I'm currently doing a new worksheet for work
Cell's A1: Commission Per Sale Cell B1 Running total of commission
I would like the running total to continuously incorporate all of the above commissions and this has to be in the column next to the new sales commission.
E.g.
Commission $5 $7 $9
Running Total $5 $12 $21
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
I run the following formula down a column of records in row AR
=IF(COUNTIF(lookup!A:A,N2)>0, "Exclude", "Not In Lookup")
I want to add to this formula an additional function that if any cells in column A1 are blank, then do not perform the remainder of the equation.
I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
Is there any way to automatically add two new rows after every existing row containing data?
For example
1 A B C
2 D E F
3 G H I
turn into
1 A B C
(empty row)
(empty row)
2 D E F
(empty row)
(empty row)
3 G H I
adding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
I want to add a number to existing set of numbers.
E.g. 10035-TSZ651-MT0A01-42004314-F01-023
and i want to add 0 to 023 so that the number will be
10035-TSZ651-MT0A01-42004314-F01-0023.
I would like to add a pause to the following macro so that it inserts the word CANCEL 1 second after triggering. I know I need to use the Application.Ontime function but cannot work out how to integrate it.
Code:
Sub Cancel() Application.ScreenUpdating = False
Sheets("Sheet1").Range("T5") = "CANCEL"
Application.ScreenUpdating = True
End Sub
What I missed. I already added the MS VBA Extensibility 5.3 on a VBA Reference. but still got an error.
Line1: Dim objForm as object
Line2: Set objForm = ThisWorkbook.VBProject.VBComponents("UserForm1").Designer
Line3: Set Butn = objForm.Controls.Add("Forms.CommandButton.1")
The error is on Line3, "Runtime Error '91': Object Variable or With block variable not set".
I have a spreadsheet of over 8000 addresses. I have the street, state and zip but not the cities.
Is there a way I can do a search and mass import of cities from a website, like USPS? I'd like to know if there is something I can do quickly rather than manually look each zip code up and enter it in one by one.
In the attached workbook I have 3 sheets. The first 2 with the names starting with WO are individual sheets based on a single scaffold rental. The "Standing Equipment" worksheet is adding the components from the other two worksheets. Easy enough, but I am looking for either a formula or some VBA guidance on how to have the "Standing Equipment" worksheet automatically change it's formulas to incorporate new worksheets as they are either added or deleted, thus avoiding constant formula editing as scaffolds are erected or dismantled.
View 3 Replies View RelatedI am trying to apply named cell from another worksheet to existing formula.
For example I have a formula in sheet2 which looks like =sheet1!A1+sheet1!B1. I then subsequently name sheet1!A1 = Jan and sheet1!B1 = Feb. Thinking that if I apply these names the formula in sheet2 would look like =Jan+Feb. However I get the message "Microsoft Office Excel cannot find any references to replace" when I try to apply the names using Excel menu "Insert - Name - Apply".
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
In a workbook made in Excel 2003, I have the following for a UserForm:
Private Sub UserForm_Activate
Me.Calendar1.Value = Date
End Sub
I copied this workbook to a computer with Excel 2007 and it bombs out at "Date"
It comes up with a compile error, "Can't find project or library"
In the references window (Tools, References) it has the "Missing: Ref Edit Control" checked and the location at the bottom of this window states "C:Program FilesMicrosoft OfficeOffice11REFEDIT.DLL".
The reference to Office11 is from the computer with Office 2003 as the computer with Office 2007 has Office12.
There is another "Ref Edit Control" in the References window and when I check it and browse to the Office12 folder, highlight REFEDIT.Dll and click on open and in the references window on OK it comes up with "Name conflicts with existing module, project or object library". I have tried to delete the "Missing: Ref Edit Control", change the priority and change the reference in the missing control to Office12 but all to no avail.
How can I change the reference to the Ref Edit Control from Office11 to Office12?
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedI have a list of numbers in column A (i.e.: 1234)and I need them to show up in column B in with an "*" asterisk on each side on the number (i.e.: *1234*). So I was using "=a1" in cell B1, is there away to add the asterisk to the formula as text?
View 6 Replies View RelatedI want to do a basic formula for a poker account to work out my P/L.
I have two sheets. The first sheet will record my P/L and the second sheet records deposits and withdrawals.
When I input a figure into Sheet 1, Cell A1, I want it to then be able to add to this figure the total that is in Sheet 2, Cell A1. Is this possible? This way the figure that I input into Sheet1, Cell A1 will give me the profit/loss after taking into account any deposits/withdrawals.
ie If in Sheet2, Cell A1 I have a deposit of -500. When I type into Sheet1, Cell A1, a figure of 800, it will then change to 300. It will add 800 less 500 = 300.
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies View RelatedIm trying to develop a formula that sequentially numbers in column a depending on if there is a value in column B
We have documents at work that have alot of text with random spacing between that needs a sequential reference number so would like the formula to be able to look at the value in column b and if its not blank add a number . I would like this number to be the previous cell above + 1
the formula ive started looks something like =if(B10""), ???????,""
can not get excel to reference cell the last cell above with data.
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
I am having difficulty expressing a formula so that if a cell is greater than zero, it adds the value of that cell to a String figure. I have got as far as the following, the 'problem' area is in red.
Sub Share_Sales3()
Dim Prompt As String
Dim Caption As String
[Code].....
Suppose there are two ranges
rngA = range("A1:B5") ' The cells that change
rngB = range("D1:E5") ' The results
Assume that based on an iterative lookup process the values in rngA change. After each iteration the values from rngA are determined and placed into rngB (this i can do). Each time rngA changes i need those values to be added to the previous rngA values (otherwise the values being stored in rngB).
The loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]
View 2 Replies View RelatedIn my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
I currently use the following formula: =workday(H21,H23,J20:J34) which calculates my date based the date entered in cell H21. While testing I realized that I needed to add another variable to the formula for a specific scenario. When my Date in H21 is less than todays date I require another workday formula to be calculated. How can I add this if statement to the existing formula?
View 2 Replies View RelatedI'm trying to add either a new condition to a formula or modify existing formula, so blank cells can't be taken as a number like 0 Here is the formula =IF(N14>0,1,0)
***This is what I do with formulas with similar problems =IF(COUNT(Y14,A14)=2,Y14/A14*100,"")
unfortunately the above condition its already a condition by itself so I don't know what to do whether to modify condition or add a new condition which I don't know how to do.
I'm looking to have my stopwatch run continuously until "and only until" a command button ("Stop") is clicked. I already have a code and stopwatch in place. I have 5 command buttons: start (starts the timer), call (activates/hyperlinks to another sheet where I have more command buttons and data entry needed/), stop (stops the timer), reset (resets the timer), and record (stamps the elapsed time on the sheet1).
They work great BUT the problem is, when the cell is touched (i.e. when you type a character or double click on any cell even if it's on a different sheet, or even on a different workbook) the timer stops!
I'd think that all this would require just a simple string/line inserted in my code. I'm really, really new to VBA and doesn't know how to write my own codes yet. I have to google what I need every time and do trial and error! Just to give you more info-- I'm using this for a call simulation program, in which the user is an operator taking in a call. She would have to be aware of how much time have passed after performing some actions/data entry on the different sheets on the workbook. I hope I've explained it enough. :D Anyway's here's the code I got, which I think needs just a few edits.
I have a series of data in 2 columns...say A and B...that I want to concatinate into a string of data...i.e A1&A2&B1&B2&C1&C2 etc etc....
Can I include this in a macro so that it will continue to concatinate the data until it gets to the end of the list (i.e a blank cell) ?
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
I am currently trying to sum up values every day of the week. (salaries )
That means I have a sheet called Salary where I have the entire year mapped out pr. day. Like you see underneath:
Date
30/12/13 0
31/12/13 0
01/01/130
02/01/130
03/01/130
04/01/130
05/01/130
etc.
In another sheet called Overview, I have another column divided into weeks, like this:
Date
30/12/12 0
06/01/13 0
13/01/13 0
20/01/13 0
27/01/13 0
Now what I need to do is, take the 7 days in a week in the first sheet, and summarize it in the first week in the overview sheet. Now that is simple the first time, =SUM(Salary!C1:C7)
But how do I drag down and automize it so that the next row becomes =SUM(Salary!C8:C14) instead of =SUM(Salary!C2:C8)?
So basically I need to autofill with intervals of 7 (the 7 days in the week) on every row in my Overview sheet.