Sheet1
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Sheet2
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies View RelatedI have a list of numbers in column B of one sheet.
these numbers are unique and randomly allocated to other sheets in the workbook.
i would like a macro which when a user double clicks on a cell in the list of numbers .. the macro will jump to the sheet containing that number.. (i.e. do something like the find function)...
I have some code below which might be useful for you but I can't work out what I need to write.
I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
[Code] ....
I tried using the macro below but no luck:
[Code] ....
And i tried:
[Code] ....
I have spreadsheet with client names. I'd like to build logic that will open a form with client information when a user double-clicks on the client name. But I have a couple of problems.
- First, I'd like to protect the sheet and hide the formulas. But when I protect the sheet, I get the "the cell or chart you are trying to change is protected" error when I double click the protected cell.
- If I deselect the "Select Locked Cells" options when I protect the sheet, I no longer have the ability to double-click on the cell.
how I can double click on a cell yet not allow the user to edit the cell (or see the formula)?
I want to run a macro any time any cell in a range is double clicked. I can make it work with just on cell, but not any cell in the range.
View 3 Replies View RelatedI have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedIn a folder I have 2 excel files the the first file called products & contains sheets with the names of each product, in each product sheet I recorded the names of some customers.
The second file is called customers & contains sheets with the names of each customer.
when both files are open & I am in the products file I want to be able to select a product lets say shampoo double click on one of the customers & automatically go to the specified customer in the customers file.
I inserted this code in every sheet of products file & things went fine:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
For Each wb In Workbooks
For Each wk In wb.Worksheets
If wk.Name = Target.Value Then
MyWin = wb.Name
End If
Next wk
Next wb
Instead of inserting this code on every sheet module (I might have 60 sheets) I tried to insert it
Just In Thisworkbook module but it didn’t work:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
For Each wb In Workbooks
For Each wk In wb.Worksheets
If wk.Name = Target.Value Then
MyWin = wb.Name
End If
Is there a method by which I can prevent a user from renaming a worksheet by doubleclicking on the sheet tab ? Please note that I do not wish to use workbook protect method.
View 9 Replies View Relatedi am working on a pivot report and it works fine so far, but the only thing i am trying to do here is when duble click on a total it opens a new sheet with the report needed but it names the sheet as sheet1 and so on (sheet2,3,4...)
is there a way when i duble click a total it automaticly names the sheet for me?
I am trying to do is use VBA to move from the diagram directly to the macro number. The Cells on the Diagram have functions in them and there is no reference to what macro goes with which function. My list loocs like this
Macro NumbersFunctionCommands
1001 Lamp On
1002 Lamp Off
1003 (Empty)
1004 (Empty)
1005 (Empty)
1006 CH 611 611
1007 Ch 612 612
1008 Ch 613 613
1009 Ch 614 614
1010 Ch 615 615
1011 Ch 616 616
1012 Ch 617 617
1013 Ch 618 618
The diagram is a 20 by 20 grid of cells that correspond to macros I have a third sheet that has the macro numbers listed in the same format as the diagram. The problem I have is how to read the corresponding macro number from Sheet 3 then find that number on Sheet 2.
I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;
Sub CopySignificant()
Dim DestSheet As Worksheet
Set DestSheet = Worksheets("Clients to Invoice")
Dim sRow As Long 'row index on source worksheet
Dim dRow As Long 'row index on destination worksheet
Dim sCount As Long
sCount = 0
dRow = 1...................
I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action
Sub Toggle_Macro()
If IsEmpty(ActiveCell) = True Then
ActiveCell.Value = "X"
With Selection
.HorizontalAlignment = xlCenter
End With
With Selection.Font
.Name = "Arial"
.FontStyle = "Bold"
.Size = 12
.ColorIndex = 3
End With
Else: Selection.ClearContents
End If
End Sub
And placed the code below in Private Module of the Workbook Object.................
I am trying to set up a double click macro that checks the color index of the exact same cell you double click on, but in another sheet. What would be the syntax for that?
View 2 Replies View RelatedI want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
Normally when I double click on a cell with a formula linked to another spreadsheet, the double click takes you to the source. However, if the cell also has a comment, the double click takes you into the edit comment option and not to the source.
Is it possible to turn off the edit comment option from the double click?
What happens when I double click a cell in a pivot table?
Or when I double click the grand total?
I'm trying to do is create a link so that if you double click on a cell in a range (Sheet1!A3:A100) it will copy the value (ie Sheet1!A6) and paste it to the next sheet in a fixed cell (sheet2!B2).
The reason is I want to use the next sheet to do Vlookups (or may just do it in a macro) to fill in a template.
I am looking for assisitance in combining the functionality of two seperate combo box code sets. The first combo box code set allows the combo box to automaticially appear when a user Clicks on a cell that contains a data validation list. The second set of code will have a combo box appear when a user Double-clicks on a cell that contains a data validation list. And the code allows for Named Ranges on a seperate worksheet.
I would like to have the functionality of having the combo box to appear when a user Clicks on a cell and not having to Double-click. Also, I would like to have the option to use Named Ranges on a seperate worksheet ("Validation Lists").
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim str As String
Dim cboTemp As OLEObject
Dim ws As Worksheet
Set ws = ActiveSheet
On Error Goto errHandler
If Target.Count > 1 Then Goto exitHandler
Set cboTemp = ws.OLEObjects("TempCombo")
On Error Resume Next
If cboTemp.Visible = True Then
With cboTemp
.Top = 10
.Left = 10
.ListFillRange = ""
.LinkedCell = ""
.Visible = False
.Value = ""
End With
End If................
I've been reading through the forums, but do not know how to double click to get the calendar pop up,only in a certain range (e.g. Cells G5:G85).
I already have the module: frmCalendar
Running Office 2003
I am trying to make it so that when you double-click in a cell in column A, a message box opens populated with the text string in the corresponding cell (same row) in column Z. Seems to me like it should be easy enough, but despite spending the last hour searching for clues, I can't seem to figure it out.
View 8 Replies View RelatedI have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedI've found the code below and tweaked to suit my needs but having trouble. Had it working one time. The code below calls a userform when the user double clicks on a cell. The form pops up and is not active/enabled. I cannot select anything on the form until I select a cell on the sheet, then everything on form becomes active/enabled.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'check cells for desired format to trigger the frmSel_WBS.show routine
'otherwise exit the sub
Dim NumberFormat, DF
NumberFormat = Array("[Blue]General")
For Each DF In NumberFormat
If DF = Target.NumberFormat Then
frmSel_WBS.Show vbModeless
End If
Next
End Sub
I'm trying to double-click a cell to edit the contents, and I am off a few pixels, it treats the double-click as a double-click on the cell border, not the cell contents, and the focus jumps to another cell in the direction of the border instead of going into edit mode. The effect is as if I had pressed Ctrl and the arrow in the direction of the border I clicked on.
The only way I've found to disable this is to turn off the option "Enable fill handle and cell drag-and-drop", but unchecking that also disables actually useful things, like dragging the corner of a formula call to copy it down, etc.
Is there a good way to disable this cell jumping when I accidentally double-click a cell border?
if there is a workaround to this issue. I have this code that transfers data to a textbox but it stops after hitting the character limit. Does anyone know how to extend this limit ?
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Cancel = True
With Me.Shapes("textbox1").TextFrame.Characters
.Text = .Text & Target.Value
End With
End Sub
How to run some VBA code only when double click any cell of three different columns (say A, G,H) and not run in any other cell. This is being run in Excel 2007.
View 7 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm‎
The datas has stored in columns "a:g" all the way down.
When i double click any cell in column "A" I would like to store the value one by one into the column "K" from first cell to down.
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View Related