Macros - Average Every 5th Cell?
Jul 29, 2009I have an excel sheet with time in column A and scientific data in column B. I would like to get a macro that averages every 5 values/cells.
View 9 Replies
ADVERTISEMENT
Macros - Average Every 5th Cell
Jul 30, 2009I have an excel sheet with time in column A and scientific data in column B. I would like to get a macro that averages every 5 values/cells.
View 9 Replies View RelatedEncourage Enabling Of Macros: Disable Macros When Opening Then The Worksheet Menu Bar And Other Command Bars Are Still Available
Aug 26, 2009I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedEnable/Disable Macros When No Macros Are Present
Jul 28, 2008I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
Cell Value To Fire Macros
Oct 24, 2006I wish to fire one of 2 different macros, depending on the Target.Text value.
If the Target cell (in a named range) is blank then one macro fires, If the cell has text then another macro fires.
this is what I have
If Target.Column = 7 And Target.Row > 7 And Target.Text <> "" Then ViewPicture Target
Else
If Not Target.Column = 7 And Target.Row > 7 And Target.Text <> "" Then GetPicture Target
End If
I can only get the first if statement to fire, I get an "ELSE IF" compile error on the second "IF"statement.
It is nested in the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Page
and I would like to get it to work with Named Range's, but not enough understanding yet.
Run Macros Based Cell Value
Dec 12, 2007I am trying to create a macro based on value in a cell. For example if J2 is greater than 1 then run macro A. The code I have is:
If j2 > 1 then
Call MacroA
The file imported as a text tab deliminated file and I believe that even though J2 might be 10.05, it does show up in the formula bar as just 10.05 not =10.05. I don't if this makes a difference. The J2 cell could either bland or values ranging from 1 to 100. If it is blank I want to run a different macro.
How To Delete Another WorkBook Macros Using Macros
Jul 23, 2005What is the commands or script for deleting a macro automatically using
another workbook macro.
Hiding Macros From The Run Macros List
Jul 14, 2008Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies View RelatedMacros In A Cell Function: Comparing 1 Value Against Another
Apr 29, 2006Can I run a macro from a cell function in Excel 2003 with the idea of
comparing 1 value against another and if its true, it gets highlighted yellow?
Absolute Cell References With Macros
Jul 31, 2006can't seem to understand how to keep cells absolute when creating a macro
View 8 Replies View RelatedPass Cell Variable Between Macros
Jun 11, 2007I have a macro that nicely select the named range that the active cell is in. I want to chain on to that macro a macro that has a parameter a range with that active selection. I dont see how to "take" the active selection on the worksheet from within the macro and pass it to another. I assume I could change the cellInRange macro to return a range, however I dont yet see how to do that.
View 2 Replies View RelatedMacros Causing: Too Many Cell Formats
Jul 26, 2007I have got several different workbooks that I use that contain macros that format cells. However, just recently I have had countless problems with the macros telling Excel to format certain cells. There seems to be no logic or order to this. Also, if I then try to format the cells by hand, I get the following error message: "Too many cell formats"
View 3 Replies View RelatedAverage Column Of Cells But Ignore Errors And Return Average Of Numbers That Are There
Jun 14, 2013E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
Combine Two Macros And Run Them On Double Clicking A Cell
Mar 20, 2009I have two pieces of code. The first one puts a tick mark in the cell when you double click it. The second one hides column B of another sheet if the value in cell A1 of Sheet1 is "a". I want to combine these two codes so that when I double click cell A1 of sheet1 it puts a tick mark in the cell and hides column B of Sheet2 and clears the contents of range B2:B50 of Sheet2.
View 4 Replies View RelatedSave File By Cell Entry And Keep Macros
Apr 2, 2009would like to save a spreadsheet with the contents of a cell as the name. My problem is that I have several macros in the workbook and if I change the name of the file when I save, it won't run the macros when I reopen because the filename has changed. It presents me with an error saying it can't find the macro.
View 9 Replies View RelatedCall/Run Macros/Procedures Where Part Name In Cell
Oct 9, 2006I have a value in a cell named subNo. whatever that value is I want that routine to be called. How do I concatenate Sub & the number?
Sub WhichSub()
Dim varSubNo As Integer
Dim mysub As String
varSubNo = Sheets("Main").Range("subNo").Value
Call Sub & varsubNo 'how do I concatenate this?
End Sub
Increase Cell By 1 If Another Cell Changes A Value Using Macros
Dec 8, 2013Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "C2" Then Range("F2").Value = Range("F2").Value + 1
End Sub
I am using the follow macros code when I right click my spreadsheet and enter it in the window there. My intention is to increase the value in F2 every time the value in C2 changes to a specific text value. For instance, if C2 has the value "Alex" I want F2 to increase by 1 every time C2 changes to say "Joe" and only Joe. If it changes from Joe back to Alex that does not need to be counted, only changing it to Joe needs to increase the value in F2 by one each time.I also need to do this for all values in the spreadsheet from C2-C59 and increasing the corresponding cell in F2-F59.
Open A Workbook And Run 1 Of 4 Macros Based On 3 Cell Values
Jul 30, 2009I'd like to automatically run 1 of 4 macros depending on some criteria. Every workbook created has, unfortunately, the same worksheet name, so that leaves the only differences between the 4 possible loaded workbooks in the cells area and even those can be similiar in many ways. But....I found some criteria to separate all 4 workbooks...Here they are...
run macro 1 if this
1. Worksheet name says "Screen"
2. Cell H1 has the word "Lead"
run macro 2 if this
1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell H1 has the word "Lead"
run macro 3 if this
1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell N2 has the word "Delivered"
run macro 4 if this
1. Worksheet name says "Screen"
2. Cell B1 has the word "records" somewhere in the cell
3. Cell N2 has the word "Bevel"
I don't know if this can be done, but if so, that would be fantastic! I'm thinking that the macro would have to be "global" and in the user's personal workbook?
Setting Macros - Possible To Put Image In Comment Based On Value In Cell
Nov 12, 2012Is it possible to put image in comment base on the value in cell ?
For example
c1 c2 c3
R1 A
R2 B
R3 C
I can put A.jpg to C1R1"A", B.jpg to C2R2 "B", and C.jpg to C3R3
Or irregular arrangement ??
Macros To Save Worksheet Based On Cell Reference
Feb 12, 2009I have a macros ( code inserted ) as you can see in my code the macros save the workbook in any file name you chose just by changing the any filename option.
I would like this to be changed so that it saves based on a cell reference, say i has a name in lets say B10 i would like it to save as the name in B10.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.DisplayAlerts = False
Dim bk1 As Workbook
Dim bk As Workbook
Dim myfilename As String
Average Every Nth Cell
Jul 17, 2007what formula can i use to take the average daily excahange rate (and i have a list set up on worksheet) and make it an average weekly exchange rate? So that the formula recognizes data for each week (the weekly data is on a separate worksheet).
attached is an example of the data... trying to go from daily average to weekly average...
Average And Vlookup: Average The Grades With Appropriate Names
Dec 9, 2008i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
Average If Neighboring Cell Contains Certain Value
Jun 26, 2014I'm basically trying to create a gradebook for a class in which there are five categories of assignments, and each category is worth 20% of the final grade. I need to be able to calculate subtotals for each of the five categories as well as a final grade for the course. I have set up my workbook so that a code appears next to each grade that is entered. That code corresponds to the category as follows:
p = participation
o = organization
s = selfwork
g = OGT project
e = final exam
So I need a formula that will sum the values of any cells that have a "p" in the cell to the left, or any cells that have an "o" in the cell to the left, etc. I thought an array formula would work but apparently not if my range is made up of noncontiguous cells.
Here's how things look right now:Screen Shot 2014-06-26 at 10.21.36 PM.png
So, for example, I need a formula that will find that Kylie has earned 10 points on the OGT project (the green category).
Average Based On Certain Cell Value
Feb 20, 2014I have attached spreadsheet so it may visualize
What I want to do is enter a date in cell F2 and it will look up that value in column c and will then add up that days number and the 2 days numbers before that date in column d and average them out.
So in the example i have used 20 january 2014, the 20th ,19th and 18th of january have values of 100,40 and 10 so in cell I2 it should return the value 50 ( the average of the 3 numbers )
But this would change with new dates going in cell F2.
trial.xlsx
Average Every 6th Cell In A Column
May 10, 2006I need to get the average of every 6th cell in a column, excluding errors --- three times.
The first average should be every 6th cell beginning with z4, the second every 6th cell beginning with z6, and the third every 6th cell beginning with z8.
Is there an easy way to achieve these 3 averages?
Using A Cell Row Reference To Average?
Jun 6, 2013I am trying to average two cell references for the row component. I am unsure if INDIRECT is the correct function?
In cell A1 it displays the row number of the start of the range to average eg "49". Then in cell A2 it displays the row number of the end of the range eg. "107".
I need a way to change the row references in cell A1 and A2 easily and to change all subsequent formula.
So if I want to average the Column C, what would the formula be for the cell to display the result =average(C49:C107) but incorporating the references in A1 and A2?
Create Button In Excel With Macros Or VBA Code In A Specific Cell Targets?
Jul 9, 2014I have created a individual tracker spread sheet in each user system and on the spread sheet I have inserted 2 buttons in 1st sheet. when employee wants to take a break he has to click on the log out button and when he came back he needs to click on login button. I have another sheet named "timings" and I have created 2 columns, one is login and another is logout. What I need is when user click on the login button, the system time and date to be auto update under login column and when he clicks on logout button the system time and date to be auto update under logout column.
View 14 Replies View RelatedCreate Macros To Print Area With Data Using Different Cell Format To Fit In One Page?
Feb 6, 2014I have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print()
'
' Set_Print Macro
' set printing area and print
[Code]......
If & Average Statement (depending On Another Cell)
Jun 7, 2009I have two sub-system tabs (IAS & CCTV) and one calculations page (estimate). I need G3 (estimate) to give me the total price of hours sold on a project.
Because the systems hours can be marked up differently I wrote an average formula. But I need to add an IF statement saying if there is no hours in the sub system then ignore the hour price.
if this formula doesnt take this into account and I delete H3 (CCTV tab) then the overall price of hours sold in estimate will be wrong.
I have attached the sheet.
Average Of Every Other Cell Excluding Zeros?
May 9, 2013I current have an Excel doc that I am trying to pull averages from. Every row has data that needs to be averaged but I only need every other cell. And I cannot have zeros in the average because it will skew the data. Also if the average for a row ends up being 0, I want that average to show up as 0 not #DIV/0!. From Column H to EE I need to average each row individually.
I came up with the below formula.
=IF(SUM(H1:H1:J1:J1:L1:L1)=0, "0", AVERAGEIF(H1:H1:J1:J1:L1:L1, ">0")
It works but Its not practical because I have to manually enter all of the cells that it pulls from.