When I click on a button I would like an option to cancel a row range of cells by turning the writing red with a cross through it.
So if I wanted to cancel a certain row of data I would click on a button, enter the range of cells to cancel and then this would turn all of the writing in the cells to red colour with a strike through the words.
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
What formula do i use if i want the text in cell A1 to change to red if any entry is made in cell B1.
View 2 Replies View RelatedI am having some color problems. From A2:AB2000 I have different fill colors for cells all over the place. The only color I need is the color purple which I believe is the color “39”.
So basically all cells except the cells with the color purple change to white from A2:AB2000. I would like to add this code to the macro I have already created.
I'm trying to put together a script which changes the color of the row in columns A:AE if any cell in the Range B7:B400 has the value of 'No'. If it has the value of 'Yes' I would like it to Exit Sub.
I've put together the code below to try an create this function, but I'm running into a few problems.
Code:
If Intersect(Target, Range("B7:B400")) Is Nothing Then Exit Sub
If Selection.Cells.Count > 1 Then Exit Sub
If Target "No" Then[code]....
When the value of any cell in Range B7:B400 is 'Yes' the row changes to grey, if I enter 'No' it removes all cell shading from the row, and I'm not very clear on what changes I need to make.
I've got some spread sheets that I send out. People fill them out and send them back to me. The only problem is that I dont know which cells they've changed and which cells they've left. Is thier a way to tell VB to change the color of a cell if the value has changed
View 9 Replies View RelatedI have to check a cell to see if ti has a date in it, if so , then i have to check the current date to another cell, if the current date is greater then that cell i want to change the color of the cell
i need to add this in a macro that i previously created
here is what i need, i hope its clear for everyone to understand
I want to be able to change a color of a row to purple if a cell is greater than 5 days
so basically what i need is something like this
IF BQ1 has the data "APPROVED" and data in BP1 is 01/04/10 and BN1 is blank and if BN1 is blank after 5 days of BP1 then the color of this row changes to purple
I want to change the row color after the value in one of the cells equals a certain value. What is the best/easiest way to accomplish this?
View 9 Replies View RelatedI'm putting the sum of 3 cells in a 4th cell(D2). If the sum is greater, I would like the sum to be the color green. If the sum is less, I would like the sum to be the color red. Is this possible?
(D2) has change value, I want to compare the new value against the existing one.
I would like to change the default color of any excel sheet I use to grey from the standard white and I am struggling to find out how this is achieved.
In other words, I am trying to have all cells in the sheets I work with appear grey on my screen by default. A coworker of mine used to work in banking and she has grey cells but does not know how she changed them.
I'm trying to do. I have 2 columns, both have empty cells with borders. I would like to make it so that when the user clicks one of the cells, it turns grey and the one beside it turns white. I set up two macros as follows:
View 3 Replies View RelatedI'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
View 2 Replies View RelatedI ran a quick code to see if this would work. it did at first then stopped.
Code:
Private Sub Worksheet_SelectionChange(ByVal target As Range)
tcol = target.Column
trow = target.Row
If Cells(trow, tcol).Interior.ColorIndex = -4142 Then Cells(trow, tcol).Interior.ColorIndex = 8
If Cells(trow, tcol).Interior.ColorIndex = 8 Then Cells(trow, tcol).Interior.ColorIndex = -4142
MsgBox trow & " " & tcol & " " & Cells(trow, tcol).Interior.ColorIndex
End Sub
In short I am trying to toggle between color/no color when a cell is selected. I got the -4142 from using the MsgBox to determine the value. Should I be approaching this differently?
I have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
VBA code to do the following.
In F147 will go a value
Then if the value of F147 is greater than 20 the color of D144 would turn green.
I am working on a code in which i have to change the color of certain cells if the value of a cell is Y/N. The color should change with the user input.
Set wsheet = wbook.Worksheets("XYZ")
For Row_start=10 to Row_count 'Row count is the last used row in the worksheet
RowValue = ActiveCell.Row
colValue = ActiveCell.Column
if colValue = 17
[Code] ....
Is there VBA code that will:
a) change the color of the active cell?
b) return the formatting back when that cell is no longer active?
Here is a screen shot of what I have:
I want to be able to enter the name from the above 4 cells (B3,B4,B5,B6) IN THAT COLUMN, and have the active cell change color accordingly.
If I am in cell C7 and start to type "PUBLIX" It should turn red in color. It does not because the code looks to a specific cell (example: B3). What can I change in my code to give the results I desire?
I have conditional formatting code below I copied from THIS site:
Private Sub Worksheet_Change(ByVal Target As Range)
' Multiple Conditional Format
Dim rng As Range
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Adjust Format range to suit
Set rng = Range("B7:H74")
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
' Adjust conditions to suit
Select Case Target.Value
Case Range("B6").Value
Target.Font.ColorIndex = 50 ' Green
Case Range("B5").Value
Target.Font.ColorIndex = 3 ' Blue
' Case "Super"
' Target.Font.ColorIndex = 6 ' Yellow
Case Range("B4").Value
Target.Font.ColorIndex = 13 ' Purple-ish
Case Range("B3").Value
Target.Font.ColorIndex = 5 ' Red
' Case "Corporate"
' Target.Font.ColorIndex = 37 ' Light Blue
End Select
End Sub
I would like to have a vba code that changes the cell color so that if there is number 1 (just number 1) in some cell the background of the cell changes in to shade of grey and cell that has number 2 changes into darker shade of grey and so on. I have numbers 1-10 in random order in my sheet. I mean there is many cells that has the same number and the sheet is quite large so vba code would be ideal choise to do it quickly.
View 9 Replies View RelatedAs an example:
Cells C7:F7 are currently shaded light green. Cells G7:L7 are shaded light blue. M7 is shaded dark blue. N7:Q7 are shaded light yellow and R7:T7 are shaded light gray.
When any cell in that range (C7:T7) is clicked (selected), I want the cell color to change to it's normal color; like light yellow to yellow, light blue to blue, dark blue to blue, light green to green and finally light gray to gray.
These cells represent headings for a database. When a heading is selected, the database will sort by that column and the header will change colors. I can do the sort code.
If another header is chosen, the previous selection will need to revert back to it's lighter color and the new selection will change as above... so only ONE cell will be changed from it's "normal state" color at a time. This will serve as an indicator as to which column is being used for the sort. To the user, it will have the appearance of switching on and off.
If any other cell on the sheet is selected, then this should not trigger an event change.
This appears to be so simple, I've searched the forums and have found almost the right VB code but not quite.
I have a 3000 row spreadsheet with various columns.
Column M can either be PASS, FAIL, REJECTED, IN PROGRESS or NOT ASSESSED.
I need the rows (A to M inclusive) to change colour and text colour dependent on this condition.
I almost had an answer with Select.Case but I couldn't get the formula to work with text, only numbers.
I'm trying to change the tab color based on a cell value. This I can do, but only using a Change Event with code in the Worksheet section. I would like it to update more instantly and without the need for a Change on the sheet to occur. So I was thinking a Worksheet_Activate event, or perhaps a Workbook_Activate event, but i can't get it to work.
For further info, if not confusing, the cell referenced in code below (on the Dan sheet) is filled using a user entered variable when the workbook is opened. Depending on this value, i would like the tabs to update their color accordingly and instantly, as well as the color updating if the cell B3 on the sheet is changed. Perhaps I need a Worksheet Activate & Deactivate and Workbook Activate and Deactivate?
Public sPeriod As Long
Private Sub Worksheet_Change(ByVal Target As Range)
sPeriod = Worksheets("Dan").Cells(2, 4).Value
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "B3" Then
Select Case UCase(Target.Value)
Case sPeriod - 1: ActiveSheet.Tab.Color = RGB(0, 0, 255)
Case Else: ActiveSheet.Tab.Color = RGB(255, 0, 0)
End Select
End If
End Sub
In Excel 2007 I been scanning in the forum for example code. If a cell is clicked on Then highlight the that row from cells A to K. If it is clicked again change it back to no color.
View 9 Replies View RelatedI am trying to hyperlink to a cell, & i want to change the color of this cell after the hyperlink activated.
Found code on this site to change the color of the active cell. One problem and two questions. Code works, however, when you save and close the last active cell is stuck with the new color. Question1 is it possible to limit this code to cells in column B only and fix the problem above? Is there an easier better way to get the same result. See Attached
View 2 Replies View Related