Delete Macros And Command Buttons
Jan 23, 2007I managed to save workbook as values only by the help of this forum
Now is it possible to disable the commond buttons, when the workbook is saved as values only or can we delete the macro's.
I managed to save workbook as values only by the help of this forum
Now is it possible to disable the commond buttons, when the workbook is saved as values only or can we delete the macro's.
I have written a piece of VBA code which I want to assign to a button in the front end of excel, however once I assign it and then press the button to run the macro (which works) I am not able to then press it again incase I need to re run it?
View 7 Replies View RelatedSo I'm trying my hand at creating VBA buttons and functions that do the following.
Button 1 :
to add a column with every click. The button will create one extra column. So by design there will be at least 1 column. Example if the button is clicked twice it will create 3 columns. I just need a buffer col. (contains no data)
Button 2 :
to delete empty columns leaving only one empty buffer column. That is this button will purge empty columns except the buffer column. OR if ALL the columns are filled, Button2 will create the buffer column.
Eg. I click Button 1 three times. It creates four columns. I only fill two columns. When Button 2 is clicked it will delete all the empty colums except the buffer column. OR I fill in all four columns, there is no buffer column, when I click Button2 it will insert the buffer col.
Button 3 :
to add a row with every click. The button will create one extra row. So by design there will be at least 1 row. Example if the button is clicked twice it will create 3 rows. I just need a buffer row. (contains no data)
Button 4 :
to delete empty row leaving only one empty buffer row. That is this button will purge empty row except the buffer row. OR if ALL the columns are filled, Button4 will create the buffer column.
Eg. I click Button 3 three times. It creates four rows. I only fill two rows. When Button 4 is clicked it will delete all the empty rows except the buffer rows. OR I fill in all four rows, there is no buffer rows, when I click Button4 it will insert the buffer row.
In the sample file there are six columns filled with data. The 7th col is empty(the buffer column). The column after that calculates the average of data in filled columns. There are eight rows with data and the ninth row is the empty buffer row.
The "add" buttons must be able copy the format/formula of the column/rows BEFORE the buffer colums/rows and insert it before the buffer column/row.
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
View 2 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
View 9 Replies View RelatedIs it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
View 8 Replies View Relatedi am trying to access buttons like ' Format - Column - Hide'
View 5 Replies View RelatedI was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies View RelatedI need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
Does anyway to use a scroll bar to priortize a selected range?
I have included a simple example that I would like to rearrange with a scroll bar.
For example, I would want be able to select one row in the range and then place it either above the current position or any where in that range.
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies View RelatedI've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies View RelatedHOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
I have multiple Command Buttons on a spreadsheet that all require the same password when used. The password s contained in the code. Is there a way to have the password in hidden cell so if the password needs to be changed it can be change onetime and it will change all passwords. Below is the code I am using for the password.
Const strPass As String = "123456"
Dim strPassCheck As String
Dim lPassAttempts As Long, lCount As Long
Do Until lPassAttempts = 3
lPassAttempts = 1 + lPassAttempts
[Code]....
Is it possible to format the colour of a command button based on the value of a cell?
View 9 Replies View RelatedWhy code will not hide command buttons or worksheets based on a given password. I have attached the code so.
Private Sub Workbook_Open()
Dim strUser As String, strPassword As String
strUser = InputBox("Enter User Name")
strPassword = InputBox("Enter Password")
Select Case strUser
Case "O"
If strUserPassord = "O4" Then
ActiveWorkbook.Sheets("Main").Select
O.Enabled = True
GOODBYE.Enabled = True
S.Enabled = False
R.Enabled = False
A1.Enabled = False
A3.Enabled = False
A4.Enabled = False
Sheets("Set4").Visible = True
Sheets("Set5").Visible = False
Sheets("Set61").Visible = False
Sheets("Set63").Visible = False................
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
I have created a custom Command Bar called "My New Bar"
How can I step through each button in that bar to read the assigned macro names or the Caption names
Code to create buttons on a userform. I have adapted his code to do what I want. The code he gave me was:
[Code]....
In the Class Modules:
[Code] ........
All buttons when created are coloured yellow. When a button is clicked, it turns blue (to indicate that the button was clicked. However, my problem is that when another button is clicked, it also turns blue as coded. This means that both are showing blue colour. I want all other buttons to turn yellow and only the button clicked should turn blue.
I have a command button set up to gather information, then create a new sheet, and paste a copied button from another location to the new sheet. The command button that shows up on the new sheet is offset and not centered in the cell. It is centered in the cell where it comes from and the cells are the same size.
I noticed that if I copy a command button and simply paste it to a new sheet, it is offset just like this. I need it to not do this. If I have to make it write in a new command button and assign a macro to it, that is fine. I went with the copy/paste option to save time.
[Code] .....
Now, before it becomes an issue, this is only a part of the full code, but it is running in it's own conditional loop. The other part works fine. And I tried changing the alignment in the cell to see if that was the issue. It was not.
Copied command buttons are offset in the cells they are pasted to.
How do I Enable/Disable Command Buttons from a Sheet?
I am using a Command Button in a Sheet to copy and paste the Data from one Sheet to another with the help of macro..
As I am not well-versed with VBA dont know all the syntaxes of VBA.
I need help for the command button..
First and Foremost, I double click a Command Button form the Control tool-box and paste it on the Sheet, I dont know how to get the name of this command button , I mean where do i get it?
Based on a condition like a value in a cell I want it to be Enabled and Disabled?
Any ideas...please I am not able to follow even after googling a lot as I dont know what's the name of the command button control I have used.
If the value entered in a particluar cell is more than the 1000 difference between two cells then the command button should be disbaled...
The Application part:
The command button is used to transfer the data in a cell lets say $I$4 to another sheet Cell J2,J3,J4 so on so forth..by incrementing the ROW number.
Now The balance gets depleted with every new Debit Entry and we need to disallow the user from entering such an amount which will reduce the balance more than The Minimum Account Balance of a bank...