Breaking Links To Some Workbooks

Jan 14, 2010

I have a consolidation workbook with many tabs. Each tab has many links to 8 data workbooks.

I would like to eliminate the links in all of the tabs of the consolidation workbook to half of the data workbooks.

I am using Excel 2007.

I tried Data/Edit Links, and selected one workbook, but when I hit Break Link, it broke the links to ALL the data workbooks.

View 9 Replies


ADVERTISEMENT

Links Breaking From Two Workbooks

Dec 18, 2013

For three years I've created a workbook (A) that is dependent on another workbook (B) I upkeep. When I open (A), I Edit Links and update the location to my newest weekly file to map from (B). For my 2014 (A) book, I did the same process, but when I update the values, all the links break. Only when I open up (B) with (A) will the values appear.

As a short term solution, I saved (A) with the values in there and disabled the prompt to update values, so others can see the data. This isn't a feasible long term solution since updates will be made weekly, and not everyone will want to open up (B) just to update (A).

View 9 Replies View Related

Links To Other Workbooks Breaking When The Files Are Replaced?

Jun 12, 2013

I have a master workbook (that I will call 'A') with a number of links to other workbooks ('B' to 'Z'). 'A' is designed to collate and display the data held in workbooks 'B' to 'Z'. The links all work fine until the 'B' to 'Z' workbooks are updated with new data, at which point, the links break with a "Error: source not found" error.

This is caused by the process by which we update the 'B' to 'Z' workbooks. We have to delete them, and replace them with new files, that have the same name.

Is there any VBA code or something that I could run that will update the links to pick up the new files?

View 2 Replies View Related

Breaking Links And UsedRange

Jun 23, 2006

I am working on a project that involves copying data from one sheet to another, then breaking all links to the original sheet. This part of the program is working fine. The problem comes when I try to put borders around the used range of cells in the new sheet. I want the border to only go down to the last row that contains text in column A.

Currently, the program is putting a border around all the cells that have text plus those that originally contained links (all the links are not always used). So even though I have removed the links from the new sheet, usedrange still includes these extra rows. This is no good for printing, since the links spill over to page two and I dont want that second page to print if there is no data.

So I basically need to know how to fix the problem with usedrange, or instead need a way of specifying the last row that contains text in column A. I have done a search on this and tried a number of different things, however none have worked so far.

View 9 Replies View Related

Refreshing Lined Cells And Breaking Links

Oct 25, 2011

I would like to refresh all external links to other xl files (on a network drive) and break all links

I have a code like this:

Code:
For Each l In ActiveWorkbook.LinkSources
Workbooks.Open Filename:=l, updatelinks:=1, ReadOnly:=True
ActiveWorkbook.Close False
Next l

For Each l In ActiveWorkbook.LinkSources
ActiveWorkbook.BreakLink l, xlLinkTypeExcelLinks
Next l

It seems to be working, but if i go step by step (f8) it updates values but sometimes after closing the source workbook and updating next one, the previously updated values disappear...

I cannot open all files because there are many of them and they are like 40mb each.

There are no defined names in the file, except print_area

View 2 Replies View Related

Excel 2010 :: Breaking Data Links To Another Workbook

Oct 18, 2012

I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.

View 3 Replies View Related

Update Links Across Workbooks

Jun 6, 2007

I have a Vlookup in a shared workbook looking in another shared workbook for the data I want. I open the file and click "Update Links" but I then get the following message box:

"This workbook contains one or more links that cannot be updated.
-To change the source of links, or attempt to update values again, click Edit Links.
-To open the workbook as is, click Continue.

I know this message is trying to tell me it can't find my links, but the path/workbook/ sheet are correct and the numbers are getting updated. I'm worried the message will deter the other users of this workbook from allowing the use of the vlookup.

View 9 Replies View Related

Several Links To External Workbooks That Cannot Be Found

Nov 15, 2006

I have several links to external workbooks that cannot be found...

I have deleted all Name references that posses a ref#

Also I have tried to change the source to the workbook that I am using, but I keep getting a message that says invalid reference to external workbook! In other words it won't let me change my source

I have several work books that I want to change there source, or even get rid of because I can't update them anyways and I don't think it matters if they are updated!

View 9 Replies View Related

How To Update Master Workbook With Links To Other Workbooks

Dec 10, 2009

I have a workbook that links out to numerous other workbooks for current data. After one of the supporting workbooks gets up dated, I return to the master workbook.

Here, I need to see the updated results. The only way that I can find a way of updating the master is to close and save it and then re-open.

Is there a way of updating the master workbook using a macro?

View 14 Replies View Related

Excel 2007 :: Updating Workbooks Containing Links To Other Files

Sep 12, 2010

I and my organization have many files created using Excel 2003. I have now upgraded to Excel 2007 and soon I discovered a huge problem.

- When opening a file using Excel 2007 that was created with Excel 2003 the links in that file is automatically updated even though I get the edit links dialog and choose not to update.

After searching for a solution on the Internet I realize that this is a problem that exist when Excel opens a file created in an earlier version. Microsoft has no solution.

I need to be in control of which links that are updated and not.

Going back to excel 2003 is not an option. Saving the source files in Excel 2007 is not an option.

View 5 Replies View Related

Break Links Of Number Of Workbooks To Master Workbook?

Aug 8, 2013

I have several hundred workbooks which are linked to a master workbook from where the workbooks draw their information. Now I would like to break all the links in all of the several hundred workbooks to this master workbook and retain the information. Is this possible without having to open each workbook individually and break the links via the 'edit links' option?

View 1 Replies View Related

Links To External Workbooks And Server Drive Selected?

Aug 7, 2013

I have a workbook that is being used by many individuals. Within it contains links to an external workbook on a server. Currently the links in the workbook map the server to drive "T".

If a different user maps the same server to another drive letter, I assume these links need to be updated with the drive letter he/she is using for that server?

View 1 Replies View Related

Excel 2013 :: Updating Links To Separate Workbooks

Sep 12, 2013

I'm linking some data from 2 workbooks in the same folder (using excel 2013)

I have a main rota that works great, called "Main Rota.xlsm" I then have a separate basic file called Email Rota.xlsx without all of the bells and whistles of the Main Rota, purley made to email out to staff.

I store both files in the same folder "Site Rota" and it works fine.... until I rename the folder or move the folder to my laptop.

The link in the Email Rota looks like so to start (calling cell A3 from the Main Rota) ='[Main Rota.xlsm]Planning Rota'!A3

As I said it works fine until I move the folder onto my laptop the link then changes to

='D:DesktopSite Rota[Main Rota.xlsm]Planning Rota'!A3

And I have to keep updating the link, I have read online that it isn't supposed to work like this and its supposed to read the file "cleverly" in the same folder ?

I would ideally like to keep both files in the same folder and to update from visa versa without having to update the links if I move it from PC to laptop with I do daily .

View 1 Replies View Related

Edit Links - Break Links Not Working?

Jun 22, 2012

I have an unwanted link and I can't remove it. I have tried through the Edit Links dialog box, searched for [ in formulas throughout the workbook and gone searching manually for the reference but to no avail.

View 9 Replies View Related

Breaking A Tie

May 24, 2009

I have scores for golf teams that I have ranked. When there is a tie, I wish to break that tie based on another number.

For example, 2 teams tie for 1st place with a score of 312 from 4 golfers. I wish to rank those scores based on a 5th player score and determine the winner to be ranked 1st and the next 2nd without disrupting the ranking order of the other teams.

View 5 Replies View Related

Breaking Up A Number

Jan 4, 2010

I have a number in one cell which is between 1 and 15 inclusive, and I want to break which ever number is chosen into the sum of 1,2,4 and 8, with each digit displayed in a separate cell. In the remainder cells if any are blank I would like 0 (zero) to be displayed

e.g.

15 ----> Cell 1 = 1, Cell 2 = 2, Cell 3 = 4, Cell 4 = 8

or

9 -----> Cell 1 = 1, Cell 2 = 0, Cell 3 = 0, Cell 4 = 8

Using the numbers 1,2,4 and 8 there is only one way to sum each of the numbers 1-15 inclusive. The results of the 4 cells I'm using an if statement to display an "x" next to an option.

View 10 Replies View Related

Breaking A Cell Down

Apr 3, 2007

I was wondering if there was a way to break down a single cell with it's componets.

For example, if cell A1 has a sum formula containing the sum of other cells, is there a was to just copy the single cell (A1) and pasting all of its different values to multiple cells?

Like, A1 has 100 in it but it is sum up by 4 other cells each @ 25 each, so is there a way to copy A1 and pasting it to different cell to show each entry?

View 9 Replies View Related

Breaking Out Of Run Away Code

Jul 5, 2006

I am in the middle of designing a macro that has 5 or 10 times ran away with itself causing me to sit & wait for it to finish. I am hoping there is a graceful way out of this without going to office application recovery.

View 2 Replies View Related

Breaking Number In To Decimal?

Apr 2, 2014

I'm looking for a formula to break number in to decimal . Which means for 5 digits i.e 12555 to 12.5 and 4 digits i.e 1555 to 1.5

View 4 Replies View Related

Breaking Data Out Of A String

Apr 1, 2009

I have strings of data pumped out of a database like so "!OV !IPV ABL (850) !VL SM (150) !AD !PW !QT CC (-350)" If an exclamation point is listed, then no value follows however if no exclamation point is present, then each item will be followed by a value. I am trying to break this data out into a table. I am not sure if this is even possible. I am also attaching an example.

View 5 Replies View Related

Breaking A Table In To New Sheets

Nov 4, 2009

I was just wondering if there was an easy way to split several rows of a sheet in to their own worksheet? Right now I have a workbook with one worksheet which looks like: ..........

And so on. Every little block signifies a different product, so in this example R1 and R2 are for one product, R4 is for another product, R6:R8 are for another product etc.

So I was wondering, can I have a function which gives each product its own worksheet and names the worksheet the value in Column 2? The number of rows for each product (and the number of products) is variable but the number of columns stay the same and there'll always be one gap between each product. This isn't an essential can't-live-without thing, right now I'm just cutting and pasting, but it would be nice to have everything automated.

View 4 Replies View Related

Keyword, Matching And Breaking Up?

Jan 14, 2010

I have a work sheet called 'Cross Ref data' which I want to put a keyword in column A (row 1,2,3,4,5,6,7,8 etc)

I then want to be able to run a macro that will grab the contents of A1 in WS called 'Cross Ref data' and check if it appears in column D and E in WS 'Results'


If there is a match then for the entire line within WS 'Results' be copied to a WS that already exists called "Cross Ref Results" (please see the below heading '88888***********8888' for the layout) .........

View 14 Replies View Related

Breaking Apart Street Addresses

Jan 15, 2010

Sheet1, Column3 is filled with property addresses, if available (some are blank). I need two columns on Sheet2, Column3 needs to be the street number and Column4 needs to be the street name.

Because it is not 'fixed length', I can't use 'RIGHT' or 'LEFT'

I have attached a sample file. There is other data/information on the sheet, but I can process the rest without help. I will be moving:
Sheet1, Column1 to Sheet2, Column2
Sheet1, Column2 to Sheet2, Column1
Sheet1, Column3 to...as described above...

View 14 Replies View Related

Hyperlinks Breaking All The Time

May 29, 2014

I have an excel table with over 130 sheets in it. The first 20 sheets I have a list of names(the sames names) to collect different types of information of them. From the sheet #21 until sheet#135(more or less) I have the person sheet (each sheets has their respective name) to collect even more information for each names from the list mentioned before from the first sheets. I already created hyperlinks on the first 20 sheets (sames names) that way from there I can go straight to the individual sheet. The problem is that every day I have to correct a few hyperlink because for some reason breaks. I got this error message "Reference not valid", therefore I have to edit the hyperlinlk and connect it again. Even if I save it, next day is another or the same one.

Any alternative way to create hyperlink besides click on Insert - Hyperlink - click on the name of the sheet? Could I do it using macros, visual basic or something and if I can, how to do it.

View 8 Replies View Related

Breaking Up Data In A Cell

Mar 11, 2008

I have a spreadsheet with part numbers containing letters and numbers. How can I break up the part numbers to insert dashes between any letters and numbers? (example: FXF3100LA01 needs to be FXF-3100-LA-01) There are approximately 17,000 part numbers on this sheet.

View 10 Replies View Related

Breaking Up An Address Block

Mar 18, 2008

I have another question. When address come through our DB into Excel, they are in one big block. In other words the city and state and zip are in a lump with the street address. Text to columns does not work because it does not break up the text consistently. What can I do?

View 9 Replies View Related

Breaking ColA Into Sheets.

Aug 13, 2008

data below is in sheet1. Upon pressing a button, it'll break into
can this be done? data means any number of columns with data.

sheeta:
row1: a---001-data
row2: a---002-data

sheetb:
row1: b---005-data

sheetc:
row1: 003-data
row2: 004-data

a----001-data
a----002-data
b----005-data
c----o03-data
c----004-data

View 9 Replies View Related

Breaking Up A Cell Of Data

Nov 15, 2006

I have a cell C2 that has the following data in it

C2= 4 Farmstead Way

I want cells

C3= 4
C4= Farmstead
C5= Way

View 2 Replies View Related

Breaking Ties In Rank Function

Jun 21, 2014

I am trying to break ties in the Rank function.

Example worksheet attached.

I have an eight digit number (a digit can show up more than once) and determine the rank of the sum of each number. I had the ties broken by whatever digit showed up first.

In the following example, June 13th row showed 6 digits tied for second place and the tie was broken by the order in which the digit show up in the range.

On the June 14th row it showed digit 4 and 5 tied with 3 occurrence each (running total for the two days). But digit 4 came in twice that day, and reach a total 3 first before digit 5, but Rank2 shows that digit 5 was ranked first, which should of been digit 4.

View 14 Replies View Related

Run A Macro Without Breaking Cell References

Dec 2, 2008

I have a macro that cleans up data on one sheet, text-to-columns, flip rows of data, etc. Another sheet references the cells AFTER the data has been cleaned up. However, I can't put the cell references in from Sheet1 to Sheet2 before I run the macro because it breaks the references.

Just a simple example, Suppose cell A1 contains the formula: =Sheet2!B5.
If I go to Sheet2 and run the macro to clean up the data, when I got back to Sheet1, cell A1 contains: =Sheet2!#REF!

The idea is that this is a template, and the user can input aggregate data, run the macro to clean it up, and then go to the other sheet. I can easily create the macro to add copy/paste between the two sheets, but I'm looking for a cleaner way to do this.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved