The datas has stored in columns "a:g" all the way down.
When i double click any cell in column "A" I would like to store the value one by one into the column "K" from first cell to down.
I'm trying to do is create a link so that if you double click on a cell in a range (Sheet1!A3:A100) it will copy the value (ie Sheet1!A6) and paste it to the next sheet in a fixed cell (sheet2!B2).
The reason is I want to use the next sheet to do Vlookups (or may just do it in a macro) to fill in a template.
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedI am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
[Code] ....
I tried using the macro below but no luck:
[Code] ....
And i tried:
[Code] ....
I want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
Normally when I double click on a cell with a formula linked to another spreadsheet, the double click takes you to the source. However, if the cell also has a comment, the double click takes you into the edit comment option and not to the source.
Is it possible to turn off the edit comment option from the double click?
What happens when I double click a cell in a pivot table?
Or when I double click the grand total?
I have a list of numbers in column B of one sheet.
these numbers are unique and randomly allocated to other sheets in the workbook.
i would like a macro which when a user double clicks on a cell in the list of numbers .. the macro will jump to the sheet containing that number.. (i.e. do something like the find function)...
I have some code below which might be useful for you but I can't work out what I need to write.
I want to run a macro any time any cell in a range is double clicked. I can make it work with just on cell, but not any cell in the range.
View 3 Replies View RelatedI am looking for assisitance in combining the functionality of two seperate combo box code sets. The first combo box code set allows the combo box to automaticially appear when a user Clicks on a cell that contains a data validation list. The second set of code will have a combo box appear when a user Double-clicks on a cell that contains a data validation list. And the code allows for Named Ranges on a seperate worksheet.
I would like to have the functionality of having the combo box to appear when a user Clicks on a cell and not having to Double-click. Also, I would like to have the option to use Named Ranges on a seperate worksheet ("Validation Lists").
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim str As String
Dim cboTemp As OLEObject
Dim ws As Worksheet
Set ws = ActiveSheet
On Error Goto errHandler
If Target.Count > 1 Then Goto exitHandler
Set cboTemp = ws.OLEObjects("TempCombo")
On Error Resume Next
If cboTemp.Visible = True Then
With cboTemp
.Top = 10
.Left = 10
.ListFillRange = ""
.LinkedCell = ""
.Visible = False
.Value = ""
End With
End If................
I've been reading through the forums, but do not know how to double click to get the calendar pop up,only in a certain range (e.g. Cells G5:G85).
I already have the module: frmCalendar
Running Office 2003
I am trying to make it so that when you double-click in a cell in column A, a message box opens populated with the text string in the corresponding cell (same row) in column Z. Seems to me like it should be easy enough, but despite spending the last hour searching for clues, I can't seem to figure it out.
View 8 Replies View RelatedI have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedI've found the code below and tweaked to suit my needs but having trouble. Had it working one time. The code below calls a userform when the user double clicks on a cell. The form pops up and is not active/enabled. I cannot select anything on the form until I select a cell on the sheet, then everything on form becomes active/enabled.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'check cells for desired format to trigger the frmSel_WBS.show routine
'otherwise exit the sub
Dim NumberFormat, DF
NumberFormat = Array("[Blue]General")
For Each DF In NumberFormat
If DF = Target.NumberFormat Then
frmSel_WBS.Show vbModeless
End If
Next
End Sub
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies View RelatedI'm trying to double-click a cell to edit the contents, and I am off a few pixels, it treats the double-click as a double-click on the cell border, not the cell contents, and the focus jumps to another cell in the direction of the border instead of going into edit mode. The effect is as if I had pressed Ctrl and the arrow in the direction of the border I clicked on.
The only way I've found to disable this is to turn off the option "Enable fill handle and cell drag-and-drop", but unchecking that also disables actually useful things, like dragging the corner of a formula call to copy it down, etc.
Is there a good way to disable this cell jumping when I accidentally double-click a cell border?
if there is a workaround to this issue. I have this code that transfers data to a textbox but it stops after hitting the character limit. Does anyone know how to extend this limit ?
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Cancel = True
With Me.Shapes("textbox1").TextFrame.Characters
.Text = .Text & Target.Value
End With
End Sub
How to run some VBA code only when double click any cell of three different columns (say A, G,H) and not run in any other cell. This is being run in Excel 2007.
View 7 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI have spreadsheet with client names. I'd like to build logic that will open a form with client information when a user double-clicks on the client name. But I have a couple of problems.
- First, I'd like to protect the sheet and hide the formulas. But when I protect the sheet, I get the "the cell or chart you are trying to change is protected" error when I double click the protected cell.
- If I deselect the "Select Locked Cells" options when I protect the sheet, I no longer have the ability to double-click on the cell.
how I can double click on a cell yet not allow the user to edit the cell (or see the formula)?
Sheet1
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Sheet2
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
I have a sheet with some 300 plus rows of data. I use filters to sort through the rows to get down to anywhere from 8 to 10 or so rows. At that point I would like to be able to select (doule click) a filtered row of 10 cells (A:J) copy the data and paste it to a different sheet starting with cell B18. I want to be able to perform this process up to 5 seperate times.
I have recorded a macro to do basically what I am trying but with many short falls. It only selects one row, I cannot double click on a row and it dosen't always paste to the proper cell.
I am looking to double click a cell in Column "A" to copy the ajacent cells to another sheet.
In worksheet "Summary". When I double click Cell A5, I want to copy Cells B5:D5 to Sheet "Timesheet", insert Row "5" and paste in Cells B5:D5.
Split from Copy Rows, Meeting Criteria, From Multiple Worksheets & Append To Summary Sheet
This has been wrecking my head for a week. For the debtors tab it is all of the rows which have the value "Unpaid" for each of the 12 months that need to be copied into the tab. For the invoice I thought there could be a button at the end of each row and when you clicked it, it put the info into the invoice template and then the person could just print it off and resend it. And then do the same for the rest of the invoices.
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
My goal would be to click on a cell within a range of cells (in a column) and have the value copied to a specified destination cell. There would be a few different columns with source cells and two destination cells. Each column would to copy to a specific cell. My ojective is basically to deal with different processing times (days, weeks, months).
Here's a little visual, clicking on C4 for example would copy the value "5" to cell B2. Clicking on D4 would copy "12" to A2.
row/col
A
B
C
D
E
1
Days
Weeks
Processing time X (weeks)
Processing time Y (in days)
Processing time Z (in weeks)
2
3
10
110
3
4
11
111
4
5
12
112
5
6
13
113
I have a worksheet with 2 pivot tables. what I would like to do is, when the user right clicks on a name, the name will be copy and pasted to cell B2 of the other sheet.
View 5 Replies View RelatedI do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
what im trying to do is to copy only the last 7 characters in column A:A
when i dubleclick on a cell.
example:
if i click on a cell that has "8peu99s8a" i want it to copy only "eu99s8a" wich is the last 7 characters, and then i will past the data to another program i use.
this code will only apply for any cell in column A:A
I do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
How can I do it?