how to break the string into 3 variables.
Example: Given string is : -4.98e-005x^2+0.368x+0.0588
All the string there will be two + symbols.
I have to break the above string into 3 parts and store it into variables like
a=-4.98e-005x^2
b=0.368x
c=0.0588
breaking apart a string in a cell.
in cells A6:A112 my trial balance export from QB Online is account # [SPACE] Account name:Sub Account:Sub Account
eg. 70160 Administrative Expense:Travel & Entertainment:Travel & Ent.-Travel & Lodging
I would like to break the string apart so I have only account # in column "a" and the right most sub account name in column "b". So if I use my example from above, I would have 70160 in "a" & Travel & Ent.-Travel & Lodging in "b". Note all the account name & sub accounts are separated by ":"
i'm struggling with a formula to extract the folder names from a file path string i have in col A. I want to take the path value and for each "node" in the path place that string value in cols
Example string:
"pathfolder01subfolder2folder level 3level 4 folderanother folder for 5sublevel 06 folder"
In my example there are 6 folder levels in the path. I want a formula to "strip out" each level of the path string and put it in a seperate column.
Desired result:
A1 = pathfolder01subfolder2folder level 3level 4 folderanother folder for 5sublevel 06 folder
B1 = pathfolder01
C1 = subfolder2
D1 = folder level 3
E1 = level 4 folder
F1 = another folder for 5
G1 = sublevel 06 folder
Note - the folder names LEN is variable of course so a FIND or MID or ??? something else is needed....
I have a spreadsheet that has a column of text that is always 10 characters long. There are 10 rows of text so there could be 100 text characters if all rows are filled. The rows usually will not all be filled. There will probably be blank rows between used rows. I have been able to capture the text and put it into one cell as one long text which is ok but I want to be able to break it up into the 10 character strings again, separated with a comma and space between each 10 characters.
This is the code I used to collect the 10 character text strings and put them all together as the variable "result". I used & ", " after ... Cells(r,17) which worked fine unless there was a blank row. If the row was blank it put in a comma and space anyway so I ended up with duplicate(triplicate) commas and spaces.
Private Sub test_Click()
result = ""
For r = 5 To 32 Step 3
'If Cells(r, 17) "" Then
result = result & Cells(r, 17)
Next r
Range("r5") = result
End Sub
The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.
For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".
I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :
Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))
I need a macro that can take a sheet containing million rows and break it down into multiple sheets within the same workbork beginning on sheet 2 (source data on sheet 1). I would like the macro to include a input box that appears when the macro is run that asks "how many rows per sheet?"
View 2 Replies View RelatedI am herewith enclosing the sample data, which is one row, containing the branch name, branch code, itemcode, rate, qty, amount . Each branch has several items with different quantity of various rates, which has come in the horizontal line. Now I want that in one by one, for converting that data into oracle.
BR.NAME BR.CODEITEM CODEITEM RATE QTYAMOUNTITEM CODEITEM RATE QTYAMOUNTITEM CODEITEM RATE QTYAMOUNTITEM CODEITEM RATE QTYAMOUNTITEM CODEITEM RATE QTYAMOUNTxx1104.5100450153250750263.25158513.5394.5180810506.55003250result should be like thisxx1104.5100450xx2153250750xx3263.25158513.5xx4394.5180810xx5506.55003250
Is there a simple code I can add to the end of my macro that will break all existing links in the active workbook?
View 9 Replies View RelatedI have managed to capture a table from a website and currently have it going to range"a1"
Set mytable = IeApp.document.getElementById("maindetail")
Sheets("sheet1").Activate
Sheets("sheet1").Range("b1").Value = IeApp.document.getElementById("maindetail").innerHTML
Application. ScreenUpdating = True
What Id like to do is breakapart this data, remove the html tags, and place each element of the table in its own cell (a1, a2,a3 etc.). Anybody have any ideas, I'm just not familiar enough with the IE DOM.
I copied a worksheet with a pivot table as a new worksheet. I wanted to group each pivot table differently on each worksheet, but the changes I make on one worksheet is reflected on the other. Is there a way to break the "link" between these tables?
View 2 Replies View Relatedin COLUMN A i have text in one cell i need break this text in two cell COLUMN B and COLUMN C
[Code] ......
I have a workbook that is not showing everything that I would like it to on one page (but I know that all the information would fit onto one page (width) but I cannot seem to be able to change the page break. I tried following the directions in the "excel help" but just can't seem to get it to work. I have attached a sample workbook so that you can see what I mean.
View 2 Replies View RelatedBottom border each page,
View 9 Replies View RelatedI have a worksheet where the print area is 16 columns and ~90 rows. have it set to print on one page in page set-up, which generally scales to about 80%, and this has worked fine for years. A couple of months ago I was traveling for work, but got a call that the worksheet was printing each cell as a separate page. My co-worker messed around with it and it seemed to fix when she cleared and reset the print area, and has been working fine ever since.
Today it popped up again. It is setting automatic page breaks every few cells so page 1 is A1:A7, page 2 is A8:A11, etc...Both Print Preview and actually printing a page show me my few cells in the lower right hand corner of the page. Viewing the page break preview shows that they are all automatic page breaks, and if I try to move them I get the error that Microsoft Office Excel cannot move the page break because doing so would reduce the scale below the minimum 10%.
As I mentioned I have it set to "fit to" 1 page high and 1 page wide, which it right now is saying sets the scale to 10%. If I instead choose the scaling to be "adjust to" and set to 100% it only wants to take up 4 pages, but if I try to manually drag the break over afew columns it reverts back to wanting to print every few cells.
to have a page break by grouping id together, Heading need to be printed on each page. I have attached the sample file.
eg. the ID.
AAAAW0250H
AAAAW0250H
AAAAW0250H
AAAAW0250H
AAAAW0250H
AAAAW0250H
---- need page break ---
AAACA0314L
AAACA0314L
AAACA0314L
AAACA0314L
................
................
................
I have this code that is to long for the vba window so I read around and found I had to add a space and _ to extend the line.For some reason I get an error in the code when I do that?
However I copied the formula right from the working cell?
I have a spreadsheet that I have been using for some time.
Suddenly, in just the Worksheet_change event procedure, break points will not work.
In the same sheet break points do work for other events.
I've tried everything.
I have is a start rent date and an end rent date. They want to break down how many days in each month the item was on rent so they have a column for each month. For example say an item was rented on 12/14/08 and returned on 1/12/09. It was rented for a total of 30days 18 days in December and 12 days in January. So I would need a function in each column that would return a 14 in the December Column and a 12 in the January Column. there are over 350 rows and they are doing the process manually right now and taking several days.
Also I just noticed that the date range is currently entered as a text in the format 2008-12-14 so YYYY-MM-DD. Don't know if the text will be a problem.
Just attached an expample. In it I am trying to find a function to fill in the green cells.
I need to set the page break in my excel file. Basically what I need is for vba to check if the page breaks are a certain value (in this case Range("A150"). If they are not, then the code will set them to what I need.
The problem is the code is not working.
Code:
If ActiveSheet.HPageBreaks(3).Location Range("A150") Then
Set ActiveSheet.HPageBreaks(3).Location = Range("A150")
End If
I have copied from an email a very long list of emails but they all end up in one single cell
sample: eyee@gruposhahani.com; laroyeimport@gmail.com; sjimenez@vsjimenez.com; yhwh_shekhinah@hotmail.com; sparcells@formatec.com.pa
and would like to know if there is a way I can quickly create a list separating each email into a different cell. I was thinking of using a MID formula or maybe an INDEX or MATCH, but cannot figure out how to make it work.
I'm looking for syntax to break all links in a workbook using VBA. I've found the below through independent research but I'm receiving a type mismatch error.
Code:
Sub BreakLinks()
'Macro Purpose: Break all links in the active workbook
Dim vLinks As Variant
[Code].....
Taking the following as an example, where you find yourself in an infinite loop. How can you interrupt the sub and keep the code. All because you where to stupid to save it before running it.
Sub TEST()
LabelA:
****MsgBox "YOU IDIOT"
****GoTo LabelA
End Sub
I would like to put a page break everytime a column value changes. Example:
A
Atlanta
Atlanta
Atlanta
Page Break
Boston
Boston
Page Break
Chicago
Chicago
I have a spreadsheet with agents schedules. What I would like to do is to break down the schedules to determine how many hours are worked between different times. This is what I have: C7:C11 is Sunday Start Times D7:D11 is Sunday's End times. The sheet does Sun-Sat. so Saturday ends at Q11. I want to find out how many agents work from 6am-10am, 10am-12pm, 12pm-2pm, 2pm-4pm, 4pm-6pm, 6pm-8pm, etc. I was originally trying to use a sumproduct but had some problems getting it to work. This is what I was trying: sumproduct(--(C33:C40>=(0,0,0)),--(C33:C40
View 9 Replies View RelatedIs there a way to insert a line of code that, once all workbook open code has completed, will count for 5 seconds and then perform another piece of code?
example,
Once my workbook opens - i would like a message box to appear 5 seconds after.
I have macros that then run through and hide all unnecessary questions and paste the selection to another work sheet.
what i need next is the issue.. Because the questions vary in size ( row height) and include blank cells for comments, i can not come up with a macro to print with any conformity
What i have come up with is that after all this is said and done, i would like a macro to print only 32 rows per sheet ( portrait) , then have a page break.
I've got a file that is currently linked to two other files. The links are summed in the cell as below:
='[Book1.xls]Funding and Interest'!D$17+'[Book2.xls]Funding and Interest'!D$17...and so on.
I want to get rid of the link to Book1, so I'd zeroed the values in Book1 and my plan was then to Break the links to this, leaving zeros and the links that I want, but because both files are linked in the same cell (the same nested SUM), when I go to Edit, Break Links, it breaks the links to both files, even though I only select one form the list.
I have a report which is produced by a macro, it works well. The report grows over the year to maybe 20 printable pages, landscape, and nicely readable.
Summary information is produced alongside the report over more columns than can be diplayed, so I have copied the summary data as a picture and pasted it below the main printout and adjusted the size of the "photo" to fit the page width.
I would like this photo to always appear on a new page of its own - not just tagged onto the pages before it.
I couldn't find a solution to where I'm at now, but Derks formula...
= SUMIF($J$5:$J$44,J5,$K$5:$K$44)/COUNTIF($J$5:$J$44,J5)
from...
excel formula
...Almost gets what I need, but my data will not always be in a high/low descending order. I'm braindead; I can't think of how to make this formula work.
I have looked and found a few solutions for the "enable macos or show a warning sheet" The one that seems to work the best is Ozgrids Enable Macro under the free downloads section. However I seem to have been able to break it, and thats been my problem.
When you run EnableMacro program and you select "Disable Macros" it displays the page with the yellow box, good. However when you click "enable Macros" and it opens normally, but when you save it in that fashion, this is where it breaks.. now open it again, and select "disable macros" and the normal warning sheet doesn't open. I incorporated this program in my project and it works, until the normal exit save of the program and after the 1st save, it doesn't work.. any