every event to shift # manually is not possible. So i wanted to know if there is a macros i can use to make life easier and learn at the same time
A/B/C/D/E/F/G/H/I/J/K April 2008 / August 2008/Jan/Feb/Mar/Apr/May/Jun/Jul/Aug/Sept/Oct....
How can I get excel to fill in a constant number say '3' automatically based on the date range in column A and B. For example, in this case Since the date range is from April to August how can I get excel to automatically fill in 3 for apr/may/jun/jul/aug
I have a column of data (Column T) which has about 10 different words in it (varieties of fruit). What I want to achieve is based on the data in column T I want to fill Column U with information, let me put it in an example.
Column T has the following words in 2000 rows. Thompson, Crimson, Sable, Superior, Midnight, Ralli.
If Cell T4 for example has 'Thompson' or 'Superior' I want cell U4 to say 'white', but if cell T4 has 'Crimson' or 'Ralli' I want it to say 'Red'. If it has Midnight I want it to say 'black'.
I think this can be done using a vlookup maybe? I don't have to go down 2000 rows to fill this information in.
I want to make things easier for myself when filling in my worksheets by having certain cells autofill based on a product number.
So I have my main worksheet and I have my product information sheet. When I type in the product number in cell 13C, I want it to auto fill cell 13B with the product name which is located in collumn A on the product info sheet, but dependent upon that product number. Collumn B in my product info sheet has all of the product numbers. From there I would need 13G on my main worksheet to fill in with Collumn D from the product sheet, but again dependent upon that product number.
There are more that need to fill yet, but I can figure out what to do once I have a starting point with the above I believe.
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I have a document to track funding and would like to be able to auto-populate individual task sheets within the workbook based on a task drop-down. So if I choose Safety from the "Task Area" drop down it would auto populate the full row from the Master Sheet to the Safety Sheet. I have uploaded my document so you can better understand.
i would like to create a vba that will populate based on the comboboxes value
like this code
Code: 'for cmb1 'if cmb1 = major 1 then 'if range"F4" is empty then 'copy sheet1 range"A5:R5" to sheet2 range"F4" 'if cmb1 = major 2 then 'if range"F4" is empty then 'copy sheet1 range"A16:R16" to sheet2 range"F4"
I have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
Private Sub cmdbTest_Click() z = "dep" Call TestSub(z) z = "loc" Call TestSub(z)
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics: Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.