I'm making up a list of average scores across a season. I have an average column and I need to be able to deduct 10% from this average, then have excel ignore any scores below this new number and make up a new average (kinda like a handicap score).
I have columns for average (BD), 10% of this (BE) "ignore any score lower than"(BF) but Im not sure how to get excel to add up only the scores below the number in BF and make a new average column of only these in BG -
Last column would be to give each person a classification based on cutoffs (for instance 1-10=C Class, 11-20=B Class, 21-30=A Class etc etc). Is there a way to make "if BF=xxxx, make BH A, B, C etc?
I have a dataset consisting of concentrations of parameters (alpha and beta) at different locations over multiple years. I've included an example dataset here.
I need to calculate an average and standard deviation for each parameter that spans multiple locations and years (but not all locations and years).
Example 1: Calculate the average and standard deviation of alpha values from years 2009 to 2012 at locations A and C.
Answer should be: Average of {0.84, 0.47, 0.27, 0.14, 0.36, 0.65, 0.66, 0.85} is 0.53. Standard deviation of {0.84, 0.47, 0.27, 0.14, 0.36, 0.65, 0.66, 0.85} is 0.26.
The real dataset is large, including 7 different parameters and more than 30 locations. I need to perform these calculations for many parameters, so am looking for a formula (or array formula) that will do this in as little cells as possible. Can this be done by formula or will I need a macro?
I am a teacher creating a grade book in Excel. Each student is in a single row, with columns for the various assignments. For data analysis purposes, I am trying to develop formulas to make two different calculations.
The first calculation is simply the average quiz grade for all students, for all quizzes.
The second calculation is the average quiz grade for all grades that are higher than zero. This will tell me the average quiz score for quizzes that have actually been attempted.
I do need to track students that have withdrawn from the class, so column A will contain the letter "w" if the student has withdrawn from the class. If the student has withdrawn, the grades for that student should be ignored in the calculations.
Since I do accept quizzes after their due dates, a particular quiz score will have an entry of "L" if it has not yet been taken. These entries also need to be ignored in the calculations.
See the attached workbook for some sample data and the expected results.
I am trying to compile a spreadsheet for my job that will find an average of all the break times and meal times that all the employees take. I have the employee list and their respective timeclock punches for the week, so I took that and found their meal and break times for each individual day, but I'm having trouble when it comes to consolidating and averaging the data. The first column lists the employees, but their names are repeated depending on how many times they punched the clock that week, and since not every punch was a meal or break, my time columns contain a lot of zeroes that aren't needed. I need a way to just average each employees' meal and break times.
How can I do an average in Excel 2003 when it's not a range but I also don't want to count a certain cell when there's no data or zero? I have attached the spreadsheet.
I'm trying to average data for the past 3 years. My spreadsheet is setup like this.
Year, NameID, Salary, Average Salary
I have the spreadsheet sorted by NameID so most people in the database will have 3 entries right after another. How do I determine an average salary for the person across all 3 years?
I need the average salary to display across from the most recent date if that is possible as well i.e. if the latest salary date is from 2006, I would prefer that is entered into the row corresponding to 2006 and leave the 2004/2005 rows blank.
Also, some people might only have 2 years of data so keep that in mind as well.
Column A has approximately 50,000 rows with unique property parcel numbers. Column B has numbers that represent an elevation point on the parcel. The parcels are not level. The elevation of a parcel varies depending where one measures. So,...I have many rows with the same parcel number in column A but the adjacent column B shows a different elevation. Is there any way to:
1) remove all of the duplicate column A parcel number rows so I have just one column A parcel number row.
2) get the average of all the column B elevations to show up on the same one row?
I should only have approximately 15,000 rows if I could get rid of the duplicates and get the average elevation. I have version 2007 but I have to share with others who have version 2003. I don't know if that makes a difference but I thought I should mention it
I have received a task to do for school and I tried my heart out but I can't seem to figure this out. It's really simple but I can't seem to do it... I'm not very good with excel.
I have a spread sheet and it has a column in it with a drop down menu. The words in the menu are Hot, Medium and Cold. I want to have it tell me which one if showing up the most.
The organisation I wish to report on has many cost centres which each contain many people. These people are on many different grades, and each are on differing salaries (even those in the same grade).
One “reporting group” has many cost centres.
There are several reporting groups.
I need to report on average salary per grade / per reporting group.
I have attached some dummy data. The “rep group” tab displays the reporting groups and the cost centre mappings (ie reporting group England contains cost centres 1, 2, 3, 4, 5, 6 and 7). Note in reality the cost centres are not this simple, they are 6 digits and varying ranges.
In the “salaries” sheet each individual is listed along with their cost centre (in column c) and their grade (column d). Their salary is shown in E.
I have a column of data in Excel in the [h].mm.ss format. These values range from a few minutes to hundreds of hours. I need to get the average of these times.
My code is below. I'm getting a type mismatch error on the line that tries to add the time to the total. The line is in red. I've tried using a Integer, Long, Double, and Date as variable types for this particular variable. All with the same result.
I am attempting to find the average units of the last "n" weeks. I wish to input the required number of weeks in cell D20 which will show the average in cell D22. In this particular example, I have manually calculated using the average formula....
I need some help with a formula. I've tried daverage, cant seem to get it to work. below is an example of the spreadsheet.
A B C D E Date Name Project Score Pass? 5/1 Joe Test 55% No 5/1 Jan Quiz 88% Yes 5/4 Jon Test 100% Yes 5/9 Gary Test 75% Yes 5/11 Joe Quiz 90% Yes 5/18 Mary Test 45% No
Ok, I need a formula that I can execute from a different worksheet than the data is on. I need the formula to give me the average of the scores in column D for the criteria in Column C "Test". I tried daverage=(A1:E7, "Project", C1:C2) I cant get it to work. Do you guys know any other way to do this?
in Sheet1, i have 'part number' listed in column A and 'customer number' in column H. in column P, i have 'customer price' (for that part). so there are multiples of the same part numbers listed in column A.
in Sheet2, i have a summary showing totals for the parts (regardless of the customer), which includes SUMIFs for other columns such as pieces sold, etc. what i am looking to do is get the 'customer price' average by part (in column P/worksheet1) for each part on Sheet2.
I need to average out a set of numbers but the amount of numbers inputed will vary, these number can also be either positive numbers or negative numbers but will never be 0.
How do i do this and I would like this in formula terms?
Say cells a3,b3,c3 were the numbers that I want averaged but there is not always a number inputted in each of these cells. I want the answer to show up in cell a4
i've got a worksheet with 3 columns each declared, called date, place and avspeed I'm trying to average the avspeed if it falls under certain criteria within the other 2 columns.
The dates are in day format and basically I require the average over the week
If tried using =AVERAGE(IF(WEEKNUM(date)=45,IF(local=I4,avspeed)))
also declaring it as an array formula but both
also tried the following by summing and then counting the data and dividing one by the other, but so far neither are working
Trying to compute annual change I've always used the formula "(b1-a1)/a1" - where b1 is the current year, a1 is the prior year. I've been asked to compute average annual change over a number of years and thought simply by using the above for each year and then taking the average of all these, I'd be ok. I recently found a formula as follows: "(y2/y1)^(1/n)-1", where y2 is current year, y1 is 1st year I have data, n = the number of changes.
I have a spreadsheet,3 columns are shown in the attached.The first column gives the date of the event,the second column the time and the third a rating.I want to put the average rating for each event in each cell in column 4.
I would like to find the average of a column of data where the rows of data changes where my starting cell is always B53 but the end row of data can change after each simulation. The average function to be displayed at the bottom of the last row of data.
I read this thread which helped me very much. So I was able to link one drop down box to a list, which fills in the adjacent box. Now I need some help getting an average.
Ex. Drop down 1 has a list of names which applies the associated numerical value in box 3. Drop down 2 has a list of the same names with the same associated values, and I need these 2 values averaged and put in box 3.
The problem is that Drop down 2 doesn't always have a name. It may be left blank and so I need drop down 1 to continue applying to box 3 when drop down 2 is empty.
This is what I have for drop down 1 to apply to box 3.
One of our govt. agencies requires that I compute the 24-month rolling averages of the daily average input to a manufacturing process. In this instance, the agency is demanding the rolling average since 2003, so there are a fair number of data points involved. The process control computer can provide me the daily data (attached file contains 30 months of data), but cannot compute the 24-month rolling average.
column one containing ISO3 names of different countries. I was wondering if it's possible to have a macro that when i choosing some countries in different rows, it compute average value of them for any year in seven columns
I have a row of cells containing numbers, some of which are 0, how can i get an average where it averages all cells except the 0, as at the moment it is distorting my results.
I have two columns. The first is a timestamp that comes in 15 minute intervals. The next is a column of mostly zeroes with occasional peaks (I think of 10,000, but it could change). I'd like to average the peak value out over the range of zeroes before it. The peaks aren't coming at regular intervals.
I have a table that has a list of product names in column A and a list of product types in column B. Starting in Column C, each column represents a date for each day of the week. Each day of the week we run tests on our products to verify their quality. The result of the test is represented by a number. so column C has the test results for each product that was tested on 01/02/2013. Column D has the test results for 01/03/2013, etc.
I need to be able to average the test results of multiple columns for a given product type (column B).
