More Than One Case Selects
Feb 17, 2012
Is there a way to do multiple case selects. For example if I have A3=2012 and A4=COMPANY NAME do this. I don't want to use if and for this because I have several company names in this list and think case would be easier. So far I have the following attached code but this pastespecial should only occur if the value of A3=2012 as well.
Code:
Select Case Cells(i, 1).Value
Case "COMPANY NAME"
Range(Range("B" & i), Range("E" & i)).Copy
Sheets("Abbott Label").Select
Range("b45").PasteSpecial
View 9 Replies
ADVERTISEMENT
Aug 26, 2009
I have a string of names that run together without spaces or commas between each name.
"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.
Is there a way to add a comma and space between a lower case and upper case letter?
View 7 Replies
View Related
May 8, 2008
Sub Addy()
Do Until ActiveCell. Offset(0, -4) = ""
Renamer = Proper(ActiveCell)
ActiveCell = Renamer
ActiveCell.Offset(1, 0).Select
Loop
End Sub
fail? Trying to remove all capitals from names/addresses. Error message is "compile error - sub or function not defined"
View 6 Replies
View Related
Jun 3, 2009
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
View 9 Replies
View Related
Apr 22, 2009
I decided to try to change it into a Case Statement. Here is what I have now. But the problem seems to be this time at this line: When I have "01" in C5 the script just keeps going?
View 14 Replies
View Related
Jun 20, 2008
When I use a simple formula such as:
=upper(a1)
that will obviously change whatever is in a1 to Upper Case - but it will put it in the cell that holds the formula.
What I want to know is:
Is there any way I can format the cell to run the formula when the information has been pasted into the spreadsheet
View 9 Replies
View Related
Jul 3, 2014
i am trying to set up a data validation list for the user to select the options from the 'reason' column' but the input in the box would be the 'code' corresponding to the reason
i.e drop down list would show me the' reasons' but when selected it would input the 'Code' only
View 14 Replies
View Related
Jan 25, 2009
I have this code below which autofilters a range and selects the data i need, there is also a small offset part that leaves the active cell as the one in the top lef of the needed data. I also have the row count of the data in cell G1. What I need to do is something along the lines of:
View 3 Replies
View Related
Oct 8, 2009
Say you have two columns, A & B. Each cell in column A consists of an identical drop-down menu of four possible choices. Each cell in B is a random number. I want to sum the cells in B according to what the user selects from the drop down in column A. If A1=A2="BILL", I want the sheet to add B1 and B2. IF A1=A3="BILL", and A2=A4=TOM, I want the sheet to sum B1 and B3, then sum A2 and A4. So, conceptually, I guess column A acts as a group identifier, and I want to sum B by group.
View 2 Replies
View Related
Sep 16, 2013
Each month we receive an updated budget which includes info for every month of the budget year. I want the user to be able to select the column (which relates to a month) that they want to use for the analysis. I will use the data in this column only for analysis. How can I do that?
View 3 Replies
View Related
Aug 9, 2007
I have a worksheet with approx. 100 form checkboxes. The cell behind each box holds it's TRUE/FALSE condition, which is something I check for elsewhere on another worksheet.
I need one 'SELECT ALL' checkbox which, when selected, will 'check' every one of these 100 checkboxes (change their conditions to TRUE).
Ideally this would be done thru an excel formula, but I've looked everwhere and not found anything that will permit this.
View 6 Replies
View Related
Feb 4, 2009
i am trying to do something along the lines of. a For Next Loop that selects the cell N6 and inserts the formula.
$K$7*F6+$L$7
then fill down to the cell N754
then selects O6 and inserts the formula
$K$8*F6+$L$8
then fill down to cell O754. repeating this until there are no more values in either the K or L column. in the attatched spreadsheet i have deleted the values from 50 something down to 754 but the idea is still the same.
so that each formula inserted keeps the cell from column K and L constant when filled down but F changes, then when the next column is used(ie. from column N to O), the next row in the K and L is used but F starts from F6 and changes as it is filled down again.
View 5 Replies
View Related
Jan 31, 2008
I am trying to write a macro, but am failing at it.
Basically, what I am trying to do is:
----------------------
Select a whole row, for example 5
Define that row as "Ceiling"
Then select a row a few steps down, for example 18
Define that row as "Floor"
Then select the range (ceiling, floor)
Then print that area.
-----------------------
But I have no idea how to write the code.
View 9 Replies
View Related
Nov 24, 2008
My worksheet with macros gets messed up when a user selects either multiple cells from column F or selects multiple cells in any one row (but only if column F is included) in the range C17:O116 and hits "delete". I will either do an exit sub, an application.redo, or something similar so that this doesn't happen, but I don't know how to write the code to trigger these events. So I need a way to determine "if the user selects multiple cells in column F and hits delete" or "if a user selects multiple cells in any row from 17 to 116 that includes the cell in row F, and hits "delete.""
Set Rng = Range("F17:F116")
Set rng2 = Range("K17:K116")
Set Rng3 = Range("L17:L116")
View 3 Replies
View Related
Nov 29, 2011
The code below adds the date to D:D once the user enters data in B:B and then adds the time when the user selects from a dropdown in C:C. When they have finished the task they enter anything into F:F and then it enters the end time in G:G.
This works well except for one flaw and one modification that I can't get to work. I have found that people retrospectively change the activity in C:C which causes the start time to change. I would like to avoid this hapenning if possible by putting some code in to stop this. Also I would like the times to be related to the push of a button on the sheet and therefore need different code.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("B2:B900")) Is Nothing Then
With Target(1, 3)
.Value = Date
[Code] ......
View 3 Replies
View Related
Oct 2, 2013
A list box selection works fine on my computer but on a friends Windows Vista PC the following happens:
Selecting items near the top of the list works fine. 1/4 of way down a mouse click on an item selects the Next item.
1/2 of the way down in the list, the mouse click on an item selects the one 2 or 3 further down, etc., etc.
View 1 Replies
View Related
Jan 29, 2009
I'm wondering if someone can help me with this. I am using the excel calendar control and trying to activate it when a user selects a specific cell "C3". I can get it to activate when I move off the cell, but it's not working when they click on the cell.
Sheet1
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("C3")) Then
Call OpenCalendar
MsgBox "Calendar"
End If
End Sub
Userform2 (I have this code under here)...............................
View 9 Replies
View Related
May 2, 2014
For example, I have a master sheet that has a drop-down list of the months January and February, which have their own sheets. I am trying to populate the sales of the week 1, 2 ,3 ,4 in the master sheet based on the same data for the month chosen.
View 2 Replies
View Related
May 27, 2014
I have a userform for inputting information to a spreadsheet using the code below. It works fine however if the user does not select a radio button to select a score its saving the rest without it. How can I ensure the user selects a score,,,, ob10, ob8, ob6, ob4, ob2, obna.
[Code] ......
View 2 Replies
View Related
Mar 3, 2012
Is this possible? If
A B C
0 0 0
0 0 0
1 4 5
2 4 8
0 0 0
0 0 0
0 0 0
2 6 9
8 9 3
3 5 6
0 0 0
In the raw data, the 0s split up the data into different steps. I am trying to create a function that selects the data from the ABC column and puts it into new columns for each step. I.e:
New Columns with:
1 4 5
2 4 8
and
2 6 9
8 9 3
3 5 6
In the raw data files, there will be 10 steps, with a varying length of data.
View 2 Replies
View Related
Aug 26, 2012
I'm trying to write a macro that selects cell A1 in each sheet within the book. I've written the following code:
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
However, it produce this message: "Run-time error '1004': Select method of Range class failed."
If I slightly modify the code to
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Select
Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
It works fine. I'm curious why this happens.
View 6 Replies
View Related
Jul 20, 2006
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies
View Related
May 15, 2007
I'm trying to compare two range values within a macro to see if they match...if they do/don't I capture and write some other data.
One list is lowercase, while the other list is UPPERCASE.
My current macro needs them to be in the same case because I'm using the following to compare:
If VPNID.Value = BuildHRName Then
How can I change the format of one of the lists to UPPERCASE or lowercase so that I am comparing apples to apples?
View 9 Replies
View Related
Nov 17, 2009
if there's any way for vba to detect if each individual character in a string is in caps, and if so, convert to lower case, and if it's in lower case, convert to capitalized
The text will vary in length and content... so he wants to see how we can change:
"This Is Strange" to "tHIS iS sTRANGE"
"THIS IS STRANGE" to "this is strange"
"this is strange" to "THIS IS STRANGE"
View 2 Replies
View Related
Nov 16, 2010
Whenever she clicks on a cell, the cell to the right of it is also selected. When she tries using tab to move to a new cell, she can only move between the two selected cells. Same with using the enter key. As such, it is extremely difficult for her to modify only one cell, since she always has two selected.
The F8 key, as well as Ctrl+F8. However, pressing the F8 key only adds more cells to the autoselection, and Ctrl+F8 allows her to select one cell, but also highlights the cells around it, and when we tried to select other cells, every cell we clicked stayed highlighted.
Additionally, sometimes when she clicks a cell, it will just select that one cell. Click it again, and the problem is back. I haven't been able to determine any patterns to this behavior, and I know there is no problem with the input (the keyboard and mouse are standard-issue in our lab, and we keep them well maintained).
View 8 Replies
View Related
Sep 25, 2006
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
View 3 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Apr 22, 2009
I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies
View Related
Jun 1, 2012
I have a macro which I recorded, then modified. The first thing it does is to freeze the top row, then it goes looking for a particular row and inserts some formulae. Nothing complicated at all.
It WAS working perfectly, but I wanted some improvements in the insertion of the formulae. I got that working just fine, but now the panes freeze in the wrong place. No matter what I do, it freezes at cell I16. I want only the top row frozen.
Found this code which was reported to work:
PHP Code:
ActiveWindow.FreezePanes = False Range("A1").Select ActiveWindow.FreezePanes = True
It still freezes at I16. I have tried shutting down Excel, and even my computer, in case it is some weird bug where something is stuck in memory.
I tried recording another macro to format some cells and also freeze the top row. Same result.
PHP Code:
Sub wraptext_top_row()'' wraptext_top_row Macro''
Rows("1:1").Select With Selection
.HorizontalAlignment = xlCenter
[Code] ..........
Same result. I tried copying the contents of the worksheet to Notepad, then into a fresh workbook, just in case there's some weird hangup in formatting that I can't see.
There is NOTHING in the original code that references that cell, or even that row or column. NOTHING. How it got hung up on that one cell I cannot fathom.
The Freeze Panes command works normally if I apply it manually. Any cell, anywhere, it works as expected.
View 1 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
