Case-Offset
Dec 10, 2009
I Looking for VBA code For the Below Cases:
Please Refer the below file.
Sheet1 *ABC1CatcityDate2Achennai12/10/20093Bmadurai12/10/20094Bthenai12/10/2009 Excel tables to the web >> Excel Jeanie HTML 4
If cat column states "A" i want to add Amount and value in sheet 3.
Sheet2 *ABCDEF1A *B*2Amountvalue*Amountvalue*31001*8001*42001*9002*53001*12002*64002*15002*75003*18005*86004****97005****108006**** Excel tables to the web >> Excel Jeanie HTML 4
Note : Every catgeory have chances to add Amount and value.(Example A cat Total count 8 but there is a chances to add or deleted 1 or 2 Row)
Answer:....
View 9 Replies
ADVERTISEMENT
Aug 26, 2009
I have a string of names that run together without spaces or commas between each name.
"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.
Is there a way to add a comma and space between a lower case and upper case letter?
View 7 Replies
View Related
May 8, 2008
Sub Addy()
Do Until ActiveCell. Offset(0, -4) = ""
Renamer = Proper(ActiveCell)
ActiveCell = Renamer
ActiveCell.Offset(1, 0).Select
Loop
End Sub
fail? Trying to remove all capitals from names/addresses. Error message is "compile error - sub or function not defined"
View 6 Replies
View Related
Jun 3, 2009
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
View 9 Replies
View Related
Apr 22, 2009
I decided to try to change it into a Case Statement. Here is what I have now. But the problem seems to be this time at this line: When I have "01" in C5 the script just keeps going?
View 14 Replies
View Related
Jun 20, 2008
When I use a simple formula such as:
=upper(a1)
that will obviously change whatever is in a1 to Upper Case - but it will put it in the cell that holds the formula.
What I want to know is:
Is there any way I can format the cell to run the formula when the information has been pasted into the spreadsheet
View 9 Replies
View Related
May 31, 2014
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
View 3 Replies
View Related
Nov 1, 2006
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
View 9 Replies
View Related
Jul 20, 2006
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies
View Related
May 15, 2007
I'm trying to compare two range values within a macro to see if they match...if they do/don't I capture and write some other data.
One list is lowercase, while the other list is UPPERCASE.
My current macro needs them to be in the same case because I'm using the following to compare:
If VPNID.Value = BuildHRName Then
How can I change the format of one of the lists to UPPERCASE or lowercase so that I am comparing apples to apples?
View 9 Replies
View Related
Nov 17, 2009
if there's any way for vba to detect if each individual character in a string is in caps, and if so, convert to lower case, and if it's in lower case, convert to capitalized
The text will vary in length and content... so he wants to see how we can change:
"This Is Strange" to "tHIS iS sTRANGE"
"THIS IS STRANGE" to "this is strange"
"this is strange" to "THIS IS STRANGE"
View 2 Replies
View Related
Oct 26, 2008
I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
View 7 Replies
View Related
Mar 22, 2013
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
View 2 Replies
View Related
Aug 29, 2009
I have 14 Case instead of multiple IF's
one by one 52 cells will be selected and will act on the 14 Case
Can I name the 14 Case as one and not have to end up with a mile long code?
Example:
Select Case Grade
Case Is >= 90
LetterGrade = "A"
Case Is >= 80
LetterGrade = "B"
Case Is >= 70
LetterGrade = "C"
Case Is >= 60
LetterGrade = "D"
etc...etc...
Case Else
LetterGrade = "Sorry"
End Select
would become:
Select Case test
End Select
View 9 Replies
View Related
May 5, 2014
I want to fill up specific text to cell according to values in columns before. I wrote this, but it doesn't work:
Sub test()
Dim Lastrow As Long
Lastrow = ActiveSheet.UsedRange.Rows.Count + ActiveSheet.UsedRange.Rows(1).row - 1
Dim i As Long
[Code].....
View 2 Replies
View Related
Jul 3, 2008
I know the concept of Case statements sounds simple, but trying to write it in my scenario seems a lot more difficult than I thought it would be. I have three columns with an unspecified number of rows (which are generated from another macro). Lets say those colums are C, D, E, and they should be strings because my criteria are based on the number of digits contained in each cell. I want to add a certain number of periods to a given cell, then add that string onto two other cell strings, and form one combined string in a separate cell.
Basically I want to sort of Concatenate the cells into a given cell in column F for each row, but there are many conditions. If the cells in column C contain 3 digits, I want to add one period "." onto the original string. If it has 4 digits, then I add nothing, and then, add that cell to the string in cell D, and then Cell E. [It is like the function Concatenate(C1&".",D1&"..",E1)]. Cells in Column D have 6 criteria, and cells in Column E have zero criteria.
And I need this to loop down until it reaches an empty row or cells.
View 12 Replies
View Related
Feb 17, 2012
Is there a way to do multiple case selects. For example if I have A3=2012 and A4=COMPANY NAME do this. I don't want to use if and for this because I have several company names in this list and think case would be easier. So far I have the following attached code but this pastespecial should only occur if the value of A3=2012 as well.
Code:
Select Case Cells(i, 1).Value
Case "COMPANY NAME"
Range(Range("B" & i), Range("E" & i)).Copy
Sheets("Abbott Label").Select
Range("b45").PasteSpecial
View 9 Replies
View Related
Oct 24, 2008
I have the following:
Column A---------Column G
EACH-------------(Formula = (B1*C1)*.4536
CASE-------------(Formula = (B1*C1)*.4536
SHTB-------------(Formula = (B1*C1*D1)
SHTD-------------(Formula = (B1*C1*D1)
MFG--------------(Formula = B1*C1)
NO---------------(Formula = B1*C1)
I need a macro that when the worksheet is open if the text in Column A is as presented in the sample then the Mathmatical calculations will be performed in Column G. Currently I use a Do While Loop which works (takes a long time), but I know there must be a faster more efficient way.
View 9 Replies
View Related
Nov 27, 2008
I am entering a list of usernames in a spreadsheet and some are in different cases.
When I am trying to enter 'FDante' for example, excel keeps changing it to 'Fdante'
I have tried formatting the cell and was even going to try vbcode to resolve this but I assume there must be a simple option that I have overlooked.
View 15 Replies
View Related
Dec 19, 2008
How to I change this code to use 'select case' instead of using IF? I have about 20 more if's and I though select case may be easier . .
'20
If ComboBox8.Value = "20" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:aq16,""X"")=20),""Reject"",""Accept"")"
End If
' '19
If ComboBox8.Value = "19" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ap16,""X"")=19),""Reject"",""Accept"")"
End If
' '18
If ComboBox8.Value = "18" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ao16,""X"")=18),""Reject"",""Accept"")"
End If
View 9 Replies
View Related
Dec 11, 2012
Regarding the below code:
VB:
Sub AutoPopulate()
Dim i As Long
Dim lr As Long
Application.ScreenUpdating = False
[Code] ....
This code relates to a list I have determined on my excel spreadsheet using a range from another sheet in my spreadsheet.
Basically this is a standard group of domains I want people to use, but based on where the user will use this there may be local variations for example amount, some people here use UKDW amount at 15, 2.
As this is a global project the above is the global standard I have set out. What i want to do is if people in the UK want to add there own values so UKDW for example they can do but assign a macro to a button that will add this to my range on a seperate sheet but also will add another case to the macro above.
So if someone entered UKDW_AMOUNT as DECIMAL 15 2 then clicked "Add to Domains" Button this will add UKDW_AMOUNT DECIMAL 15 2 to my list on a seperate sheet but also update my case selection macro.
View 2 Replies
View Related
Mar 1, 2013
I have written the following code. I've made the code that works look like a comment. The code should delete rows 1 to 4; Insert a column and in column B sum the row to the right. Right now B1 is correct but it stops there. I've tried coding this as an if then else statement and the same thing happens.
Data:
A
B
C
D
E
F
G
B206
5
1
1
1
1
1
[Code] .....
VB:
[SIZE=2]Sub GetFlyingDays()[/SIZE]
[SIZE=2]Dim Names As String[/SIZE]
[Code].....
View 1 Replies
View Related
Aug 6, 2014
I'm fairly new to using VBA and have come into what is probably a simple problem to solve. However, I am looking to sort out my code.
VB:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Cells.Count > 1 Then Exit Sub
If IsNumeric(Target) And Target.Address = "$H$3" Then
Select Case Target.Value
[Code] .....
From the above the macro runs only with the Range H3, I would like have this code operate for the Range H3 to H10... I can't quite get it to work with a few formats I have tried.
View 3 Replies
View Related
Jun 8, 2009
I have been battling with excel for weeks now trying to get some data to display the way I want it to.
The plan is to enter (into individual cells) some letters, some lower case, some upper case ie, A A a A a C d. Some of these will be displayed together in another cell like this: AAaA, AaCd. My problem is that I want them all to be displayed Upper case letters first, lower case second like this: AAAa, ACad. No amount of my inexperienced fumbling with excel's tools has worked so far.
I am playing around with a table for genetics so if my results in a cell are aAbBCcdD, I need it to display: AaBbCcDd. Is it possible?
View 14 Replies
View Related
Feb 12, 2014
I have a report and users will need to key in password while opening. Currently, i am using inputbox and it works exactly like what i expected. However, the only downside is that i cannot mask the password.
I am aware that I have to use userform to do so. How to replace the input box with userform and still deliver the same result.
I know how to create a user from with title, text box, OK and Cancel buttons, and that's it. How to put it in my current code.
Below are the codes that I currently have. There are 4 possible outputs.
[Code].....
View 14 Replies
View Related
Oct 15, 2008
Select Case Condition Not Being Met
View 4 Replies
View Related
Oct 16, 2008
I don't see what I am doing wrong in this code using "Select Case". When activated and the correct string is entered I should get a msgbox pop up.
View 8 Replies
View Related
Jan 20, 2009
How would I set up a series of CASES depending on the Target.Value (a doubleclick code within spreadsheet) such that IF target value isblank, then change to Ö. If target value is Ö, then change to "NA". If target value is "NA" then clear contents
Would CASE be the best way to go or a series of IF's?
View 3 Replies
View Related
Feb 2, 2009
I seem to be unable to crack the bug in my macro... I want to define 2 variables before launching the next macro with the defined variables.
When I run this macro - the debugger points all the time to the following line: ...
View 4 Replies
View Related
Apr 17, 2009
Is there any difference between these 2 codes:
View 12 Replies
View Related
