I would like to add a pause to the following macro so that it inserts the word CANCEL 1 second after triggering. I know I need to use the Application.Ontime function but cannot work out how to integrate it.
Code:
Sub Cancel() Application.ScreenUpdating = False
Sheets("Sheet1").Range("T5") = "CANCEL"
Application.ScreenUpdating = True
End Sub
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
I am trying to pause a macro on a protected sheet, select 2 adjacent cells (initially protected), utilize an existing drop down box to select a name from the list, copy the name from the list into the range of cells, then re-start the macro.
I had no problem when there was just one name (see John Smith below). I tried to use the InputBox command but needed to actually type in the name.
ActiveSheet.Unprotect
Range("C27:D27").Select
'ActiveCell.FormulaR1C1 = "John Smith"
' Application.CutCopyMode = False
' ActiveSheet.Paste
'Range("c27:d27") = InputBox("Enter value")
is there a code i can have where i can a pause a macro and then run it after 10 mins from that point?
View 5 Replies View RelatedI am running a macro that populates the same chart with variable data. I have approximately 40 sets of data and wish to pause or stop the macro to view one of the sets of data more closely. The pause option would be better but Stop option is acceptable
View 2 Replies View RelatedIs there any way to automatically add two new rows after every existing row containing data?
For example
1 A B C
2 D E F
3 G H I
turn into
1 A B C
(empty row)
(empty row)
2 D E F
(empty row)
(empty row)
3 G H I
I have macros that often pause for the user to take some action -- for instance, to confirm that the correct cells are selected, or to delete something. Usually I use the "Stop" command, which opens the VBA editor; when I finish doing the manual action, I just resume the macro.
When writing macros for actual users, I'd like to do the same thing without their having to deal with the VBA window. Is there a way to pause and resume action and remain in the Excel window?
I've written a macro for work that will work with our billing process. After part of it has run, I'd like to pause it for the user to check a column for errors and possibly update a table to get rid of those errors, then after those errors are fixed, have the ability to continue with the rest of the code. I tried to make a message box to remind the user to look for the errors, but it wouldn't allow me to click anywhere except for on the buttons.
View 4 Replies View RelatedIs there a way a macro can be paused then resume running the macro by a keystroke, not a time delay.
View 3 Replies View RelatedI'm recording a Macro but I want to test certain section before I complete it, so can I pause the recording and then restart the recording again?
View 9 Replies View RelatedI have a workbook with several hundred row the VBA code loops through. It takes about an hour to run all the calculations. Whenever I need to pause the script I hit ESC, which works well for me, but for other users it would be nice to have a command button that halts code. Even better would be another button to resume code.
View 9 Replies View RelatedI am running a Showcase query from inside excel. I want the query to update, drop the data in excel save it and then close. The problem is that the save command is executing before the data is dropped. The Wait command pauses all processes so it won't work. Is there a way to have a minute of filler until the data is dropped so it will save?
View 5 Replies View Relatedhow to interrupt VBA code, allow user modifications to a chart, and then continue the code where it left off with a click of a button. I currently have the code in place where a UserForm pops up at a specific point and tells the user to make adjustments and press OK when done. It works fine but the UserForm displays and the macro resumes when OK is clicked, but I can't figure out how to activate the chart or the spreadsheet to allow editing while that UserForm is on the screen. If only I can get excel to allow me to sleect the spreadsheet and make changes while the UserForm is on the screen, I would be set. Can anyone please help me with any options to allow editing while the UserForm is on the screen so I can edit and then click the OK when done?
I posted something similar to this over two years ago. The way I got around it at the time was to break the code into two separate subs. This time around, the code is making 17 graphs and I want to ask for editing for each one before continuing. That would be a lot of individual sections of code.
adding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
I want to add a number to existing set of numbers.
E.g. 10035-TSZ651-MT0A01-42004314-F01-023
and i want to add 0 to 023 so that the number will be
10035-TSZ651-MT0A01-42004314-F01-0023.
What I missed. I already added the MS VBA Extensibility 5.3 on a VBA Reference. but still got an error.
Line1: Dim objForm as object
Line2: Set objForm = ThisWorkbook.VBProject.VBComponents("UserForm1").Designer
Line3: Set Butn = objForm.Controls.Add("Forms.CommandButton.1")
The error is on Line3, "Runtime Error '91': Object Variable or With block variable not set".
I am wanting to pause a macro to allow a user to select a cell and when the user hits enter the macro starts running again. My intention is that a user would select cell B5 or B8 or B55 and then hit enter and the cell would move 6 cells right and enter a value from the macro. The following is what I have tried and even though it allows to select a cell, it doesn't make that cell the active cell.
[Code].....
I would like to Pause a macro to allow the user to select a range on the spreadsheet and then click OK to continue with Macro.
I tried to use Msbbox, but I can't figure out how to allow user to access the spreadsheet to highlight the desired range.
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
I have a spreadsheet of over 8000 addresses. I have the street, state and zip but not the cities.
Is there a way I can do a search and mass import of cities from a website, like USPS? I'd like to know if there is something I can do quickly rather than manually look each zip code up and enter it in one by one.
In the attached workbook I have 3 sheets. The first 2 with the names starting with WO are individual sheets based on a single scaffold rental. The "Standing Equipment" worksheet is adding the components from the other two worksheets. Easy enough, but I am looking for either a formula or some VBA guidance on how to have the "Standing Equipment" worksheet automatically change it's formulas to incorporate new worksheets as they are either added or deleted, thus avoiding constant formula editing as scaffolds are erected or dismantled.
View 3 Replies View RelatedI'm currently doing a new worksheet for work
Cell's A1: Commission Per Sale Cell B1 Running total of commission
I would like the running total to continuously incorporate all of the above commissions and this has to be in the column next to the new sales commission.
E.g.
Commission $5 $7 $9
Running Total $5 $12 $21
I run the following formula down a column of records in row AR
=IF(COUNTIF(lookup!A:A,N2)>0, "Exclude", "Not In Lookup")
I want to add to this formula an additional function that if any cells in column A1 are blank, then do not perform the remainder of the equation.
I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
In a workbook made in Excel 2003, I have the following for a UserForm:
Private Sub UserForm_Activate
Me.Calendar1.Value = Date
End Sub
I copied this workbook to a computer with Excel 2007 and it bombs out at "Date"
It comes up with a compile error, "Can't find project or library"
In the references window (Tools, References) it has the "Missing: Ref Edit Control" checked and the location at the bottom of this window states "C:Program FilesMicrosoft OfficeOffice11REFEDIT.DLL".
The reference to Office11 is from the computer with Office 2003 as the computer with Office 2007 has Office12.
There is another "Ref Edit Control" in the References window and when I check it and browse to the Office12 folder, highlight REFEDIT.Dll and click on open and in the references window on OK it comes up with "Name conflicts with existing module, project or object library". I have tried to delete the "Missing: Ref Edit Control", change the priority and change the reference in the missing control to Office12 but all to no avail.
How can I change the reference to the Ref Edit Control from Office11 to Office12?
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedI have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
I have a data input worksheet, which uses the following code to fill in the missing zeros when cells are empty.
View 10 Replies View RelatedI would like to change an existing Macro……i.e. the current date……which is ,,,,,CNTRL +; …… I want to make it CNTRL + e………..I tried to make my own by running a new macro……but obviously I am doing something bass ackwards…..I tried to look up the current one……that is CNTRL + ; and see how they did it……but couldn’t find that either
View 2 Replies View Related