I have written a piece of VBA code which I want to assign to a button in the front end of excel, however once I assign it and then press the button to run the macro (which works) I am not able to then press it again incase I need to re run it?
View 7 Replies
I managed to save workbook as values only by the help of this forum
Now is it possible to disable the commond buttons, when the workbook is saved as values only or can we delete the macro's.
I'm using excel 2010. I have a spreadsheet with a row that is hidden. One cell in this row contains a button. I have a macro that copies this hidden row, inserts it at another point on the spreadsheet and unhides it. It works great in excel 2007, but the button on the hidden row disappears when I close the sheet and re-open it.
View 7 Replies View RelatedIs it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI have created an add in for excel with all the macros that will be used for a particular workbook. I have some buttons in the workbook that I have macros assigned to them. I assigned them to the xls workbook before I saved it as an add in. Now, when one of the buttons is pressed, it opens the xls workbook.
how to assign the macros from the add in to the buttons.
The sceanrio is that I use vba to create commandbutton and make that commandbutton call a macro
Code:
With ActiveSheet.Buttons.Add(183.75, 38.25, 96.75, 38.25)
.Name = "Test"
.OnAction = "anothermacro"
End With
ActiveSheet.Shapes("Test").Characters.Text = "Test"
I have placed a CommandButton1 and CommandButton2 on the Sheet1....how do i then assign the macro code to these Buttons
CommandButton1 is called MANAGERS GROUPS (macro called Split Sheets)
CommandButton2 is called CLEAR MANAGERS GROUPS (macro called clear_managers)
It was working before as i just used rectangle shapes as the buttons but have since removed these shapes and used the CommandButtons
The error is below in RED
Code:
Option Explicit
Public TrainingRows
Sub SplitSheets()
'
Dim rCell As Range
Dim sht As Worksheet
Dim lastrow As Integer
[code].....
i have created a very simple macro and wish to assign it to a command button i have placed on my worksheet.
View 9 Replies View RelatedUsing workbook A, I have created a new workbook (let's call it workbook B), and have copied a module over to workbook B using macros.
My question is, is there a way to assign the module to a command button using vba?
How would i go about assigning three sub routines to one button so that they all activate when a command button is clicked.
View 3 Replies View RelatedI use Excel 2003. Can I assign different macros to a checkbox depending on whether the box is CHECKED or UNCHECKED? In other words, if I link the box to A1 and the value there is TRUE, can I run a macro based on that value? Then, if the value is FALSE, can I run a different macro based on the FALSE value?
I'm building a time sheet. Some of the time I keep track of is billable per hour, some is billable as a complete job. I'd like to use a checkbox to indicate if the time in a particular row is billable as a complete job. If it is, the time would not only be included in the total time for the column, it would also be accounted for in a separate worksheet. I'm thinking macros are the way to go here but maybe there's something better?
I am an average user of excel and i am wanting some help with macros. I can record macros, that i do understand. Its the part where you can assign the macros to the Checkbox i have created.
The effect i am trying to create is that when the checkbox has a tick in it, certain properties happen to a cell. But when the checkbox has no tick in it something else happens to the cell. I have recorded 2 macros for what i want to happen its just getting it associated with the true/false of the checkbox.
I have no Visual Basic Experience and i have tried reading other posts, but the code just goes right over my head at the moment. Thanks in advance for anyhelp. I can attach the spreadsheet etc...
I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
View 2 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
View 9 Replies View RelatedIs it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
View 8 Replies View Relatedi am trying to access buttons like ' Format - Column - Hide'
View 5 Replies View RelatedI was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies View RelatedI need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
Does anyway to use a scroll bar to priortize a selected range?
I have included a simple example that I would like to rearrange with a scroll bar.
For example, I would want be able to select one row in the range and then place it either above the current position or any where in that range.
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies View RelatedI've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies View RelatedHOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
