Adding A Not To Exceed Condition To Existing Formula?
Mar 10, 2014
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
Cell's A1: Commission Per Sale Cell B1 Running total of commission
I would like the running total to continuously incorporate all of the above commissions and this has to be in the column next to the new sales commission.
I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
I have this formula in my spreadsheet =IF(ISBLANK(B2), "", C1+1). I need to add a "dash T" to this formula so it shows up in every cell. How and where do i write that into a formula?
I have a simple formula in a cell, just a sum of some columns. (=C6+H6) If the sum happens to be greater than 10, though, I want it to show as the number 10. How can I do this?
I would like to add a pause to the following macro so that it inserts the word CANCEL 1 second after triggering. I know I need to use the Application.Ontime function but cannot work out how to integrate it.
Code: Sub Cancel() Application.ScreenUpdating = False Sheets("Sheet1").Range("T5") = "CANCEL" Application.ScreenUpdating = True End Sub
What I missed. I already added the MS VBA Extensibility 5.3 on a VBA Reference. but still got an error.
Line1: Dim objForm as object Line2: Set objForm = ThisWorkbook.VBProject.VBComponents("UserForm1").Designer Line3: Set Butn = objForm.Controls.Add("Forms.CommandButton.1")
The error is on Line3, "Runtime Error '91': Object Variable or With block variable not set".
I have a spreadsheet of over 8000 addresses. I have the street, state and zip but not the cities.
Is there a way I can do a search and mass import of cities from a website, like USPS? I'd like to know if there is something I can do quickly rather than manually look each zip code up and enter it in one by one.
In the attached workbook I have 3 sheets. The first 2 with the names starting with WO are individual sheets based on a single scaffold rental. The "Standing Equipment" worksheet is adding the components from the other two worksheets. Easy enough, but I am looking for either a formula or some VBA guidance on how to have the "Standing Equipment" worksheet automatically change it's formulas to incorporate new worksheets as they are either added or deleted, thus avoiding constant formula editing as scaffolds are erected or dismantled.
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code: Public Sub CopyData() Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9) Set ws = Sheets("Sheet2") For bi = 1 To 9
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
In a workbook made in Excel 2003, I have the following for a UserForm:
Private Sub UserForm_Activate Me.Calendar1.Value = Date End Sub
I copied this workbook to a computer with Excel 2007 and it bombs out at "Date" It comes up with a compile error, "Can't find project or library"
In the references window (Tools, References) it has the "Missing: Ref Edit Control" checked and the location at the bottom of this window states "C:Program FilesMicrosoft OfficeOffice11REFEDIT.DLL".
The reference to Office11 is from the computer with Office 2003 as the computer with Office 2007 has Office12.
There is another "Ref Edit Control" in the References window and when I check it and browse to the Office12 folder, highlight REFEDIT.Dll and click on open and in the references window on OK it comes up with "Name conflicts with existing module, project or object library". I have tried to delete the "Missing: Ref Edit Control", change the priority and change the reference in the missing control to Office12 but all to no avail.
How can I change the reference to the Ref Edit Control from Office11 to Office12?
I have a range of values lets say in cell A1 to A5. In A7 is where I want to formula to the maximum value but if it exceed 100000 then only show 100000. I am trying to find out if it possible not to use the If Function to achieve the same result.
I'm currently using the following function: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000") which works perfectly. However I'd like to add another condition "between 1000 and 2000".
I've tried this but I'm not getting any luck: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],AND("<1000",">2000")).
I have a code that searches in a column for a certain value, if it finds it, it copies this value to a range adjacent to it.
[Code] ..........
However, if the cell where the code is supposed to find a new value is blank it makes the range blank. But in that case, I wan't it to leave the range cells with their original value.
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
Title: How do I add a condition to an IF and Vlookup Formula:
I need to edit a formula to include a condition. I attached an excel file for ease of explaining the problem. I want to say if $E$5 has A to B then F5 will automatically have BOR, but if E5 has anything else then the Vlookup formula applies.
I was thinking something along this formula: =IF(AND($E$5<>A to B,ISBLANK($B5),"",VLOOKUP($B5,'Drop Down'!$D$1:$E$500,2,FALSE)))
I know I need to add BOR in the formula above somewhere Where am I going wrong?
I have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
I am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
