Can I change the color of a cell based on my deviation from the number based above it? I am making a golf spreadsheet to base my performance off of, and I was wondering if I could make the cell change color based on my performance on the hole (different color for how many strokes above or under par). If anyone has any idea on this issue, please let me know.
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I'm putting the sum of 3 cells in a 4th cell(D2). If the sum is greater, I would like the sum to be the color green. If the sum is less, I would like the sum to be the color red. Is this possible?
(D2) has change value, I want to compare the new value against the existing one.
I'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
View 2 Replies View RelatedI have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
I'm trying to change the tab color based on a cell value. This I can do, but only using a Change Event with code in the Worksheet section. I would like it to update more instantly and without the need for a Change on the sheet to occur. So I was thinking a Worksheet_Activate event, or perhaps a Workbook_Activate event, but i can't get it to work.
For further info, if not confusing, the cell referenced in code below (on the Dan sheet) is filled using a user entered variable when the workbook is opened. Depending on this value, i would like the tabs to update their color accordingly and instantly, as well as the color updating if the cell B3 on the sheet is changed. Perhaps I need a Worksheet Activate & Deactivate and Workbook Activate and Deactivate?
Public sPeriod As Long
Private Sub Worksheet_Change(ByVal Target As Range)
sPeriod = Worksheets("Dan").Cells(2, 4).Value
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "B3" Then
Select Case UCase(Target.Value)
Case sPeriod - 1: ActiveSheet.Tab.Color = RGB(0, 0, 255)
Case Else: ActiveSheet.Tab.Color = RGB(255, 0, 0)
End Select
End If
End Sub
How to Change The Tab Color Based On A Cell Date ( Thursday & Friday ) Green Color, Rest of the week blue.
View 2 Replies View RelatedI have a large spring-selection table, which is populated with things like "4.88 x 635" and "5.26 x 584". There are 1520 fields in the table populated with any combination of the 432 springs available for selection. The spreadsheet takes my criteria, finds out which springs it's allowed to choose from, and populates the table. It could be 20 springs, could be 30. I'm trying to get the number down to 10. The table updates when I change the criteria.
What I'm after at this point is a macro which will color-code the table based on the cell contents, so that all the "4.88 x 635" have one color and all the "5.26 x 584" have another colour. Doesn't have to be any particular colour, just so long as it's a bit different to the cells around it. how the table reacts.
The biggest spring size is "6.93 x 1727", which could be converted to a color reference, perhaps by adding up all the digits, or taking out the non-digits and dividing by 123781, I don't know I'm thinking out loud. And then just assign the cell color to that number.
Where to start a macro like this. Obviously it would use ActiveCell.Interior.ColorIndex but I can't find anything like this on the web.
I have cells in range L12:BN1000 with formulas that will output a 1 or a 2.
If the output is 1, I would like the cell to color yellow
if the output is 2, I would like the cell to color orange
the reason I dont want to use conditional formatting is because the use needs to be able to copy and insert rows and by doing so the use would need to manually add the new cells into the conditional format range. I would like to come up with a macro that applies this condition to a large range.
also, were do I add this macro? under sheet1? this workbook? or as a module?
I'm using Excel 2003- and I am trying to change the fillColor of a cell based on the value of that cell.
11111122222222233333333344455555555555556666777888
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
I'd like the result to look something like this-
11111122222222233333333344455555555555556666777888
I've looked at the similar threads in this Forum, but I couldn't find exactly what I needed.
In an excell worksheet I need to change the color of a cell within a column based on the date entered. For example, if the date in the cell is 60 days from today's date then the cell should be green, if the date in the cell is 90 days from today's then the cell should be blue, if the date in the cell is 120 days from today's date then the cell should be yello.
View 9 Replies View RelatedI want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
View 2 Replies View RelatedI want to change the color of a cell's background based on valid data in the cell. I have a pull-down list, it uses a named list, and this all works fine. I want the cell to be red, and then after the user selects a valid entry from the pull-down list, I want to change the cell to yellow.
View 2 Replies View RelatedI have a dynamic drop down list using OFFSET and want to change a selection of cell colors based on the drop down selection. My drop down list is located in cell G4 and the cells I want to change are
=$C$9,$C$10,$C$11,$B$11,$B$12,$C$12,$B$13,$C$13,$C$14,$C$15,$H$15,$H$14,$H$13.
These are random cells. There is no value in the cells, I just want to change the color from green to gray.
I am having an excel sheet where I enter the delivery dates. There are few freezes and restricted dates.
When I am entering the delivery date which falls under the freeze or restricted date, the colour of that cell should change.
How to achieve this either using some macro.
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
I looked around at some date functions and could not find one to work.
I have a sheet that has 365 days. When I load the sheet I want to cell for today to be highlighted in some way..... color or just active.
If date = 05-10-2007 then
BackgroundColor = 17
else
BackgroundColor = 9
end if
Let Sheet 1 have data in 3 columns to support a standard bubble chart
Col A: X Values
Col B: Y Values
Col C: Bubble Size
Id like to be able to color the bubbles according to the Y values, whether the Y values fall within the following ranges
Green for Y <=2
Orange for 2<Y<=5
Red for Y > 5
Im assuming some straightforward VB code is in the works but Im not quite there yet
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedVBA macro to change the color of a cell automatically for a specific period of time -say 5 minutes, based on the value the subject cell holds at that time. The cell value is not manually entered but comes from a sub.
There will be hundreds of such cells so that the macro must be able to be repeated for other cells utilizing their individual cell values as well.
I'm trying to get conditional formatting to change the cell color based on a few conditions.
I want the cells in column D to turn red if;
- The number in column B has a match in column A
- And the corresponding cell in column C is not blank
- And the corresponding cell in column D is blank
In the example below, cell D4 should be red
If there's a match (Column B to Column A) and;
- If cell in column C is not blank and cell in column D is not blank, do nothing.
If there's a match (Column B to Column A) and:
- If cell in column C is blank and cell in column D is blank, do nothing.
Here's the formula I attempted but didn't get it to work.
IF(AND(C2"",D2=""),MATCH(B2,$A$2:$A$15,0),IF((AND(C2"",D"")),"",""))
My Excel skills are basic at best, with no knowledge of VBA other than finding the VB Editor. What I'm trying to do: Attached is the file I'm working with, to give you a better idea. When a name is selected in column B, the cells in the non corresponding columns E to N should have a black background color. For example, when you select Mike in column B, the cells in that row in columns I to N, named Dave and Dean, should become black. If you select the name Dave, columns E to H (Mike) and M to N (Dean) should become black. In addition, the background color of the non-black cells should change depending on the status.
OK : green
FAIL: red
N/A: orange
Exceptions: blue
The attached file shows a few possible results, manually entered.
I have a chart full of different names which I need to separate them by color when a specific entry is found in a Cell. For example the list has the store name "ZELLERS" + its branch number. (ex. ZELLERS #276 PL or ZELLERS #295 SL and so on). I would like to modify the below code so that It only check for the name ZELLERS and not the branch number. If it finds ZELLERS in any cell In the Range of C1:C500 then color it Red.
Below Code does that but I have to write the exact name as it appears in the cell otherwise it wont find it for me. Is there any way to resolve the issue? I am not an Excel Programmer but Only an Excel user.
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Set r = Range("C1:C500")
If Intersect(Target, r) Is Nothing Then
Exit Sub
End If
On Error GoTo Endit
Application.EnableEvents = False
vals = Array("ZELLERS #276 PL", "ZELLERS #295 SL", "Gopher", "Hyena", "Ibex", "Lynx")
nums = Array(3, 46, 6, 3, 7, 4, 20, 10, 23, 15)
For Each rr In r..........................
I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies View RelatedI have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
I have excel sheet with colored cells.
Positive cash flow cells all have green background,
Negative cash flow cells, all have red background.
I calculate all the "sub- total" columns into one "total sum" cell. Based on this "total sum" I want the cell background to be red if the total sum is negative, or green if total sum is positive. How do I make the cell change to the proper background color based on whether it's a negative or postive total sum?
