Create Array Of Variables And Sort
Nov 12, 2006
I have a dynamic number of rows each with three colums of values. These varaibles I want to fill an array with but I don't know how.
Now I've just "concated" these three variables into a string and then I intend to split the string into rows by the third comma. (see below)
I think it's easier though to use an array and I really appreciate some assistance. Please tell me also the best way to sort the array. It will be sorted by var_Status which is an integer. (sort order: max positive to max minimum)
PreString = PreString & var_StartWeek & ", " & var_Status & ", " & var_Totalh & ", "
View 9 Replies
ADVERTISEMENT
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
May 5, 2006
Is there any way to add together a portion of an array without using a loop or for statement. i.e.) I have a array variable: arrayvar = array ( 1, 2, 3, 4, 5)
is there a way to sum the last two numbers in the array without using
arrayvar (3) + arrayvar (4) or a loop or for statement.
I am thinking something along the lines of worksheetfunction.sum( arrayvar( 3 to 4)) I know that this does not work but I hope you can see what I am trying to do
View 4 Replies
View Related
Jun 17, 2013
I am trying to loop through different SlicerCaches but it doesn't seem to work.
Here is the code, I am trying,
VB:
Test_Name = Array("[Test - Test Allocation]", "[Test 2]")
For i = LBound(Test_Name) To UBound(Test_Name)
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
The code returns a mismatch 13 error.
When I try it without an array, it works fine.
VB:
Test_Name = "[Test - Test Allocation]"
ActiveWorkbook.SlicerCaches("Slicer_Exec_Function_Summary1").VisibleSlicerItemsList = Array("[Mercury].[Exec Function Summary].&" & Test_Name & "")
View 3 Replies
View Related
May 7, 2012
I want to know if I can populate an array with variables..
For example, imagine I've declared 3 variables a, b, c.. and each variable has been assigned a value (which can change)
now I want to say this:
myArray = (a, b, c)
then I want to be able to loop through myArray and retrieve the value attached to each variable..
View 6 Replies
View Related
May 22, 2012
I have 2 array variables in a block of code which I need to compare to check if the items in the arrays are exactly the same. The arrays are exactly the same size and I can see the contents of the arrays in the watch window.
When I try to run and IF statement as in: IF VARIABLE1 = VARIABLE2 THEN - I get a compile error saying "type mismatch" on the equal sign.
View 3 Replies
View Related
Feb 21, 2008
What would be the best approach/funcvtion to use in excel if I had an array of variables and wanted to match them?
E.g.
1,2,3,4,5,6,7
I would like to lookup up a column and if either of these numbers are in that row to say "yes otherwise "No"
View 9 Replies
View Related
Jun 11, 2009
I need to be able to do a look up in 9 different table arrays using 9 different ranges.
I have attached a worksheet to help explain. My problem is that I can't have 9 IF statements in one formula.
I am not sure how to make this smaller or work.
View 14 Replies
View Related
Jul 22, 2014
Okay, I made an epic fail on a previous post that i turned to Solved, a real error on my part of not fully testing before i posted Solved, basically i was so excited that i'd solved it myself, well partially.
I have the following code in the first sub routine that collects which option button has been selected.
[Code] .....
The second sub routine is per following.
[Code] .......
Unfortunately when i tested this with only one variable myRev(1) it worked fine but when i added more myRev variables 2 thru 4 if failed, so is there a trick to passing an array variable between sub routines?
View 2 Replies
View Related
Sep 15, 2012
What I am trying to do is to automatically build a "tree" diagram representing the links in a huge model which is dynamically configured. What I have a problem with is the following:
The tree consists of layers, I start off with the top layer and for each entry in the top layer I can add all its subsidiary layers and draw links between them, this uses a function which takes as its arguments the node name and its layer number (how far down the tree it is) and the number of items in that layer so far.
So I start at the first item in Layer 1 and there are as yet no layers below it. I start at the first one and add the first item in layer 2 then I kick the function off again and that adds the first item connected to item 1 in layer 2 in the layer below (3) starting at the first one, and so on. When I reach the bottom I go up one layer and add the second item in the bottom layer and so on. When I have added all the connctions to the first item in the next to bottom layer I go up one layer and add the second item connected to the first item in that layer and then add all the items connected to it and so on and so on.
In this way I build up the network exhaustively (to make things more complex more than one item in a layer may connect to the same item in the layer below).
I can do almost all that, the issue I am struggling with is I need to keep track of how many items there are in each layer (as some layer 1 items connect to 1, 2, 3 ...8 layer 2 items and so on). my idea is to keep a running total of these in an array LevelCount(1), LevelCount(2) etc. so when I add a new item to a layer I know where to put it. However I cant workout how to do this final step.
Currently I have a function that draws the nodes below a specified node this and takes the correct value from the array LevelCount(n) by passing Levelcount(n) (where n represents how far down the tree you are) into the function and the function then updates the value of LevelCount(n) (ByRef) so that next time I use it it is correct. That is fine but what I want to do is to is to call the same function from within itself when it adds each node which would make it work automatically - it would keep calling instances of the function until it reached bottom and then go back one step at a time to the top but I cant work out how to reference the right value in the array to pass into the second (and subsequent) instances of the function.
I don't think I can simply pass (n) into the function and in the body of the function set LevelCount(n) = LevelCount(n)+1
I also dont know ahead of time how many layers the model will have, nor can I tell which layer a node sits in as it depends on the links that are dynamically configured.
Beyond this a node can also be subsidiary to nodes in more than one level so it needs to sit at the lowest level - but I suspect if I can work out how to do the first bit i can do this too.
View 7 Replies
View Related
Jun 24, 2008
I am trying to construct an indirect array reference as follows;
Dim A10 As Variant
Dim A11 As Variant
Dim A12 As Variant
For i = 0 To 2
String1 = "A" & (10 + i)
String1 = Cells(6, D1_CNum + i).Resize(2995, 1)
Next
But the above doesn't work, what would be the correct way of creating a reference to an Array using variables to contruct the name of the active Array?
I was hoping String1 would equal "A10", so that on the Cells command Array A10, A11 and A12 would be filled using the value of String1??
View 9 Replies
View Related
Jun 8, 2007
I am trying to pass a public variable to another module in the same workbook. On Module1 I declare at the top
Public stores
Sub Main()
Dim stores(1 To 100, 1 To 10, 1 To 10)
Reader
...which then calls the procedure Reader in Module2
Sub Reader()
let x=1
let y=1
let z=1
let stores (x,y,z)=activecell.value
I've left out the portions of code that seem irrelevant. When the macro runs, I get a type mismatch error on the "let stores" line. If I move the code from Reader into the procedure Main, it works, so it seems to be an issue with passing the variable. I haven't used multiple modules very often so this is probably a very basic issue.
View 3 Replies
View Related
Sep 7, 2012
Excel 2007.
I'm basically copying and pasting a bunch of columns. Currently, my code is very long because I'm not using a loop to plug in the column header. how I'd store all the column headers in an array (I think) and loop through 1-by-1.
Here's a look at what I'm doing now:
Code:
' ''Project Number
x = "Project number"
i = Sheets("RawData").Rows(FirstRow).Find(x).Column
[Code]....
how to store these column headers in an array and then pull them?
View 4 Replies
View Related
Apr 15, 2009
I made the formula work great, however I want to cut it down and simplify it and make it easier to manipulate... as opposed to having the filename written every so many times.. replace with a loop instead.... so:
Private Sub Weeklytestt_Click()
Dim varCurDate As String
If DateYesterday.Value = True Then Answer = "1"
If DateToday.Value = True Then Answer = "2"
If DateTyped.Value = True Then Answer = "3"
Select Case Answer
Case Is = "1"
varCurDate = Format(Date, "yyyymmdd")
varCurDate = varCurDate - 1
Case Is = "2"
varCurDate = Format(Date, "yyyymmdd")..........
View 9 Replies
View Related
Aug 18, 2006
In my VBA project I've declared several public variables as normal (ahead of
all procedures) ... Public simolo() As double etc. They are declared in normal modules, and arent declared twice. I set the values in one procedure and then execute a second procedure but, when the variable is encountered in the second procedure, it appears to be empty and I get a "Subscript out of range" error. Clearly, the public variable isn't public since no data is stored in it.
What is going on?
View 6 Replies
View Related
Nov 20, 2012
I have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.
e.g.
Main Data Table
Color Operator
005--325 005
004--326 004
003--327
001--328
002--322
Lookup Color
001 - Red
002 - Blue
003 - Green
004 - Violet
005 - White
Lookup Operator Table
323 - Operator 1
324 - Operator 2
325 - Operator 3
326 - Operator 4
327 - Operator 5
328 - Operator 6
I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.
Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.
View 2 Replies
View Related
Oct 11, 2007
I am trying to create a spreadsheet containing a table of dimensions that are multiples of up to six loadable variables. I work for a stainless steel tank manufacturer. The body of tanks are formed from coil stock of varying widths. Typically these might be 1200mm, 1500mm, 2000mm and possibly 1800mm as well as the imperial equivalents. This could mean up to eight variables but in reality all are unlikely at any one given time.
We are told the volume that the tank is required to contain and a target preferred diameter. The theoretical height is therefore derived from this information. But now comes the tricky bit. It is desirable, to minimise cost of welding by minimising the number of strakes or wrappers. Can anyone give me a formula or whatever that can be used to do this and hopefully generate a table of close heights up to say 40 meters. Thus allowing an operator to select from say five presented options.
I have a table in a spreadsheet that the three principal widths of 1200mm 1500mm and 2000mm generate. It was created for me a while ago by a gentleman working at the Amsterdam Museum that I’m happy to send for perusal. The trouble is he never told me how he did it and no matter how hard I try, I cannot discover the method or formula. The first column gives the total combined height, the second the number of 1200mm wrappers, the third the number of 1500mm and the last the number of 2000mm. It is that simple
View 4 Replies
View Related
Apr 20, 2012
I am trying to create an active cell formula based of variables from given cells.
With ActiveCell.FormulaR1C1 = "=CONCATENATE(""RU"",RC[-12],RC[-11],RC[-10],RC[-9])-CONCATENATE(""MU"",RC[-12],RC[-11],RC[-10],RC[-9])"
ActiveCell.Formula = ActiveCell.Value
But This does nothing.
View 5 Replies
View Related
Jun 30, 2014
Excel file. The file has two tabs: 'Input' and 'Master'. The 'Input' tab is for users to input any new records, and the 'Master' tab is to retrieve data from the 'Input' tab. Given that some users may want to insert a row in between (rather than add at the bottom).
I used arrays in the 'Master' tab such as:
={IF(ISERROR(1/Input!E2:E250),"",Input!E2:E250)}
Now there came the problem: in the 'Master' tab, the data cannot be sorted when the arrays are used. Otherwise, there is a warning message: You cannot change part of an array.
View 3 Replies
View Related
Mar 1, 2014
I'm trying to sort 2D array not via worksheet, using VBA array. But I failed. excel file enclosed (Sorting by Return and xlAscending).
View 2 Replies
View Related
Sep 27, 2009
On from a solution I am using in the sheet which uses very well an Array Formula.
In the attached book I have a sheet with a bunch of tables called Site Table. In the sheet called Working Sheet I want to get the text Site Names and list them in Column A. Sorted would be nice not required but I can't think of way to avoid blanck rows without a manual sort. I tried many versions of Find without a solution as well.
View 5 Replies
View Related
Oct 20, 2009
I am trying sort a bunch of different ranges. So I am trying to use the same sort code but run an array of ranges through. This code is for only two ranges
CA3:CD200 and CF3:CI200. I want to pass the ranges as variables through the sort code but I cannot get it to work.
View 4 Replies
View Related
Jul 11, 2007
two parts:
1.
The following is the VBA version of what i've been using:
Range("A1:J1000").Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:= _
Range("E2"), Order2:=xlAscending, Key3:=Range("F2"), Order3:=xlDescending _
, Header:=xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:= _
xlTopToBottom, DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, _
DataOption3:=xlSortNormal
now arrays are bigger than 1000 rows>> even bigger than 65536.
Such an array is stored in "arrBIG" and dimed as (1 to 10, 1 to 100000). The goal is to sort it by the 4'th, then 5th then 6th values in the first dimension - the one that is 1 to 10 - i call this the column.
arrBIG.Sort Key1:=4, Order1:=xlAscending, Key2:= _
5, Order2:=xlAscending, Key3:=6, Order3:=xlDescending _.................
View 9 Replies
View Related
Aug 15, 2006
I would like to sort the items in an array.
View 2 Replies
View Related
Nov 18, 2006
I have a string (PreString) that gets its values from a procedure call (PreResult). The string consists of 4 values for each loop which I then split into the y array.
I then want to transpose the array to the worksheet for sorting.
I don't really get the transpose to work as I want to. I want every 4:th y to be printed on a new row (x). I don't really know how to use the Ubound function to get it right.
Should I make a 2 dimensional array instead ? If so, how is that made ?
Dim x As Integer, z As Integer
Dim var_Status As Integer
Dim var_Week As String
Dim var_HoursPerWeek As Integer
Dim PreString As String
i = var_StartWeekNr
j = var_RangeNumberOfWeeks
z = 0
x = 0
var_Status = 0
var_Week = ""
var_HoursPerWeek = 0
PreString = ""
View 8 Replies
View Related
Oct 1, 2008
I have a string that I need to sort.
Below code works beautifully but doesn't sort numbers, any advice to get this to sort numbers as well?
Function Alphabetize(ByVal sText As String) As String
Dim sWords() As String, sTemp As String
Dim i As Long, j As Long, n As Long
'-- clean up text
For i = 1 To Len(sText)
Select Case Mid$(sText, i, 1)
Case " ", "a" To "z", "A" To "Z"
Case Else: Mid$(sText, i, 1) = " "
End Select
Next
'-- remove leading and trailing spaces....................
View 9 Replies
View Related
Jun 4, 2007
Im looking for an algorithm to sort an array of data, deleting multiple values whithin the array and shifting the values down the array to leave no gaps. the crude set of loops i am currently using is:
For f = 0 To 100
For g = f + 1 To 100
If LineArray(g) = LineArray(f) Then LineArray(g) = ""
Next g
Next f
which does work and serves my purpose but is messy as it leaves blank gaps in the array.
View 2 Replies
View Related
Jun 7, 2008
I have been trying to take a variant array that has 6 columns, output it to a new worksheet (although I would prefer to just sort the array but can't get that working - how I can do this please feel free), sort the worksheet by 2 different columns, and then move these values back into the original array. I think I have the dumping and sorting down but I can't figure out the putting back into the array part. Here is the code I have thus far. varRecords is the array I am dumping to the new worksheet.
Dim dumpSheet As Worksheet
Set dumpSheet = Sheets.Add
Range(Cells(1, 1), Cells(1, UBound(varRecords))) = varRecords
Range("A1:F" & numRows).Sort Key1:=Range("C2"), Order1:=xlAscending, Key2:=Range _
("A2"), Order2:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase _
:=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _
DataOption2:=xlSortNormal
View 5 Replies
View Related
Nov 10, 2008
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String)
Dim DVListName As String
DVListName = "DV" & sListName
Application.Goto Reference:=sListName
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
View 4 Replies
View Related
May 18, 2009
How can I sort an array of data based on the selection from a drop-down menu? And can it be 'secondary' sorted with the result from a second drop-down (ascending or descending is unimportant)?
View 2 Replies
View Related
