Aligning Autoshape In The Center Of Cell

Jul 2, 2013

Any way to vertically and horizontally center an autoshape in a cell without VBA. I created a shape and placed it in a cell but don't think it is centered. Also, if I add shapes to adjacent cells, I would want them all to be centered directly in the middle of the cells they are in. Using the align feature only seems to make sure the shapes are aligned to each other but doesn't seem to put them in the center of their respective cells.

View 1 Replies


ADVERTISEMENT

Excel 2010 :: Text Aligning Just Slightly To The Left Of Center

Dec 10, 2012

My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.

When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.

View 5 Replies View Related

Draw Line From Center Of Cell To Center Of Another

Aug 13, 2008

Following is what I want to do:

Draw a line from the center of the first cell to the center of another cell.

View 3 Replies View Related

Chanage Autoshape Colour According To Autoshape Colour In Another Worksheet

Oct 23, 2008

I am trying to automatically change the colour of an oval in worksheet1 to the colour of oval3 in worksheet 2.

Currently oval3 (Worksheet 2) has the a vba code that changes its colour when you click on it.

View 9 Replies View Related

Finding The Cell References Of Autoshape ...

Aug 15, 2007

I have a sheet that contains several autoshape objects. What I need to do is find all the cell addresses & then format the same cell addresses on another sheet with a solid colour. So for instance if my first autoshape is in Sheet1!A8, I need to fill say red or blue the same cell on sheet 2 ...

View 7 Replies View Related

Change Colour Of Autoshape Based On Cell Value

Mar 21, 2012

I've seen examples of VBA that will colour autoshapes based on cell values. I have a map of the UK made up of autoshapes that have been edited to create a shape of each postcode area such as EX, GL, NR etc. Also I have a list of all these postcode areas and I have given them a zone number (1-7) depending where in the UK they are.

PcodeZoneDH3DL3DN2DT1DY2E4EC4EH5

At the moment I have set the colours using the fill option so anything that is a particular zone is a certain colour (i.e. zone 2 is green).

What I would like to do is to set a zone to a colour, so the map will update all the zones with the right colours.

I need to be able to read the zone number that is assigned to a postcode area and change the relevant autoshape to the correct colour so that any postcode area can be one of 7 colours.

I can't attach a spreadsheet with my map and postcodes otherwise I would have.

Is there an easy way i can read the zone number of each postcode area in the list and update that autoshapes colour? Would the autshape need to have a name so it know which one to update or is this not possible?

View 9 Replies View Related

Dynamic Hyperlink In Autoshape Based On Cell Value?

Jun 7, 2014

I have created an employee schedule with 26 pay periods. Each pay period has its' own worksheet for scheduling employees.

To navigate to the worksheets I created a home page on one of the worksheets and would like to create an AutoShape for navigating with a hyperlink based on the pay period which is selected in cell B3. When the autoshape is clicked the user would go to the correct pay period worksheet.

For example Home Page:

Cell B3 contains drop down list of the 26 pay periods which the user selects the proper pay period (ie. 8Jun14-21Jun14)
Cell E3 is a cell reference on the sheet A1
Cell B6 contains hyperlink formula =HYPERLINK("#"&"'" & B3 & "'!" & E3)
Autoshape has formula =B6

When I click on the autoshape the hyperlink does not work.

View 2 Replies View Related

Link Autoshape/textbox To Cell Content

Jul 7, 2006

Let's say I place a rectagle/textbox on a worksheet. If I select it and go to the formula bar and write =A1 the content of cell A1 will be displayed in the rectangle (and of course if i change the content of A1 cell, the content of the rectangle/textbox will be updated). How can I do this from a VBA macro? How can I link the content of a rectangle/textbox to a cell?

View 2 Replies View Related

Center Image In The Middle Of Cell Where Cell Size Is Variable

Apr 12, 2013

The idea is to center an image in the middle of a cell where the cell's size is variable. This shall be done for a column of images if a certain cell in the same row contains content different from 0. If not the image shall be invisible.

Sub Center()Dim Position As Integer
Dim Picture As Integer
Picture = 6
For Position = 7 To 320If Sheets("List of Measures").Cells(Position, 2).Value

[Code] ......

Run-time error 1004: Application-defined or object-defined error?

View 7 Replies View Related

Align Text Center In A Cell Using VBA

Aug 14, 2007

I have the following code,

i would like to select columns A:W and center the text

Private Sub Workbook_NewSheet(ByVal Sh As Object)
Sh.Range("A1") = "W/O"
Sh.Range("B1") = "CUSTOMER"
Sh.Range("C1") = "DETAILS"
Sh.Range("D1") = "CUST PART NO"
Sh.Range("E1") = "STATUS"
Sh.Range("F1") = "NOTES"
Sh.Range("G1") = "DEPARTMENT"
Sh.Range("H1") = "DATE"
Sh.Range("I1") = "CUST ORDER NO"
Sh.Range("J1") = "DEL NO"
Sh.Range("K1") = "QTY"
Sh.Range("L1") = "SALE PRICE"
Sh.Range("M1") = "CARRIAGE OUT"
Sh.Range("N1") = "TOTAL SALES"
Sh.Range("O1") = "INT CODE"
Sh.Range("P1") = "SUPPLIER"
Sh.Range("Q1") = "COST PRICE"
Sh.Range("R1") = "CARRIAGE IN"
Sh.Range("S1") = "TOTAL HRS"
Sh.Range("T1") = "LABOUR COST".......................

View 9 Replies View Related

How To Select Cell A1 After Zoom / Center Macro

Mar 2, 2012

I'm having to run at low resolution on a sheet currently, so I'm using a zoom/center routine to make the dropdown lists visible for selections.

Issue I have is how do I select cell A1 after my error handling and exit routine properly. I couldn't get it to work without trying to select cell A1 before I would make a dropdown list selection. For now I am just running a separate macro to select a1 tied to a pushbutton as a temp fix. Code is attached.

Code:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim lZoom As Long
Dim lZoomDV As Long
Dim lDVType As Long
lZoom = 57

[Code] .............

View 2 Replies View Related

VBA - Copy Images In Specific Cell Paste And Center It

Aug 11, 2013

I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.

Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?

These codes are in a for loop.

Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight

View 3 Replies View Related

AutoShape Won't Go Away?

Apr 21, 2013

I have a range of cells that, when ever I try to click on, bring up the AutoShape rectangle. I don't know how I managed to turn this off, but I'd love to know how to turn it off.

View 4 Replies View Related

Hiding An Autoshape

May 14, 2008

Seems like this should be pretty cut-n-dry to me...I thought I could "hide" an Autoshape (AutoShape 19) using some formula [I.E. =IF(B12="","",SUM(C37:C45)) ] but I cannot get it to work...

Basically I dont want to see the shape if there is no data D49.

View 9 Replies View Related

Export An Autoshape As A Gif

Aug 4, 2006

I want to save an autoshape as a .gif file and then reference it to an image box in my excel spread sheet. I can't seem to do this through excel or using VBA code.

View 8 Replies View Related

Remove Autoshape Line

Jul 1, 2008

I have a shared document I created. In has been in use for 4 months with no problems. This last month, 3 other individuals not very cognizant with Excel were using the document. One of these individuals placed a 'line' in the document. It appears that they used Autoshapes to draw the line.

I want to remove the line they have drawn. It sounds like a simple problem, but I've tried:

* Edit, Clear, All
* Edit, Cut
*Right Click the 'line', Format AutoShape, under Colors and Lines, change Line Color to No Line
* Delete a series of rows with the line in the middle row,

Everything I’ve tried to eliminate this line is not working and this is very frustrating. This type of 'line formatting' is rampant in the department and has appeared in multiple documents, which I've had to recreate.

I'm not sure what they did, so I'm not sure how to correct this issue. I'm presuming they used AutoShapes. There are two small white circles - above and below the line. And a small green circle above the top white circle that has circular arrows surround it....perhaps a rotate feature.

View 9 Replies View Related

Locking Autoshape Position

Dec 7, 2009

Can I lock an autoshapes position relative to the screen size?

i.e. I have a disclaimer that appears at the bottom of my screen in the middle, however when the workbook is sent to another user and their monitor has different aspect ratio's the autoshape is positioned a couple of inches from the bottom of the screen.

I have looked at locking to cell references but this has the same effect.

View 9 Replies View Related

Colour Change Autoshape

Mar 29, 2007

I have been trying to make it so that an autoshape changes colour according to the value of a particular cell but every time I run the macro the shape is black and I cannot work out why. The code is -

Private Sub CommandButton1_Click()
Dim X As Integer
X = Range("H5").Value
With Sheets("Sheet 1").Shapes("Rectangle 1").Select
Select Case X
Case Is > 0:
Selection.ShapeRange.Fill.ForeColor.RGB = 2
Case Is < 0:
Selection.ShapeRange.Fill.ForeColor.RGB = 3
Case Else:
Selection.ShapeRange.Fill.ForeColor.RGB = 1
End Select
End With
UserForm2.Hide
End Sub

View 6 Replies View Related

AutoShape Name That Ran Macro Code

Apr 3, 2008

I have a large map of a region with which I want to create autoshapes to allow certain areas to be zoomed into. So far i have made an autoshape, assigned a macro, and used

ActiveWindow.Zoom = True

To zoom into it. At least that is the theory. What I have discovered is that this only works when a shape is selected, which does not occur when you click on it. Is there a way to get the name of the autoshape being clicked, so that i may select it within the macro and zoom in on it. Or is there a better way of doing this? I am trying to avoid making explicit macros for each autoshape as I will have many of them by the time this is complete.

View 2 Replies View Related

Aligning Columns With Same Data?

Feb 22, 2007

How do I sort out columns aligning them to match data in another column?

Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.

EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL[code].....

View 8 Replies View Related

Aligning Across Multiple Columns?

Feb 27, 2013

I have a spreadsheet with an example attached. There is data in multiple rows across multiple columns but not all rows and columns have info in every cell. I would like all the information to align to the far left column but stay in their respective columns.

View 7 Replies View Related

Aligning Data According To 2 Columns?

Apr 30, 2013

aligning some data. Cupno has more entries than seqno and there are duplicate entries. I cannot think of a way to get seqno+results to align with cups. If it's possible to delete rows the don't have a corresponding seqno thats ok too. I've attached the example workbook. Sheet1 is the data and Sheet2 contains what ideally the results should look like

View 2 Replies View Related

Aligning Text File In VBA

Mar 20, 2014

My application is in vba and I want to log information in text file which required four columns. The tool should open the log file and log the issue and close the file immediately so that other processes running in parallel could also post the issues to it without loss of data. Keep appending to the log file.

Log file should look like: LogFile.txt

View 9 Replies View Related

Aligning Data By Date

Dec 31, 2008

Column A contains the date, every day since 1/2/07 to present
Column B contains a value for that date
Column D has dates within the range in Column A but at odd days (e.g. 4/2/07, 10/2/07)
Column E has data which corresponds to the date in Column D.

Can anyone advise of a formula which can allow me to put the data in Column E in line with the dates on column A rather than the dates in column D?

I want to have in Column C values from Column E that match with the dates in Column A, so for example next to 1/2/07 the cell would be empty but next to 4/2/07 in column A would be the value corresponding with that date in columns D & E.

View 9 Replies View Related

Aligning Columns With Same Data

Feb 22, 2007

How do I sort out columns aligning them to match data in another column?

For instance.

Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.

EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL
TXEZ061244.........TXEZ061101..........ERNIE...............TX
TXEZ061101.........FLEZ059314..........JASON...............FL
FLEZ054336.........TXEZ064240.........ERNIE................FL
TXEZ063075........TXEZ059503.........MICHEAL............TX
FLEZ060652.........TXEZ059027.........CLAIRE...............TX
FLEZ-054341........TXEZ059063.........CLAIRE...............TX
TXEZ060723.........TXEZ059164.........PAUL..................FL
TXEZ059503
FLEZ059314
TXEZ059164
TXEZ059129
TXEZ059063
TXEZ059051
TXEZ059027

I need it too look like this:

Column B Column C Column D Column E
FLEZ054246..........FLEZ054246...........ERNIE................FL
TXEZ061411
TXEZ061244.........TXEZ061244.........WCG..................TX
TXEZ061101.........TXEZ061101.........ERNIE.................TX
FLEZ054336
TXEZ063075
FLEZ060652
FLEZ-054341
TXEZ060723
TXEZ059503.........TXEZ059503.........MICHEAL............TX
FLEZ059314..........FLEZ059314.........JASON...............FL
TXEZ059164.........TXEZ059164.........PAUL.................FL
TXEZ059129.........TXEZ059129.........DOUGLAS...........FL
TXEZ059063.........TXEZ059063.........CLAIRE..............TX
TXEZ059051
TXEZ059027.........TXEZ059027.........CLAIRE..............TX

View 6 Replies View Related

VBA Autoshape Arrows To Show Performance

Oct 2, 2008

Morning all. I'm trying to use VBA to generate autoshape arrows to track changes in values.

Something allong the lines of Column B (Jans data) C (Febs Data) E (autoshape arrow, green up, for improvement, or red downwards for a worsening).

The problem I'm having is postioning my autoshapes. The only way I can do it at present is to keep all columns and rows a standard width, and position using multiples of those.

Is there anyway to set the autoshape to the cell height and width, and position it within the boundries of the cell? This way I don't have to worry about rewiting my code every time I change a cell width?

View 7 Replies View Related

Placing AutoShape Text Into A Variable?

Mar 28, 2013

If you know the autoshape number, it is easy to retrieve any caption text but is there a way to retrieve the text from any autoshape without knowing its number.

Dim ASText As String
ActiveSheet.Shapes("AutoShape 43").Select
ASText = Selection.Characters.Text

This will place the text in AutoShape 43 into variable ASText.

I need the code to get the text from any autoshape I click on reguardless of what its number is.

I use a lot of autoshapes on a worksheet as command buttons. Sometimes, the macro code is identical for many buttons with the exception of what the autoshapes text is. This text is the variable the macro needs. It would alow me to use one macro instead of sometimes 30 or more.

View 7 Replies View Related

Limit Number Of Characters In Autoshape

Sep 28, 2009

I am using a diamond shape that is copied into the active sheet when the user runs a macro. The user then selects the shape and enters some text. I want to limit the characters to a certain number or at least be able to give the user some advice when they enter too many characters.

I have found that, as long as I have manually named the shape "Diamond1", I can get the count in my immediate window with the following:


?ActiveSheet.Shapes("Diamond1").TextFrame.Characters.Count

but I want the count to relate to the active shape. So I tried:

?selection.shapeRange.TextFrame.Characters.Count

and I get a "runtime error 438 Object doesn't support this property or method".

How should I count the characters in the selected shape, and then if it is over say 12, require the user to shorten it or at least present yield a message Box?

View 9 Replies View Related

Hide/unhide Autoshape Object

Jun 20, 2007

I have drawn an arrow on a worksheet using the Autoshape menu on the Drawing Toolbar. Now I'd like to write some code that will hide this arrow (make it not visible). Later on in my code the arrow should become visible again. The idea is that users will not see this arrow untill certain actions have been performed.

View 2 Replies View Related

Financial Data - Graph Not Aligning

Jan 18, 2014

I work on graphics which show financial data. The base is day data together with calculated added values the graphic worked and showed good pictures.

But now I encountered a problem with the graph - related to not listed days, points are "generated" which do not be in line with the rest of the data !?

EXCEL_Forum_20140118.jpg

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved