How do I auto fill a series of 2014 dates in the row below the weekdays? I have a row C5 that has a series of auto fill weekdays successfully for 2014. I can't seem to auto fill the weekdates in the row below. I have to make manual adjustments for each Monday, and for the correct month ends, etc.
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
I am trying to fill a row with abbreviated days of the week. example type Wed in cell A1 and cells B1 through Z1 change to the appropriate day Thu, Fri, Sat etc. I know how to do it with the fill off the menu but want to be able to change Wed to Thu and the same cells will change.
What I'm after is a sheet that self generates the day of the week in column A and the day of the month in column B. I have a month long sheet where daily entries get made in the DOW row, the day of the month is a reference. I have a macro to generate a new sheet for the next month and would like to auto populate the DOW and DOM. This typically gets done on the second day of the month (data from the first day is entered on the second)
Please see the attached xls file so see what I am referring to.
I have shipments that are going to different destinations (rotterdam, austria, london, etc.)
I would like to count the arrival dates in column H that fall under each week's span, but ONLY IF its corresponding value in column F is 'rotterdam'.
Column C contains the ideal numbers that I would like column B's formula to return. I plan on doing this for the entire year, but if someone can some up with a formula, I might be able to modify it for the rest.
Note: This is only an example spreadsheet, I am going to be referencing an external file with much more information on it.
In my current salary sheet "Days fill auto according to given months" from 1-31 as you can see in my attached salary sheet
Salary.xls
the Big problem is i want my salary sheet give dates from 23-22 for example if i select "January" sheet should display date from "Jan-Feb" starting from 23rd Jan to 22 Feb only.... and if I select February than sheet should display date from 23rd Feb to 22 March.... and so on
and if there any blank cell left in the dates area it will highlight it with RED auto as u can see in attached sheet.
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
I need a function where for a given date will return the date of a specified weekday in the previous week.
Example: If today is Friday Sept. 25th 2009 and I want to find the date of the Wednesday in the previous week I would need something like DATEPREVIOUSWEEK("09/25/2009", vbWednesday)
I am new to VBA & not sure of the full understanding of code copied from a workbook which worked on the same principle but with Monthly (12) tabs. I thought if modified to show weeks, the macro would be able to locate the current week tab & day/date within - but upon opening, the cell stops at WK19 & column O - rather than WK43, Column N (which changes daily).
I have a sheet that contains a number of documents entered into a system by a user. Each month those number of documents are average by the number of working days in a month.
I'm using this formula, =AVERAGE(C4,22)
I would have to edit this for each month with the number of working days.
Is there a way I can have this formula automatically find the number of working days in a month specificed and average it out?
I used a formula I found on this site to find the last friday in a month. = DATE(" & Str(iYear) & ",1+1,0)+MOD(-WEEKDAY(DATE(" & Str(iYear) & ",1+1,0),2)-2,-7)
Is there an equivelant date function that can be used when coding in vb (not within a cell.) The VBA editor does not recognize this. I believe it is because date is reserved for variables. If anyone can make this line of code work in vb so as I dont have to asign it to a cell in a worksheet you would be my hero.
I was wondering if there's a way to add a formula to calculate week over week % change automatically every week when I enter in new data. see the attached excel file for reference.
What I would like to have is the ability for the formulas in c5 and f5 to be able to auto-update to the newest week and the previous week's data instead of manually having to update it each week. So if I were to add a new row with data for week beginning 12/2, the formula in c5 and f5 would automatically update to calculate the week over week variance. I tried researching prior to asking the question on this forum, and I think it may be possible to do it using the index match function, but I'm not sure how to apply it in this case.
I know there's a pretty compley formula out there that counts the occurence of say Fridays in 2009 - does anyone have this? I had it before in a file but ranged valued the results showing the count of each day of the week for each month in a given year.
I have a column of dates: 1 day per row: 01/01/10, 02/01/10, 03/01/10, etc in sequence, without gaps (European date format). The list can begin with a different start date depending on initial user input and is not always a Monday. I want the user to be able to autofilter so that it only shows dates that fall on a Monday.
Private Sub Worksheet_Activate() Dim dDate As Date Dim strDate As String 'disable autofilter if already enabled With ActiveSheet .AutoFilterMode = False End With 'autofilter column a only, from a12, to filter Mondays If IsDate( Range("a12")) Then dDate = Range("a12") strDate = Weekday(dDate) Range("a12").AutoFilter Range("a12").AutoFilter field:=1, Criteria1:=strDate End If End Sub
I have a range (M6:BM6) which consists of week end dates = every Friday (M6 = 5/8/09; BM=5/7/10). I would like to have the range adjusted based on when a cell (B3) is updated. For example, currently B3=5/5/09 and M6=5/8/09 (week end date of B3). If B3 was updated to 5/12, I would like to have the range automatically updated to M6=5/15/09, N6=5/22/09....BM=5/14/10. I could do this with excel formulas in the sheet but would like to macro code adjust the values in the range rather than formulas.
These ranges are used in other macros and works better with values rather than formulas.
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
Basically I have 2 columns each with a list of dates in no particular order (and containing blank cells too), one planned date column and one actual date column.
What I need to do is plot this on a graph, and since the number of dates has no set limit and I dont want to have to plot maybe 100 dates on the x axis, so i want to group them by week before plotting them, i.e. 10 dates for week ending 10th jan, 25 dates for week ending 17th jan etc
I have a pivot table that counts how many of each date occurs, i.e. 10 x 2nd jan, 7x 3rd jan etc etc but it does not split them into weeks.
im sure theres an easyish way of doing it so i can get the 2 lines on the graph for no. of planned dates each week and no. of actual dates each week, i just cant see it.
I have a database that I export to excel every month. The export process is built in the database software (ACT!2009). The export opens Excel with the standard Book1.xls file name. All the field columns will be the same every month.
Goal: I need to format the spreadsheet to make it more readable and have been assigned the task of: 1 - Inserting a blank row between each row that contains data and filling in with color. 2 - Resizing the blank row to make it look like a "thick" border. 3 - Auto adjusting the columns to correct size. 4 - The last column contains comments and needs to be wrapped text. 5 - All of this needs to fit on 1 sheet (landscape).
Issues: 1 - Each month there will be a different number of rows. 2 - I know I can create a macro to do this but the macro that I would be creating will be in a saved template or spreadsheet. How could I use a that recorded macro in a spreadsheet that is called Book1.xls?
I have attached 2 spreadsheets. One called Book1.xls which is the raw data after exported and the 2nd spreadsheet called Formatted which is the end result that I am looking for.
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.