Is it possible to copy listbox value into the textbox when double click....If the user select any row from listbox and double click on it onether userform will pop up and second column of listbox entry will load into textbox automatically.
I write a daily status report that adds my daily comment to a cell with previous text in it. I then paste it in three other cells. This process is slow and tedious since the text in the cell is now becoming extremely long due to organizational and managerial restraints of the existing format. I use cut and paste and manual enter, a alt + enter, to space new comment. I would like to be able to enter the text in a cell and have it update the comment cell with the text in it and to update the text box. I have reviewed the forum and have yet to find the answer and use of how else to pose the questions.
I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
I want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
Normally when I double click on a cell with a formula linked to another spreadsheet, the double click takes you to the source. However, if the cell also has a comment, the double click takes you into the edit comment option and not to the source.
Is it possible to turn off the edit comment option from the double click?
I am looking for assisitance in combining the functionality of two seperate combo box code sets. The first combo box code set allows the combo box to automaticially appear when a user Clicks on a cell that contains a data validation list. The second set of code will have a combo box appear when a user Double-clicks on a cell that contains a data validation list. And the code allows for Named Ranges on a seperate worksheet. I would like to have the functionality of having the combo box to appear when a user Clicks on a cell and not having to Double-click. Also, I would like to have the option to use Named Ranges on a seperate worksheet ("Validation Lists").
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim str As String Dim cboTemp As OLEObject Dim ws As Worksheet Set ws = ActiveSheet On Error Goto errHandler If Target.Count > 1 Then Goto exitHandler Set cboTemp = ws.OLEObjects("TempCombo") On Error Resume Next If cboTemp.Visible = True Then With cboTemp .Top = 10 .Left = 10 .ListFillRange = "" .LinkedCell = "" .Visible = False .Value = "" End With End If................
I am trying to make it so that when you double-click in a cell in column A, a message box opens populated with the text string in the corresponding cell (same row) in column Z. Seems to me like it should be easy enough, but despite spending the last hour searching for clues, I can't seem to figure it out.
I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
I've found the code below and tweaked to suit my needs but having trouble. Had it working one time. The code below calls a userform when the user double clicks on a cell. The form pops up and is not active/enabled. I cannot select anything on the form until I select a cell on the sheet, then everything on form becomes active/enabled.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) 'check cells for desired format to trigger the frmSel_WBS.show routine 'otherwise exit the sub Dim NumberFormat, DF NumberFormat = Array("[Blue]General") For Each DF In NumberFormat If DF = Target.NumberFormat Then frmSel_WBS.Show vbModeless End If Next End Sub
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
I'm trying to double-click a cell to edit the contents, and I am off a few pixels, it treats the double-click as a double-click on the cell border, not the cell contents, and the focus jumps to another cell in the direction of the border instead of going into edit mode. The effect is as if I had pressed Ctrl and the arrow in the direction of the border I clicked on.
The only way I've found to disable this is to turn off the option "Enable fill handle and cell drag-and-drop", but unchecking that also disables actually useful things, like dragging the corner of a formula call to copy it down, etc.
Is there a good way to disable this cell jumping when I accidentally double-click a cell border?
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
I would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
I have spreadsheet with client names. I'd like to build logic that will open a form with client information when a user double-clicks on the client name. But I have a couple of problems.
- First, I'd like to protect the sheet and hide the formulas. But when I protect the sheet, I get the "the cell or chart you are trying to change is protected" error when I double click the protected cell.
- If I deselect the "Select Locked Cells" options when I protect the sheet, I no longer have the ability to double-click on the cell.
how I can double click on a cell yet not allow the user to edit the cell (or see the formula)?
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
I would like to click on my chart, which then gets resized automatically depending on its current size.
My main macro creates various charts, all of them I connect to the macro "chartMakro". After the main macro has finished successfully, I can click on such a chart and the macro "chartMakro" is launched, supposedly resizing the chart. unfortunately i do NOT know how to tell the macro which is the active sheet, therefore my macro fails to work.
Question: When a click on a chart launches a macro, how can I tell the macro which chart called it?
'appending a macro to a chart ' MAIN MACRO '[...] activeChart.ChartArea.Select ActiveWindow.Visible = False Selection.OnAction = "chartMakro"............
I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
I have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.
I have this list of all rangenames in my workbookin column A:A
For some reason I want to doubleclick on the rangename in the list to activate this range.
The reason is that I want more smooth activation-prosess; The Excel Range List is too long to practical use as a direct lookup, so I want to activate directly from my own list (where i have added definitions to the range names.
I have tried to build a hyperlink formula, but failed. Maybe the macro below can be modified to do the job, but I am stuck here as well.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Dim RangeName Application.ScreenUpdating = False If Target.Count > 1 Then Exit Sub If Not Intersect(Target, Range("A:A")) Is Nothing Then Cancel = True
I seem to have broken something!. Whenever I double-click to open an Excel file (.xls files are associated correctly), Excel opens, but nothing happens. That status bar says "Ready," but my workbook never appears.
If I do a File-> Open within Excel, then I am able to open the workbook. I have no idea what is going on. This occurs for all Excel files whether they contain macros or not.