Is there any way to add together a portion of an array without using a loop or for statement. i.e.) I have a array variable: arrayvar = array ( 1, 2, 3, 4, 5)
is there a way to sum the last two numbers in the array without using
arrayvar (3) + arrayvar (4) or a loop or for statement.
I am thinking something along the lines of worksheetfunction.sum( arrayvar( 3 to 4)) I know that this does not work but I hope you can see what I am trying to do
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I am trying to loop through different SlicerCaches but it doesn't seem to work.
Here is the code, I am trying,
VB:
Test_Name = Array("[Test - Test Allocation]", "[Test 2]")
For i = LBound(Test_Name) To UBound(Test_Name)
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
The code returns a mismatch 13 error.
When I try it without an array, it works fine.
VB:
Test_Name = "[Test - Test Allocation]"
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
I want to know if I can populate an array with variables..
For example, imagine I've declared 3 variables a, b, c.. and each variable has been assigned a value (which can change)
now I want to say this:
myArray = (a, b, c)
then I want to be able to loop through myArray and retrieve the value attached to each variable..
I have 2 array variables in a block of code which I need to compare to check if the items in the arrays are exactly the same. The arrays are exactly the same size and I can see the contents of the arrays in the watch window.
When I try to run and IF statement as in: IF VARIABLE1 = VARIABLE2 THEN - I get a compile error saying "type mismatch" on the equal sign.
What would be the best approach/funcvtion to use in excel if I had an array of variables and wanted to match them?
E.g.
1,2,3,4,5,6,7
I would like to lookup up a column and if either of these numbers are in that row to say "yes otherwise "No"
I need to be able to do a look up in 9 different table arrays using 9 different ranges.
I have attached a worksheet to help explain. My problem is that I can't have 9 IF statements in one formula.
I am not sure how to make this smaller or work.
Okay, I made an epic fail on a previous post that i turned to Solved, a real error on my part of not fully testing before i posted Solved, basically i was so excited that i'd solved it myself, well partially.
I have the following code in the first sub routine that collects which option button has been selected.
[Code] .....
The second sub routine is per following.
[Code] .......
Unfortunately when i tested this with only one variable myRev(1) it worked fine but when i added more myRev variables 2 thru 4 if failed, so is there a trick to passing an array variable between sub routines?
What I am trying to do is to automatically build a "tree" diagram representing the links in a huge model which is dynamically configured. What I have a problem with is the following:
The tree consists of layers, I start off with the top layer and for each entry in the top layer I can add all its subsidiary layers and draw links between them, this uses a function which takes as its arguments the node name and its layer number (how far down the tree it is) and the number of items in that layer so far.
So I start at the first item in Layer 1 and there are as yet no layers below it. I start at the first one and add the first item in layer 2 then I kick the function off again and that adds the first item connected to item 1 in layer 2 in the layer below (3) starting at the first one, and so on. When I reach the bottom I go up one layer and add the second item in the bottom layer and so on. When I have added all the connctions to the first item in the next to bottom layer I go up one layer and add the second item connected to the first item in that layer and then add all the items connected to it and so on and so on.
In this way I build up the network exhaustively (to make things more complex more than one item in a layer may connect to the same item in the layer below).
I can do almost all that, the issue I am struggling with is I need to keep track of how many items there are in each layer (as some layer 1 items connect to 1, 2, 3 ...8 layer 2 items and so on). my idea is to keep a running total of these in an array LevelCount(1), LevelCount(2) etc. so when I add a new item to a layer I know where to put it. However I cant workout how to do this final step.
Currently I have a function that draws the nodes below a specified node this and takes the correct value from the array LevelCount(n) by passing Levelcount(n) (where n represents how far down the tree you are) into the function and the function then updates the value of LevelCount(n) (ByRef) so that next time I use it it is correct. That is fine but what I want to do is to is to call the same function from within itself when it adds each node which would make it work automatically - it would keep calling instances of the function until it reached bottom and then go back one step at a time to the top but I cant work out how to reference the right value in the array to pass into the second (and subsequent) instances of the function.
I don't think I can simply pass (n) into the function and in the body of the function set LevelCount(n) = LevelCount(n)+1
I also dont know ahead of time how many layers the model will have, nor can I tell which layer a node sits in as it depends on the links that are dynamically configured.
Beyond this a node can also be subsidiary to nodes in more than one level so it needs to sit at the lowest level - but I suspect if I can work out how to do the first bit i can do this too.
I am trying to construct an indirect array reference as follows;
Dim A10 As Variant
Dim A11 As Variant
Dim A12 As Variant
For i = 0 To 2
String1 = "A" & (10 + i)
String1 = Cells(6, D1_CNum + i).Resize(2995, 1)
Next
But the above doesn't work, what would be the correct way of creating a reference to an Array using variables to contruct the name of the active Array?
I was hoping String1 would equal "A10", so that on the Cells command Array A10, A11 and A12 would be filled using the value of String1??
I have a dynamic number of rows each with three colums of values. These varaibles I want to fill an array with but I don't know how.
Now I've just "concated" these three variables into a string and then I intend to split the string into rows by the third comma. (see below)
I think it's easier though to use an array and I really appreciate some assistance. Please tell me also the best way to sort the array. It will be sorted by var_Status which is an integer. (sort order: max positive to max minimum)
PreString = PreString & var_StartWeek & ", " & var_Status & ", " & var_Totalh & ", "
I am trying to pass a public variable to another module in the same workbook. On Module1 I declare at the top
Public stores
Sub Main()
Dim stores(1 To 100, 1 To 10, 1 To 10)
Reader
...which then calls the procedure Reader in Module2
Sub Reader()
let x=1
let y=1
let z=1
let stores (x,y,z)=activecell.value
I've left out the portions of code that seem irrelevant. When the macro runs, I get a type mismatch error on the "let stores" line. If I move the code from Reader into the procedure Main, it works, so it seems to be an issue with passing the variable. I haven't used multiple modules very often so this is probably a very basic issue.
Excel 2007.
I'm basically copying and pasting a bunch of columns. Currently, my code is very long because I'm not using a loop to plug in the column header. how I'd store all the column headers in an array (I think) and loop through 1-by-1.
Here's a look at what I'm doing now:
Code:
' ''Project Number
x = "Project number"
i = Sheets("RawData").Rows(FirstRow).Find(x).Column
[Code]....
how to store these column headers in an array and then pull them?
I made the formula work great, however I want to cut it down and simplify it and make it easier to manipulate... as opposed to having the filename written every so many times.. replace with a loop instead.... so:
Private Sub Weeklytestt_Click()
Dim varCurDate As String
If DateYesterday.Value = True Then Answer = "1"
If DateToday.Value = True Then Answer = "2"
If DateTyped.Value = True Then Answer = "3"
Select Case Answer
Case Is = "1"
varCurDate = Format(Date, "yyyymmdd")
varCurDate = varCurDate - 1
Case Is = "2"
varCurDate = Format(Date, "yyyymmdd")..........
In my VBA project I've declared several public variables as normal (ahead of
all procedures) ... Public simolo() As double etc. They are declared in normal modules, and arent declared twice. I set the values in one procedure and then execute a second procedure but, when the variable is encountered in the second procedure, it appears to be empty and I get a "Subscript out of range" error. Clearly, the public variable isn't public since no data is stored in it.
What is going on?
I have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.
e.g.
Main Data Table
Color Operator
005--325 005
004--326 004
003--327
001--328
002--322
Lookup Color
001 - Red
002 - Blue
003 - Green
004 - Violet
005 - White
Lookup Operator Table
323 - Operator 1
324 - Operator 2
325 - Operator 3
326 - Operator 4
327 - Operator 5
328 - Operator 6
I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.
Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedSay I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies View RelatedIs there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can