how I can get the text that is reflected in the Edit bar for cell A1 of the attachment to display fully within the cell boundriesof A1? I've reseached Qzgrid and found no previous answers. Is it an Excel 2003 bug that I just have to live with? You will see I've set the Text Control under Format Cells > Alignment to "Wrap text".
View 3 Replies
I have a sheet that copies text info (merged and centered cell)from a cell in another sheet (text alt+enter to create more line), the text wrap is on, however i have to manually expand the cell to see all of the text
View 2 Replies View RelatedCurrently working on an excel worksheet. I merged 5 rows to a single cell. Want to be able to auto fit all the textl. Enabled auto wrap but when the contect surpass the 5 rows, only portion of the text are appearing. Any way to force the cell to autofit whatever text is within?
View 4 Replies View RelatedI have below formula in a cell but it populates as a single continuous text. I want it to appear as only 3 lines as below....
View 7 Replies View RelatedIs there a way to specify if there are 46 characters in a cell, to apply text wrap, indent the second line, and resize the row height to 25.5?
For example, I always will have text on merged cells B7:C7. I'd like to have a macro that determines if the text goes over C7 (I figured that it would take 46 characters to do this), that the merged cells will be text wrapped, then row 7 will be resized to 25.5.
I know how to record a macro that will text wrap and resize the row height but am not sure how to do the "if" condition.
This is not related to macro - it's an excel question regarding wrapped-around text within a cell (i.e.: text brought onto next line by <Alt>+<Enter>)...
SayI have the following in a cell :
Car<Alt>+<Enter>
Truck<Alt>+<Enter>
Van
and say I want to add a figure (in this example 1A) to the first part of the cell and then another to the second line of wrapped text and so on. How can I split the cell (or lookup the first 'wrapped' line) so that I can then perform changes (using formulas with '&' to combine etc or whatever) so that in the end cell have the following:
Car 1A<Alt>+<Enter>
Truck 2C<Alt>+<Enter>
Van 1B
I need to count the number of Carriage returns in a string of text in a group of merged cells also I need to add a carriage return after the 1024 character because I have the wrap text on. My overall goal is have copy text fit into a group of merged cells without any being cut off by excel.
View 4 Replies View RelatedI have a worksheet where i need three columns at fixed widths and in one of these columns i need the text to wrap. I have a macro and have included a wrap text function in it but it doesn't seem to wrap text!! No cells are merged and the row height has not been altered from the default height. I would very much appreciate if one of you could look at the macro(pasted below) and tell me why the text won't wrap. I have looked through forums and found answers to this question, but none of the solutions I have come across seem to work
View 11 Replies View RelatedI added a shortcut Button using a Macro on the Menu Bar on Word Wrap (Format > Cells > Alignment > Tick Wrap Text). However, that button is working only on the Workbook I created. When I created the macro, I did not have the option of putting it in "Personal Macro Workbook"? How can I make that button work on all Worksheet I operate in Excel from now?
View 2 Replies View Relatedhow to wrap the text on a combobox located on a userform?
View 4 Replies View RelatedText Wrap in TextBox within an Excel form. I can’t get text to wrap within a textbox even though the “Wrap” option is selected for “True” in the textbox properties. The textbox value is from a cell that has text within it. The textbox code is: Me.txtC1 = Format(Worksheets("Data").Range("T46"), "0")
The form code is: Me.txtC1.Value = Worksheets("Data").Range("T46").Value
How do I get it to wrap?
Whenever word wrap is applied the text is not visable in the cell. It
remains visable only in the bar above.
I have already confirmed autofit and it reduces the column to 1 character
wide.
I tried detect and repair on the installation and nothing.
I even upgraded from Excel 2k to Excel 2003 and no change.
how to go about wraping text in the attached drop down lists?
View 4 Replies View RelatedThis is my current code to unwrap text for a given range
[Code]......
I would like to build in a IF function to say if the given range is unwrapped (Cells.WrapTEXT = False) THEN wrap the range (Cells.WrapTEXT = True) i.e. everytime the macro button is clicked it will wrap and unwrap the data range
Is there a shortcut or more efficient way to select wrap text than:
right clicking > format > alignment > wrap txt & left horizontal align?
I'm trying to execute something like this: [URL] ......
but without changing the cell value... I basically want a button that will wrap/unwrap all of the cells in the "B" column with one click. If i have to do the cell range for every individual cell in column B that's fine, but I can't seem to make the above example work while keeping the cell contents the same.
want to merge cells!
I have several columns "A" thru "J" with simple contents, part#, qty, date, etc. and in column "K" descriptive text which can run several sentences long.
I'm trying to record a macro to insert a row, merge "A" thru "J" in that new row, cut the text from the "K" cell in the row above and select wrap text so it shows up below those headings so my user can read it.
Would look like:
I can get it to look like that if I grab the row borders and drag it to fit, but can I get it to increase row height and wrap to fit the text length automatically with the macro?
Code looks like this so far:
Keyboard Shortcut: Ctrl+Shift+M
Dialog box pops up "This operation will cause some merged cells to unmerge.
I'm going to have a shortcut key in the macro to do this one row at a time, as the data isn't that extensive, but I don't want to have to drag all the row heights.
A user inputs a string into a message box. A particular cell on a worksheet is then given the value of this string. I would like to have this cell automatically format to Wrap Text if the string is longer than 100 characters and skip to the next line after each 100 characters. However, if 101th character is part of a word, then that word would be on the next line. If the string is less than 100 characters then the cell is simply given the value of the inputted string ( I know how to do this )
View 3 Replies View RelatedI found referred to writing a vba code such as the one below:
Sub Format()
Rows(x).entirerow.autofit
End Sub
I have tried a vba code such as the one above but the issue persists.
I have a worksheet with merged cells [horizontal]; each cell is also formatted to warp text.
The issue is that the row size or cell size [vertical] does not adjust when the user types more text than what the cell size can handle.
I have been playing with custom formats recently and I'm wondering if there is anyway to make them wrap?
specifically I have several results that I have been formatting to show what they are related to
397235 visitors 392648 visitors 365487 visitors
I want these to display as visitors, but still be numbers so that they can be summed etc.
The problem is that I need the text to wrap so that visitors is on the second line in the cell. unfortunatley all i get is a ########## error to show the cell is not wide enough even with wrap text turned on.
I have a sheet that has a section in range (c18:k25) (it is merged and text is wrapped) If that amount of space is not adequate to fit all their information I would like to add a macro that when activated it asks how many rows would you like to add and then based on that number whether it be 1-10 it would insert a new row to that merged range so they can continue adding more information . I have the sheet locked down to prevent changes so it would have to be unlocked and then re-locked within the macro.
View 1 Replies View RelatedI understand that the wrap text feature doesn't work if you are merging cells.
I have a document that users will be able to input certain cells but not others...the document needs to be protected so they can't change formulas etc.
I have a number of cells where I've put to wrap text, but the cell size is not adjusting when I type past the size of the cells, how do I get the cells the get bigger automaticly to fit all the text but bigger in height not length?
View 2 Replies View RelatedIs there a way to get cells in a column to adjust their height automatically, or with a macro to account for text overflow/wrap?
For example, lets say a column is 200 px in width and it's height is enough to view a single line of text, and the column is set to wrap text. Now more text is entered into the cell and it needs to be re-sized to fit two lines of text.
Is there a way to create a macro button to have this done automatically?
I have a exel file which has been exported from Access to exel. There are many cells which shows the data as in Cell A1 with the Linefeed character in between data in a cell. Is there any way (may be using a macro) where I can remove the character and get it to display as B1 in the same cell(A1). The file is attached herewith.
View 5 Replies View RelatedI have a need to merge cells in a row and there to be more than one line of data in the merged cell. I also format it to wrap text. But I found that when doing this with merged cells it won't automatically resize the height of the row to accomodate the wraped text. It can be done manually, but this is a pain.
View 13 Replies View RelatedHow do I get the text to wrap inside the text box? I have the Wordwrap property of the textbox = True.
View 6 Replies View RelatedI have a section of my sheet to have the data in the cell word wrapped.
Is there any way to set it up so the row height automatically changes when there is more than one line of data?
Right now if my cell reads:
The other day
we went to the
market.
It shows:
market.
Meaning only the last line of the data. I'd like it to automatically make the row height change to show the three rows. (And change any of the other rows where there is a cell with more than one line of data)
I would like some code that would wrap if(iserror) around a formula, so that if the result is an error then no text is shown. It would be good if I could select a range and the formula would be adjusted for all cells with formula in. (Would be even better if cells with references in could have if(isblank) instead!) I am currently spending ages adjusting all my formulas manually and haven't got time to try and work out how to do this with vba.(I'm not very experienced with it!)
e.g. =INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2)
would be come
=IF(ISERROR(INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2)),"",INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2))
I would like to simply reference this range of cells and change one formatting attribute.
VB: Sheets("flaggedSite report").Range(Cells(RowV, 2), Cells(RowV, 6)).WrapText = True
I get a runtime error 1004 with this???
VB:
With Sheets("FlaggedSite Report").Range(Cells(RowV + 1, 2), Cells(RowV + 1, 5))
'.Range(Cells(RowV, 2), Cells(RowV, 6)).WrapText = True
.WrapText = True
End With
This one runs but gives me unpredicted results. This one I think changes the format on my original sheet vs FlaggedSite Report.
VB:
With Worksheets("FlaggedSite Report")
With Range(Cells(RowV + 1, 2), Cells(RowV + 1, 5))
.WrapText = True
End With
End With
All I want to do is with as small a code as possible make a change to an inactive sheet of my choosing to the wrap format of a range of cells.
