How can i hide and unhide column and rows using checkbox in the excel.
detail price qty amount
chair 1000 1 1000
some time i just want to see only the amount or some time i want to see the qty, how can i hide and unhide row or Column
I need to hide / unhide some rows in a sheet with the help of a activex checkbox... I want remove, let's say row 20:24 and row 34 with one checkbox.
View 6 Replies View Relatedi'm newbie here. i need to hide & unhide rows using checkbox in excel but i stuck. i write these simple code and it doesn't work at all. my bad..
View 2 Replies View RelatedI've had luck with hiding rows with a checkbox, but I cannot get them to unhide when I uncheck the box.
Here's my scenario - (using Excel 2000) In an estimating spreadsheet I have a print range of A1:N74. What I'd like to do is add a checkbox or button so I can hide and unhide rows based on a null or zero in column range b5:b62. This is for printing purposes, but I can't get a 'beforeprint' event to work either. All I need is box checked and cells hide, box unchecked and cells show (unhide).
Sub CheckBox1_Click()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("B5:B62")
For Each MyCell In Rng
If MyCell.Value = "" Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub
I want the option of printing my form with and without a certain column. I need to hide a column when CheckBox.value=True and unhide a column when CheckBox.value=False
I keep getting errors:
Block If without End IF
End If without Block If
Else without If, when I use an else for the second If statement
Private Sub CheckBox1_Click()
Dim DescriptionCell As Range
Set DescriptionCell = ActiveSheet.Range("B:B")
If CheckBox1.Value = True Then
With DescriptionCell
.EntireColumn.Hidden = True
If CheckBox1.Value = False Then
With DescriptionCell
.EntireColumn.Hidden = False
End With
End Sub
I need a VBA code that will when used with a Form Control "Check Box" will unhide / hide a row. To be more exact, I'm needind the code to "Hide" row 34 when unchecked and "Unhide" the same row when checked. I'm using Excel 2010.
View 9 Replies View RelatedI need to work with the run times for some equipment. This is just hours and minutes and I get the raw data as like "Pump # 1 - 35:30". This is not date/time data per se, just a raw number of hours. I thought I would format the cells as hh:mm and for 15:00 I would just enter 15 to save time. No go, that becomes 1/15/00 00:00 and displays as 00:00. I discovered that if I just leave the formatting as general and enter 15:00 it works fine and displays right but the formula bar says 3:00 PM (Excel figured to format it hh:mm). When I enter 30:00 it again seems fine but the formula bar says Excel stores it as 1/1/00 6:00:00 AM (Excel figured to format it [h]:mm:ss but I deleted the seconds).
I can just set the formatting as [h]:mm to be consistent and enter the full 15:00 but I guess that after working that out I am just curious - can Excel store hours:minutes as just hours:minutes without turning it into a meaningless date? And without converting it to a decimal number? I don't want to total 1:30 + 1:45 = 3.25; I want the total to be 3:15. Again, it appears that [h]:mm will do what I need but it just seems unelegant to me that it is stored as some weird date and I wonder if it will cause a problem at any point.
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
I want to create a check box which will hide/unhide a given row depending on if selected or not.
I can create a macro to hide or unhide the row, but I can't figure out how to do both depending on whether the check box is selected or not.
I am having difficulties with this one. I have a button on my worksheet (sheet1) that runs a macro.
View 4 Replies View RelatedI am trying to have a checkbox that will hide any row between 6 and 300 say IF column P of that row that is empty, or does not contain the letter "Y", whichever is easier. I have found a bunch of different code snippets, but most hide a predetermined row range, and I need this to be dynamic.
If it can also expand the range automatically as I add more rows to the spreadsheet, that would be even better, but not necessarily required.
I am trying to hide unhide excel rows based on the answer in "A1". Row 2 to 10 shall be unhide if answer is "Yes" and it shall be hidden if answer is no.....
[Code] ......
in my work sheet I need to Hide & Unhide some text box By checking a checkbox it means if user mark the check box the text box will be appear & if uncheck it the text box will be hidden
View 11 Replies View RelatedI would like to keep the current macros that I have and add the following:
A macros that can link the check boxes with the corresponding categories and rows in the other two sheets. If the box is checked the corresponding rows in the other sheets should appear.
I have color matched the check boxes with the rows on the two other sheets I would like to be linked up with.
I am trying to make an excel toggle button and am stumped. I am trying to create a toggle button that hides the entire row if it finds a 0 in a preset range that I am calling "Alpha". I have tried this code but it's not working.
Code:
Private Sub ToggleButton1_Click()
If ToggleButton1.Value = True Then
For Each cell In Range("Alpha")
[Code].....
In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
Sub NotCurrentHide() ...
I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; http://www.ozgrid.com/Excel/outlining-protected.htm. How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.
View 2 Replies View RelatedI currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
I have a sheet in excel 2013
In column "Y" I want to add a checkBoxs activeX from cell 6 until cell 500
I don't want to repeat it 500 times )":
This is my code for a single checkBox
[Code] ...........
I highlighted a selection of rows and clicked HIDE, now I want to unhide certain rows and when I highlight the rows above and below and right click - unhide nothing happens. I need to Unhide to find something.
View 2 Replies View RelatedI have a button that I want to hide/unhide a section of rows.
This is the code a have so far:
[Code] .....
So I've named a a section of rows "rngHideRows". I've tried to use the command .Range("rngHideRows").EntireRow.Hidden = True (and viariants of this) but nothing I try works.
code:
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Sheet2")
Select Case Target.Address(False, False)
Case "B12"[code].....
I need to change it so that it hides a range of rows, say (6:26) instead of adding a line of code for each of the rows from 6 to 26 that I want to hide
Also how can I go about hiding the same rows on 5 more sheets, can I add more sheetnames after "Sheet2"?
Need a macro which will hide rows having 0 values. On running once it will hide those rows having 0 values and on pressing second time it will unhide those hidden rows and so on.
View 14 Replies View RelatedI have a code that will hide all rows that have a "-" in Colum A, leaving me with the useful data.
However, this data is pulled from a front sheet that has data added to it.
What I would like my code to do is to relook at all the hidden cells, and if their value has changed from "-" to what ever the data may be then to unhide that row, displaying the data.
The code I'm using currently is: ....
I have a list box on a worksheet that contains the following names: field, vessel, pipe, structural. I would like to be able to unhide certain rows based
on the name shown in the list box. For example, if I choose field it would
unhide rows 3 thru 12, if i choose vessel it would unhide rows 13 thru 20, so on so forth. If nothing is choosen in the list box then rows stays hidden.
I have a workbook with multiple tabs. Each tab has about 600 rows. In each tab, I need to hide/unhide rows based on the value of a particular column in that row. For example,
Row1: 10,7.89,John,TRUE
Row2: 16,9.08,Ram,FALSE
Row3: 98,8.09,Joseph,FALSE
Row4: 76,1.23,Harry,TRUE
Using the 4th column (that has either TRUE or FALSE), I need to hide entire row. I am using a loop on the range and hiding each row. But it is taking about 4 minutes for each tab to loop through the 600 rows and hide/unhide the required rows. Is there a faster way to achieve this? Following is my code.
Sub Toggle_Rows()
Dim Cell As Range
Application.ScreenUpdating = False
For Each Cell In Range("D1:D600")
If UCase(Cell.Value) = "TRUE" Then
Cell.EntireRow.Hidden = Not Cell.EntireRow.Hidden
End If
Next
Application.ScreenUpdating = True
End Sub
I think this is fairly straight forward but my limited VBA skills have me going round in circles. I would like to have a button that hides and unhides rows where Column L has blank values but only from row 80 to 200 only. I would also like the button text to change from "Hide rows" to "Unhide Rows".
From Row 80 to 100 hide rows where there is no value in column LButton should be clickable to hide rows and then clickable to unhidebutton text changes.
I am struggling to come up with a vba code that allows me to search column B, Rows 21:89 for blanks then hide/unhide the associated row. I would like it to be one macro so that I don't have to have two buttons on the sheet to hide/unhide.
View 5 Replies View RelatedI have a macro that works fine with just numbers as a test run when I use it in the desired workbook/worksheets (where the values are returned via Indedx/match functions) there appears to be a small problem. (Below is the relevant post.)
[url]
Background is that I load raw data into a monthly account sheet which has the appropriate cost centre codes for allocating expenses.
I then use a vlookup in combination with indirect to place the summary data by costcentre code into annual worksheet.
I then have a summary sheet for printing purposes so I can print out a single month expenses by code to staple to the appropiate monthly costcentre statement. This is done by using Index & match functions looking at the annual summary sheet
What seems to be happening is that the code is sometimes recognizing formulas as a value & therefore showing zero values when I want only values 0 (as I sometimes have minus values).
Also sometimes when I go to unhide the all the rows it also is recognising some formulas as having value.
I am using Xl 2003.
I'm using this VBA code which is hiding cells in rows 59:111. Some of these cells have formulas and some don't.
Private Sub Hide_Unhide()
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
For i = 59 To 111
Rows(i).Hidden = (Cells(i, "b").Value = 0) + (Cells(i, "b").Value = "")
Next i
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
Here is the problem I'm running into: I want this to run in the background so the user won't have to click anything to hide/unhide the cells whenever the options in the drop down list are changed and the data expands/collapses.