Allow Hide & Unhide Column/Rows On Protected Sheet

Sep 25, 2007

I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.

View 2 Replies


Hide / Unhide Columns On Protected Sheet

Feb 20, 2008

When my spreadsheet opens it automatically protects the sheets using the following

With Sheet1
.Protect Password:=SpreadsheetPassword, UserInterfaceOnly:=True
.EnableOutlining = True
End With

and I use the following to hide the column if the toggle button on my form is 'true'. The problem is it gives an error if the sheet is protected. it worksfine without protection.

If ToggleButton1.Value = True Then
Range("column_calories").EntireColumn.Hidden = True
Range("column_calories").EntireColumn.Hidden = False
End If

View 7 Replies View Related

VBA Hide / Unhide Rows On Other Sheet?

Jun 18, 2014


Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Sheet2")
Select Case Target.Address(False, False)
Case "B12"[code].....

I need to change it so that it hides a range of rows, say (6:26) instead of adding a line of code for each of the rows from 6 to 26 that I want to hide

Also how can I go about hiding the same rows on 5 more sheets, can I add more sheetnames after "Sheet2"?

View 3 Replies View Related

Listbox Macro To Hide / Unhide Rows In Different Sheet

Jun 27, 2014

In the attached abbreviated example, what should the second line in each of the three macros read to direct the hiding/unhiding of rows in the adjacent sheet? Right now I'm trying a If/Then configuration but it's not working. I was able to figure this out using grouped check boxes but a list box should be graphically "cleaner" and hopefully simpler in coding. The original table list is hidden in column "A", if that is important. I could use a combo box but the menu list is short and I think the list box approach will be simpler.... If there is a way to combine the three macros into one.

View 2 Replies View Related

Hide And Unhide Column And Rows Using Checkbox In Excel?

Jan 28, 2013

How can i hide and unhide column and rows using checkbox in the excel.

detail price qty amount
chair 1000 1 1000

some time i just want to see only the amount or some time i want to see the qty, how can i hide and unhide row or Column

View 1 Replies View Related

Hide/Unhide Rows Meeting Condition In Column

Aug 22, 2008

In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.

So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.

I have some hide code that I created in the file as well.

Sub NotCurrentHide() ...

View 5 Replies View Related

How Do You Allow Hide/unhide Or Group/ungroup Features While Protected

Dec 20, 2007

We have a file that needs to be updated monthly by running macros, but the macros are being blocked by protection. I would like to put some code at the start of the macro that unlocks all sheets and then at the end locks them up again. Actually, all I really need is a macro to do just that unlock all sheets, and then another one that locks them back up again as we will need to lock and unlock at various times and it is annoying to have to do it by sheet ....

View 14 Replies View Related

Unhide Rows - Spreadsheet Not Protected

May 24, 2014

I've a few rows that are hidden, and I cannot unhide them using the unhide function. The spreadsheet is not protected. What can I do?

View 5 Replies View Related

Hide / Unhide Certain Rows

Apr 3, 2014

I highlighted a selection of rows and clicked HIDE, now I want to unhide certain rows and when I highlight the rows above and below and right click - unhide nothing happens. I need to Unhide to find something.

View 2 Replies View Related

Hide And Unhide Sheet According To A1 Value?

Apr 11, 2014

i want to hide my sheet if A1.value = 0(zero) and if unhide the sheet if A1.value = greater than 0(zero)

View 11 Replies View Related

Hide / Unhide Section Of Rows

Apr 3, 2014

I have a button that I want to hide/unhide a section of rows.

This is the code a have so far:

[Code] .....

So I've named a a section of rows "rngHideRows". I've tried to use the command .Range("rngHideRows").EntireRow.Hidden = True (and viariants of this) but nothing I try works.

View 7 Replies View Related

Hide/unhide Rows With Zero Values

Jun 19, 2007

Need a macro which will hide rows having 0 values. On running once it will hide those rows having 0 values and on pressing second time it will unhide those hidden rows and so on.

View 14 Replies View Related

Hide Or Unhide Rows With Using Checkbox

Mar 7, 2009

I need to hide / unhide some rows in a sheet with the help of a activex checkbox... I want remove, let's say row 20:24 and row 34 with one checkbox.

View 6 Replies View Related

Hide, Unhide Rows And Count!?

Apr 2, 2009

I have a code that will hide all rows that have a "-" in Colum A, leaving me with the useful data.

However, this data is pulled from a front sheet that has data added to it.

What I would like my code to do is to relook at all the hidden cells, and if their value has changed from "-" to what ever the data may be then to unhide that row, displaying the data.

The code I'm using currently is: ....

View 10 Replies View Related

Hide/Unhide Rows From Name In List Box

Jan 11, 2010

I have a list box on a worksheet that contains the following names: field, vessel, pipe, structural. I would like to be able to unhide certain rows based
on the name shown in the list box. For example, if I choose field it would
unhide rows 3 thru 12, if i choose vessel it would unhide rows 13 thru 20, so on so forth. If nothing is choosen in the list box then rows stays hidden.

View 9 Replies View Related

Hide/unhide Rows Using Checkbox

Jan 20, 2010

i'm newbie here. i need to hide & unhide rows using checkbox in excel but i stuck. i write these simple code and it doesn't work at all. my bad..

View 2 Replies View Related

VBA - Hide / Unhide Multiple Rows

Oct 26, 2011

I have a workbook with multiple tabs. Each tab has about 600 rows. In each tab, I need to hide/unhide rows based on the value of a particular column in that row. For example,

Row1: 10,7.89,John,TRUE
Row2: 16,9.08,Ram,FALSE
Row3: 98,8.09,Joseph,FALSE
Row4: 76,1.23,Harry,TRUE

Using the 4th column (that has either TRUE or FALSE), I need to hide entire row. I am using a loop on the range and hiding each row. But it is taking about 4 minutes for each tab to loop through the 600 rows and hide/unhide the required rows. Is there a faster way to achieve this? Following is my code.

Sub Toggle_Rows()
Dim Cell As Range
Application.ScreenUpdating = False
For Each Cell In Range("D1:D600")
If UCase(Cell.Value) = "TRUE" Then
Cell.EntireRow.Hidden = Not Cell.EntireRow.Hidden
End If
Application.ScreenUpdating = True
End Sub

View 1 Replies View Related

Hide / Unhide Rows With No Data

Sep 21, 2012

I think this is fairly straight forward but my limited VBA skills have me going round in circles. I would like to have a button that hides and unhides rows where Column L has blank values but only from row 80 to 200 only. I would also like the button text to change from "Hide rows" to "Unhide Rows".

From Row 80 to 100 hide rows where there is no value in column LButton should be clickable to hide rows and then clickable to unhidebutton text changes.

View 2 Replies View Related

Hide / Unhide Blank Rows With VBA

Nov 20, 2013

I am struggling to come up with a vba code that allows me to search column B, Rows 21:89 for blanks then hide/unhide the associated row. I would like it to be one macro so that I don't have to have two buttons on the sheet to hide/unhide.

View 5 Replies View Related

Toggle Hide/Unhide Rows

Jun 13, 2007

I have a macro that works fine with just numbers as a test run when I use it in the desired workbook/worksheets (where the values are returned via Indedx/match functions) there appears to be a small problem. (Below is the relevant post.)


Background is that I load raw data into a monthly account sheet which has the appropriate cost centre codes for allocating expenses.

I then use a vlookup in combination with indirect to place the summary data by costcentre code into annual worksheet.

I then have a summary sheet for printing purposes so I can print out a single month expenses by code to staple to the appropiate monthly costcentre statement. This is done by using Index & match functions looking at the annual summary sheet

What seems to be happening is that the code is sometimes recognizing formulas as a value & therefore showing zero values when I want only values 0 (as I sometimes have minus values).

Also sometimes when I go to unhide the all the rows it also is recognising some formulas as having value.

I am using Xl 2003.

View 9 Replies View Related

Auto Hide/Unhide Rows

Dec 15, 2008

I'm using this VBA code which is hiding cells in rows 59:111. Some of these cells have formulas and some don't.

Private Sub Hide_Unhide()
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
For i = 59 To 111
Rows(i).Hidden = (Cells(i, "b").Value = 0) + (Cells(i, "b").Value = "")
Next i
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
Here is the problem I'm running into: I want this to run in the background so the user won't have to click anything to hide/unhide the cells whenever the options in the drop down list are changed and the data expands/collapses.

View 9 Replies View Related

Hide/unhide Rows With Buttons

Sep 14, 2009

I am using several toggle buttons to hide/show rows of data related to the specific toggle buttons. I also want to hide and show the toggle buttons as well. When I try to do that the data underneath the toggle buttons is hidden but the toggle buttons don't hide with the cells.

A solution for the problem that I am having would be to have the ability to click on a cell as if it were a toggle button and hide/show rows of data when clicked.


If there is a way to hide/show buttons as well would work too.

View 9 Replies View Related

Hide/Unhide Rows With Checkbox

Nov 11, 2009

I've had luck with hiding rows with a checkbox, but I cannot get them to unhide when I uncheck the box.

Here's my scenario - (using Excel 2000) In an estimating spreadsheet I have a print range of A1:N74. What I'd like to do is add a checkbox or button so I can hide and unhide rows based on a null or zero in column range b5:b62. This is for printing purposes, but I can't get a 'beforeprint' event to work either. All I need is box checked and cells hide, box unchecked and cells show (unhide).

Sub CheckBox1_Click()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("B5:B62")
For Each MyCell In Rng
If MyCell.Value = "" Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub

View 9 Replies View Related

Hide Unhide Rows Via Macro

Feb 26, 2010

I have a workbook that has 500 rows. In order to be able to print the spreadsheet, I have added a Macro in that hides any rows that have a "0" in the A column. I then put an if/then formula (ex. if(isblank(A5),0) so that if the cell was blank and 0 would be there and therefore the row would be hidden.

The problem now is that I want a new row to become unhidden everytime the row above has data in it. So, if row 5 gets data put into it, row 6 would become unhidden. The problem I'm running into is that the data in column A is peoples names, and therefore each row will have a different name (i.e. different data).

1. Is there a macro to do this?

2. (This may be a really stupid question, but...) Can you run 2 macros in the same sheet?

View 9 Replies View Related

Hide & Unhide Button On Top Of Sheet ?

Feb 9, 2009

I want to hide & unhide columns using only (plus minus) button which is appearing on top of current sheet. I have couple of files with that options built in, but I dont know how to do it. I tried to see macros but appears that there is no macros at all in that file??

View 3 Replies View Related

Hide / Unhide Excel Rows As Per Answer

Sep 21, 2013

I am trying to hide unhide excel rows based on the answer in "A1". Row 2 to 10 shall be unhide if answer is "Yes" and it shall be hidden if answer is no.....

[Code] ......

View 1 Replies View Related

How To Hide/unhide Rows Based On Cell Value

Jun 17, 2009

I'm using column A as a reference. My data starts in cell A3.

Whenever theres a zero in any cell in column A I would like that row to hide.
If the row was hidden and the value changes to any number greater than zero I need the row to unhide.

I can record two macros for the hide/unhide part of this but I dont understand how to run them based on cell value.

View 14 Replies View Related

Toggle Button To Hide/unhide Rows

Jun 12, 2007

I have a command button that hides rows based on zero value in Col B then a 2nd btn to unhide those rows. The challenge is that as I want this code for several workbooks that will have data of varying row lengths & not all the zero values will be in the exact same place for each workbook or each month. Having done a little research on the Board (& googled) I have not found an answer to my challenge. So I am sure someone will point me in the right direction -

Private Sub CommandButton1_Click()
BeginRow = 3
EndRow = ActiveSheet.UsedRange.Rows.Count
ChkCol = 2
Range("B3:B" & EndRow).EntireRow.Hidden = True

For RowCnt = BeginRow To EndRow
If Cells(RowCnt, ChkCol).Value 0 Then
Cells(RowCnt, ChkCol).EntireRow.Hidden = False
End If
Next RowCnt

View 2 Replies View Related

Hide/Unhide Rows Based On 1 Cell

Jul 3, 2007

I'm trying to find a way to hide rows based on a condition in one cell.

Basically I have a pull-down list with Yes or No in it. I want to hide rows 52 through 57, if No is selected, and make the rows reappear if Yes is selected.

View 9 Replies View Related

Hide/Unhide Shapes Along With Rows/cells

Aug 18, 2009

I have an workbook with many sheets. each sheet contains loads of checkboxes, dropdowns, option buttons, groupboxes ... and they are created using a macro when the workbook is opened. all this works fine. Now I've grouped different rows based on their level of importance. Here's the glitch. whenever I select a group level, the rows get hidden, but not the shapes & objects present on them. Instead, they just jump to the row above or below and overlap the other shapes.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved