and would like to know if there is a way I can quickly create a list separating each email into a different cell. I was thinking of using a MID formula or maybe an INDEX or MATCH, but cannot figure out how to make it work.
There are basically four fields of text (date, trans. #, merchant, $ amount) all in one cell that I would like to have in 4 separate columns without having to cut-paste, cut-paste, cut-paste. Is it possible for me to break this information up quickly into 4 separtate columns? I have about 400 lines of text like this and would like to find a faster way to do it.
I have an email contact list with over 100 people in it. They are all in the same cell and are separated by semi-colons. How can I tell Excel to create a new cell every time there's a semi-colon?
In other words, after all is said and done, I should have over 100 separate cells with only 1 email contact in each cell.
I need a formula to insert a line break after every 42 characters in a cell , example if there is 266 characters in a cell there should be 6(266/42)line breaks.
=REPLACE(REPLACE(A1,42,0,CHAR(10)),84,0,CHAR(10))
I tried this but i am not sure how to get the start num to change to 126,168 and so on
We do large loads of new part #'s/descriptions/UPC's/etc from excel into our database. The fields are limited on character count and I would like writing a formula to break the contents of a cell based on character count without breaking a word.
Examples
Column A Current Data Row1: 12Pt HD Offset Striking Wrench 1-3/8" & 35MM (44 characters) Row2: 12Pt 1/2" Drv Socket 27MM (25 characters) Row3: 12Pt Satin Combo Wrench 11/16" (30 characters) Row4: 12Pt 1/2" Drv Deep Socket 1-1/8" (32 characters)
Results I'm Looking For
Row1: Column B-12Pt HD Offset Striking Wrench Column C- 1-3/8" & 35MM Row2: Column B-12Pt 1/2" Drv Socket 27MM Column C-No Data Returned Row3: Column B-12Pt Satin Combo Wrench 11/16" Column C-No Data Returned Row4: Column B-12Pt 1/2" Drv Deep Socket Column C-1-1/8"
Formula to split a cell at the first break/space and to keep the rest of the cell contents together? For example to separate addresses from the street and street name.
Eg.
A1 1111 AAAA BBB
into
B1 C1 111 AAAA BBB
I have tried to use text to columns but as the cell contains three or four words I don't want to have to rejoin cells afterwards.
I have a cell in excel that has 5 lines of text and I would like to count how many characters there are in each line of the cell. Is there a formula/macro to count them?
I'm trying to automate a very laborious process where text data is taken from a series of cells in excel 97 and is turned into HTML tables - I've got it all working except for one thing, when I extract the contents of the text the paragraphs are lost and are merged into one long piece of text - obviously I need to insert <br /> characters where the paragraphs are to get this working. how I can extract text from with some kind of marker for the paragraph sections? Or is there a way to insert characters where the excel cell has a paragraph mark (ie a return key has been pressed).
The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.
For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".
I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :
Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code: Option Explicit
'Form level variables - used in more than one event Dim intAdult As Integer Dim intStudentSenior As Integer Dim intBalcony As Integer Dim intChild As Integer Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables Dim intCount As Integer Dim i As Integer Dim intAdult As Integer Dim intStudentSenior As Integer
i want to break content of my cells in excel into lines. Normally it is done with [ALT] + [ENTER]. How can i use find and replace(or other method) to break contents of all cells where "µ" exist. I MS word that is pretty easy but i dont know how to do that in excel!
I have a cell that has data like the following: ab 4111 / nw 2652 / ev 8741 up to 5 or 6 entries in the cell. If I just want 1 of these entries say the ev 8741 how can I have that be the only data that remains in the cell?
I'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize() Range("D2:D25").Select Selection.Copy Sheets("Pot 2").Select lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row Range("H" & lMaxRows + 1).Select Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _ False, Transpose:=False Range("D25").Select End Sub
I have spread sheet with 2 tabs (MASTER LIST & CYCLE COUNTS), on each tab I have 2 columns(LOCATION1 & DATE1 and LOCATION2 & DATE2) I need to verify if I any cell from LOCATION1 is repetead on LOCATION2 and copy the informacion from DATE2 to DATE1. then if I update the CYCLE COUNTS sheet I want the MASTER LIST update by it self.
This is the formula that Im using but Im having problems with the range..... =if('Master list'!$A2$:$A$15000='Cycle counts'!$A2:$A$15000, 'Cycle counts'$B&2:&B&15000,0)
And what I want to do is use this information further down in my excel-sheet. So whenever I plot in "Location 1" I want "Security" and "John Johnson" to magically come automatically.
I have several thousand cells where I need to pull out some information at the end of each cell. So for the examples listed below, all the information resides in the "A" column. For example:
M55116/14-5 CONN,RECEPT,6 PIN,U-228 TYPE B EA A AS 17 85.00 1,445.00
M39029/30-222 CONTACT,#0,RED-RED-RED B EA A AS 96-0327 46 6.75 310.50
M39029/44-288 CONTACT B EA A AS 93-0852 400 2.18 872.00
I am trying to pull off (starting from the end) all of the information to the first space. So I would like the following results returned: 1,445.00, 310.50, and 872.00. Can anyone recommend if there is a Function or equation that I could use that would pull everything from the end of the cell until the first space?
I receive a workbook on a monthly basis and it arrives in csv format. I need to format it and split it into several pages prior to sending to managers. I'm comfortable with the vba for formatting and splitting it into several pages but I have a problem with some cells that always have data in them in the same (incorrect) fashion.
how to go about fixing these cells and then I can get on with writing that into the macro.
Currently looks like:
A || B || C No requested || No Supplied || Percentage 4 || 4100% 12 || 875% 6 || 350%
Should look like:
A || B || C No requested || No Supplied || Percentage 4 || 4 || 100% 12 || 8 || 75% 6 || 3 || 50%
I was thinking of some kind of Left() formula to extract the leftmost character and place it into it's new cell BUT realise that sometimes I might need to extract 2 (or perhaps even more) characters.
I'm trying to extract information from one specific cell, and place it into another. This other thread kind of does what I'm looking for. I wish to extract from the following; "20/04/2009 5:42:51 AM". Placing the date in one cell, and the time in another. All spacing within the quotation marks is respective of the cell. Obviously dates and times would vary.
I can’t seem to work out how to pull data relating to a particular title from one spreadsheet, to another, separating the information on.
For example, column A lists names, and column B lists tests scores for each person. However each person has done several tests, and the tests are listed in one cell, separated by a carriage return (not comma etc, so can't do a delimited function).
I want to create a new spreadsheet with names still in column A, but the test scores separated. So Column B = Test one, Column C = Test two, Column D = Test three, etc. In each column I would like only the test score listed (so not the test title - I will put this in the first row as the column header)
Is it possible to pull only certain information out of a cell?
I have in cell A1 (As of 6-30-12 and 5-31-12) i would like to put a formula in cell b1 to pull just (6-30-12 and 5-31-12) so that everything i change A1 B1 will also change.
