Cell Value To Fire Macros

Oct 24, 2006

I wish to fire one of 2 different macros, depending on the Target.Text value.
If the Target cell (in a named range) is blank then one macro fires, If the cell has text then another macro fires.

this is what I have

If Target.Column = 7 And Target.Row > 7 And Target.Text <> "" Then ViewPicture Target
Else
If Not Target.Column = 7 And Target.Row > 7 And Target.Text <> "" Then GetPicture Target
End If

I can only get the first if statement to fire, I get an "ELSE IF" compile error on the second "IF"statement.

It is nested in the

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Page
and I would like to get it to work with Named Range's, but not enough understanding yet.

View 9 Replies


ADVERTISEMENT

Worksheet_Change Code: Determine How To Get The Code Below To Fire Whenever Cell J10 Is Populated

Jul 30, 2009

I am trying to determine how to get the code below to fire whenever cell J10 is populated and do nothing when cell J10 is not populated but I can't quite get it. (Cell J10 is manually changed and is not changed based off of a formula)

View 4 Replies View Related

Fire VBA, On "Locked,Protected And UnSelected Cell?"

Apr 29, 2006

I want a VBA function to fire "ONLY" when a cell is changed.Peramiters:
Data ertry range is full, Last cell in SubTotals range has changed from $0.00 to anything >, Last 3 cells are Locked, Protected and Unselectable Attached is a copy of the work book. I have posted on VBA Express and we have tried to solve this problem, We have come a long way. You might want to read the history link above.

View 4 Replies View Related

Fire A Sub Within A Sub

Jun 25, 2007

I have seen it on here, and I have searched, but cannot find how to start it, saves me writing it twice.

View 6 Replies View Related

Event Fire For Any Workbook

Jun 16, 2007

Is it possible have code in an addin that fires when, X happens in any workbook?

For example,

Any time a user tries to print a worksheet a message box pops up asking, "are you sure you want to print that"

View 9 Replies View Related

SaveCopyAs. Code Failing To Fire.

Jan 28, 2009

I have an Excel 2007 workbook with over a dozen user forms and plenty of code that I have mainly obtained from the web and tweaked to suit my needs. I am a novice with VBA, so not really up to writing anything but quite simple code.

My issue is I have some code set to fire on Workbook_Open that will save a versioned copy of the workbook, to the same network folder that the original resides in, with an incrementally increasing file name. the file is stored on a network, but access should not be an issue as I have full access and have no problem saving to this folder, also the event works fine up until I shut down Excel. I have also tried saving to My Documents to avoid the network issue, same result, worked fine as long as Excel is not closed, fails if I do.

It all works fine until I close down excel completely and re-open, where it then fails to work. There are other events happening in the same Workbook_Open sub that still work fine each time, so the sub is firing on open, but this one event fails. I get no error message at all, just no new file copy created.

The workbook is essentially doing the job of an Access database (I know even less about Access), I have a user form as a main menu and various other forms for various data entry and reporting tasks. I am exiting the w/book via a cmd button on the main menu (I've deliberately restricted users control, as many are not very pc literate). I have conducted numerous trials consisting of running the code from the VBA window, closing w/book via cmd button WITHOUT accepting the std save option and re-opening from Explorer window, closing w/book via cmd button WITH accepting the std save option and re-opening via Explorer and all worked perfectly over many sample runs. But when I closed Excel totally (Not just the w/book), created a desktop shortcut and opened from there, that line of code just doesn't seem to do anything, no error or hang or anything. The only way I can get it to function again, is to re-save the w/book (As either a new file with code edited to suit, or overwrite the original), and keep Excel open whilst only closing this w/book. It then functions perfectly again on opening.

I have enclosed below the Workbook_Open sub and some other subs that append to a user log on opening, these work fine all the time. I enclose the others in case they may have some bearing, as they are also fired from the Workbook_Open sub and show no issues at all.

Any suggestions gratefully accepted as I am struggling. As mentioned above, the ONLY part of the Workbook_Open sub that fails is the line "ThisWorkbook.SaveCopyAs newFileName". I have even added "MsgBox "The new FileName is: " & newFileName" immediately after it, and that displays new filename correctly. It seems to me to be hingeing around the SaveCopyAs event, but I don't want to assume that, being the novice I am.

View 12 Replies View Related

Finding The Right Javascript Function To Fire On

Mar 10, 2007

I am having a problem finding the right javascript function(s) to use in my macros. Use Google homepage as an example. The line

.Navigate "javascript:_dlsetp('ss=2')"

will open the page for customizing your Google page. But what is the function you fire on in the macro to execute the general search? I can send text to the search input box, but I can't find the function that runs the search.
Is there some way to quickly identify the function and the correct syntax without having to learn how all the source code in the web page works? Finding the right URLs, links, and input boxes is fairly straight forward. But not the functions.

View 9 Replies View Related

Friction Loss Calculator For Fire Hose

Apr 17, 2008

I am attempting to create a friction loss calculator for fire hose, I am using a known formula that calculates the loss based on volume and diameter for pipe. the difference that I have with fire hose in lieu of pipe is that the hose diameter changes with the pressure drop.

I have 3 variables that i input, pressure, beginning diameter and length. however
as the water flows through the line the pressure changes in turn the diameter changes, I would like to set up my spreadsheet so that the initial variables inputed yield the correct diameter, and then reference back to the initial equation and recalculate based on the yeilded diameter, and recalculates,

I can determine the friction loss at 1 foot, in turn determine the diameter at 2 foot, but I wish the spreadsheet to work the calculation over the entire length.

View 13 Replies View Related

Macro Causing Custom Function To Fire

Sep 3, 2007

I have a large file, part of which amongst other things calculates life expectancy from a range of q(x) values (proportion of people that die moving from age (x) to (x+1). Life expectancy is calculated using a user-defined function (below).

My problem is that whenever I run a macro that changes the file, even parts of the file that don't affect the cells using the life function, it jumps into the life function. (An example: copying and pasting values on a different sheet). This is a hassle when stepping through other macros using F8, not to mention the time cost.

Some further possibly necessary information: one macro uses the GoalSeek application to set the target cell that contains the life function

By the way, this didn't use to happen in older versions of a similar file. When running the GoalSeek macro to change target life expectancy it did, but not for any other macro.

Here is the function:

Function life(data As Range)

' Aims to calculate Life expectancy from Qx values
' It assumes first value of Q is Qb, then Q0 to Qmax

Dim Nobs As Integer
Dim j As Integer, i As Integer
Dim q() As Double
Dim L() As Double
Dim T As Double, le As Double

Nobs = data.Rows.Count

View 9 Replies View Related

Fire Chart VBA Code On Validation List Choice

May 8, 2009

very complex spreadsheet for weight & balance calculations. It's to the point where everything works perfectly in Excel 2007, but it must be used primarily with Excel 2003. Discovered that a crashing problem had to do with condtional formatting, that's all been cleared and will soon be fixed, but there's one that I just can't quite figure out.

I'm using the worksheet change event to trigger the update of charts... In this case, it's looking at a particular cell that has data validation on a dropdown as the trigger. Works perfectly in 2007, and if I put a msgbox prompt in to be launched by a change of that cell, it launches. I can put the chart update code in a separate sub and launch it manually every time, but I cannot call it from the worksheet change.

I've included attachments showing what I believe are the relevant bits of code -

View 9 Replies View Related

Fire An Event Or Action On Visual Basic Editor Close

May 26, 2009

Is there a way to make a macro fire when you close the VB editor. For example,
I would like one of my pre- recorded macros to start as soon as I close the VB editor.

View 9 Replies View Related

Check Multiple Cells, Fire Macro Based On Result

Jul 14, 2007

I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.

I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$12" Then
If Target.Value < 0.65 Then
Run "MyMacro"
End If
End If
End Sub

MyMacro loads a userform with buttons, etc.

View 4 Replies View Related

Worksheet_Change Event Wont Fire When Target Changed By ListBox Selection

Dec 5, 2008

Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then
'do something
End If
End Sub

Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.

But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.

View 4 Replies View Related

Encourage Enabling Of Macros: Disable Macros When Opening Then The Worksheet Menu Bar And Other Command Bars Are Still Available

Aug 26, 2009

I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.

View 6 Replies View Related

Change Event Causing Event To Fire Again

Aug 7, 2006

I have the following code, which works perfectly:

Private Sub Worksheet_Change(ByVal Target As Range)

Dim TotalDays As Integer

TotalDays = Range("C65536").End(xlUp).Row + 1

The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.

However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.

How do I add the following, to my previous code?

Range("E8").Value = Cells(7, 6) * 2.5

View 9 Replies View Related

Enable/Disable Macros When No Macros Are Present

Jul 28, 2008

I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.

I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.

No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?

View 9 Replies View Related

Macros - Average Every 5th Cell?

Jul 29, 2009

I have an excel sheet with time in column A and scientific data in column B. I would like to get a macro that averages every 5 values/cells.

View 9 Replies View Related

Macros - Average Every 5th Cell

Jul 30, 2009

I have an excel sheet with time in column A and scientific data in column B. I would like to get a macro that averages every 5 values/cells.

View 9 Replies View Related

Run Macros Based Cell Value

Dec 12, 2007

I am trying to create a macro based on value in a cell. For example if J2 is greater than 1 then run macro A. The code I have is:

If j2 > 1 then
Call MacroA


The file imported as a text tab deliminated file and I believe that even though J2 might be 10.05, it does show up in the formula bar as just 10.05 not =10.05. I don't if this makes a difference. The J2 cell could either bland or values ranging from 1 to 100. If it is blank I want to run a different macro.

View 2 Replies View Related

How To Delete Another WorkBook Macros Using Macros

Jul 23, 2005

What is the commands or script for deleting a macro automatically using
another workbook macro.

View 9 Replies View Related

Hiding Macros From The Run Macros List

Jul 14, 2008

Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.

View 9 Replies View Related

Macros In A Cell Function: Comparing 1 Value Against Another

Apr 29, 2006

Can I run a macro from a cell function in Excel 2003 with the idea of
comparing 1 value against another and if its true, it gets highlighted yellow?

View 14 Replies View Related

Absolute Cell References With Macros

Jul 31, 2006

can't seem to understand how to keep cells absolute when creating a macro

View 8 Replies View Related

Pass Cell Variable Between Macros

Jun 11, 2007

I have a macro that nicely select the named range that the active cell is in. I want to chain on to that macro a macro that has a parameter a range with that active selection. I dont see how to "take" the active selection on the worksheet from within the macro and pass it to another. I assume I could change the cellInRange macro to return a range, however I dont yet see how to do that.

View 2 Replies View Related

Macros Causing: Too Many Cell Formats

Jul 26, 2007

I have got several different workbooks that I use that contain macros that format cells. However, just recently I have had countless problems with the macros telling Excel to format certain cells. There seems to be no logic or order to this. Also, if I then try to format the cells by hand, I get the following error message: "Too many cell formats"

View 3 Replies View Related

Combine Two Macros And Run Them On Double Clicking A Cell

Mar 20, 2009

I have two pieces of code. The first one puts a tick mark in the cell when you double click it. The second one hides column B of another sheet if the value in cell A1 of Sheet1 is "a". I want to combine these two codes so that when I double click cell A1 of sheet1 it puts a tick mark in the cell and hides column B of Sheet2 and clears the contents of range B2:B50 of Sheet2.

View 4 Replies View Related

Save File By Cell Entry And Keep Macros

Apr 2, 2009

would like to save a spreadsheet with the contents of a cell as the name. My problem is that I have several macros in the workbook and if I change the name of the file when I save, it won't run the macros when I reopen because the filename has changed. It presents me with an error saying it can't find the macro.

View 9 Replies View Related

Call/Run Macros/Procedures Where Part Name In Cell

Oct 9, 2006

I have a value in a cell named subNo. whatever that value is I want that routine to be called. How do I concatenate Sub & the number?

Sub WhichSub()
Dim varSubNo As Integer
Dim mysub As String
varSubNo = Sheets("Main").Range("subNo").Value
Call Sub & varsubNo 'how do I concatenate this?
End Sub

View 5 Replies View Related

Increase Cell By 1 If Another Cell Changes A Value Using Macros

Dec 8, 2013

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "C2" Then Range("F2").Value = Range("F2").Value + 1
End Sub

I am using the follow macros code when I right click my spreadsheet and enter it in the window there. My intention is to increase the value in F2 every time the value in C2 changes to a specific text value. For instance, if C2 has the value "Alex" I want F2 to increase by 1 every time C2 changes to say "Joe" and only Joe. If it changes from Joe back to Alex that does not need to be counted, only changing it to Joe needs to increase the value in F2 by one each time.I also need to do this for all values in the spreadsheet from C2-C59 and increasing the corresponding cell in F2-F59.

View 6 Replies View Related

Open A Workbook And Run 1 Of 4 Macros Based On 3 Cell Values

Jul 30, 2009

I'd like to automatically run 1 of 4 macros depending on some criteria. Every workbook created has, unfortunately, the same worksheet name, so that leaves the only differences between the 4 possible loaded workbooks in the cells area and even those can be similiar in many ways. But....I found some criteria to separate all 4 workbooks...Here they are...

run macro 1 if this

1. Worksheet name says "Screen"
2. Cell H1 has the word "Lead"


run macro 2 if this

1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell H1 has the word "Lead"


run macro 3 if this

1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell N2 has the word "Delivered"

run macro 4 if this

1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell N2 has the word "Bevel"

I don't know if this can be done, but if so, that would be fantastic! I'm thinking that the macro would have to be "global" and in the user's personal workbook?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved